UNT Libraries Government Documents Department - 1,165 Matching Results

Search Results

(02.2) Scoping experiments; (02.3) long-term corrosion testing and properties evaluation of candidate waste package basket material

Description: The work described in this activity plan addresses Information Need 2.7.3 of the Yucca Mountain Site Characterization Plan (l), which reads Determination that the design criteria in lOCFR60.130 through 60.133 and any appropriate additional design objectives pertaining to criticality control have been met. This work falls under section WBS 1.2.2.5 2 (Basket Materials) of WBS 1.2.2.5 (Waste Package Materials) in the Work Breakdown Structure of the Yucca Mountain Site Characterization Project.
Date: December 20, 1996
Creator: VanKonynenburg, R. A.

2-D Axisymmetric Line Transport

Description: The methods used in the ALTAIR code for computing the transfer of spectral line radiation in two-dimensional axially-symmetric geometry are described. ALTAIR uses a variable-Eddington-tensor approach, in which the transfer equation of non-coherent line scattering is written in moment form, and the moments are closed with an assumed tensor relating the monochromatic pressure tensor and energy density; this Eddington tensor is obtained self-consistently using an accurate angle-dependent solution of the transfer equation. The finite element method for solving the moment system, and the discontinuous finite element method for solving the S{sub n} equation of transfer are described. Two applications of the method are discussed: line formation in uniform cylinders with different length-diameter ratios, and monochromatic transfer on an irregular x-y mesh (the Mordant test problem). 13 refs., 2 figs.
Date: November 20, 1990
Creator: Castor, John I.; Dykema, Pieter G & Klein, Richard I.

3-D TECATE/BREW: Thermal, stress, and birefringent ray-tracing codes for solid-state laser design

Description: This report describes the physics, code formulations, and numerics that are used in the TECATE (totally Eulerian code for anisotropic thermo-elasticity) and BREW (birefringent ray-tracing of electromagnetic waves) codes for laser design. These codes resolve thermal, stress, and birefringent optical effects in 3-D stationary solid-state systems. This suite of three constituent codes is a package referred to as LASRPAK.
Date: July 20, 1994
Creator: Gelinas, R. J.; Doss, S. K. & Nelson, R. G.

100-D Area technical baseline report

Description: This document is prepared in support of the 100 Area Environmental Restoration activity at the US Department of Energy`s Hanford Site near Richland, Washington. It provides a technical baseline of waste sites located at the 100-D Area. The report is based on an environmental investigation undertaken by the Westinghouse Hanford Company (WHC) History Office in support of the Environmental Restoration Engineering Function and on review and evaluation of numerous Hanford Site current and historical reports, drawings, and photographs, supplemented by site inspections and employee interviews. No intrusive field investigation or sampling was conducted. All Hanford coordinate locations are approximate locations taken from several different maps and drawings of the 100-D Area. Every effort was made to derive coordinate locations for the center of each facility or waste site, except where noted, using standard measuring devices. Units of measure are shown as they appear in reference documents. The 100-D Area is made up of three operable units: 100-DR-1, 100-DR-2, and 100-DR-3. All three are addressed in this report. These operable units include liquid and solid waste disposal sites in the vicinity of, and related to, the 100-D and 100-DR Reactors. A fourth operable unit, 100-HR-3, is concerned with groundwater and is not addressed here. This report describes waste sites which include cribs, trenches, pits, french drains, retention basins, solid waste burial grounds, septic tanks, and drain fields. Each waste site is described separately and photographs are provided where available. A complete list of photographs can be found in Appendix A. A comprehensive environmental summary is not provided here but may be found in Hanford Site National Environmental Policy Act Characterization (Cushing 1988), which describes the geology and soils, meteorology, hydrology, land use, population, and air quality of the area.
Date: August 20, 1993
Creator: Carpenter, R. W.

300 area TEDF permit compliance monitoring plan

Description: This document presents the permit compliance monitoring plan for the 300 Area Treated Effluent Disposal Facility (TEDF). It addresses the compliance with the National Pollutant Discharge Elimination System (NPDES) permit and Department of Natural Resources Aquatic Lands Sewer Outfall Lease.
Date: November 20, 1998
Creator: BERNESKI, L.D.

500 CFM portable exhauster temperature and humidity analysis

Description: 500 cfm portable exhausters will be utilized on single shell tanks involved in saltwell pumping. This will be done, in part, to remove flammable gases from the tank vapor space. The exhaust filter train, fan, stack, and associated instrumentation and equipment are mounted on a portable skid. The design analysis and basis for the skid system design are documented in reference 1. A pumped drainage collection system is being added to the existing portable exhausters. Additional equipment and instrumentation are also being added to the exhausters, including a vacuum pump cabinet and a generic effluent monitoring system (GEMS). The GEMS will provide sampling and monitoring capabilities. The purpose of this analysis is three fold. First, to determine the maximum saltwell tank vapor space temperature. Second, to determine an allowable exhauster inlet air temperature increase to ensure the humidity is less than 70%. Third, to assess potential adverse temperature effects to the continuous air monitor (CAM) sample head. The results of this analysis will be used to ensure that air stream temperatures in the portable exhausters are increased sufficiently to prevent condensation from forming on either the pre or HEPA filters without adversely effecting the CAM.
Date: May 20, 1999
Creator: BIELICKI, B.E.

105KE and 105KW Basins fuel and sludge consolidation study, summary report

Description: This study is a summary report that examines and evaluates the feasibility of consolidating irradiated fuel and sludge currently in KE Basin with that in the KW Basin. This study was conducted in support of TPA Milestone (target date) M-34-00-T03. The report summarizes three supporting engineering studies involving: (1) spent fuel consolidation into the single basin, (2) transport of the encapsulated fuel between KE and KW Basins, and (3) dispositioning contaminated water remaining in KE Basin. From the three reports, and preferred storage method, transfer method and water disposition method were defined. These consolidation methods were then evaluated against the no action alternative of continued storage using both KE and KW Basins. The report concluded that the fuel and sludge currently stored in KE Basin not be consolidated in the KW Basin, primarily due to increased cost and radiation exposure required to consolidate the fuel and sludge. Consolidation is more attractive for storage periods beyond the year 2002, which is the study period of the report.
Date: September 20, 1994
Creator: Gant, R. G.

18th U.S. Department of Energy Low-Level Radioactive Waste Management Conference. Program

Description: This conference explored the latest developments in low-level radioactive waste management through presentations from professionals in both the public and the private sectors and special guests. The conference included two continuing education seminars, a workshop, exhibits, and a tour of Envirocare of Utah, Inc., one of America's three commercial low-level radioactive waste depositories.
Date: May 20, 1997

21st Century jobs initiative - Tennessee`s Resource Valley. Progress report 1995

Description: Tennessee`s Resource Valley, a regional economic development organization, was asked to facilitate a two-year, $750,000 grant from the Department of Energy. The grant`s purpose is to make the East Tennessee region less dependent on federal funds for its economic well-being and to increase regional awareness of the advantages of proximity to the Department of Energy facilities in Oak Ridge. Tennessee`s Resource Valley`s mission is to market the mid-East Tennessee region`s business location advantages to corporate decision makers and to facilitate regional initiatives that impact the creation of quality job opportunities. Tennessee`s Resource Valley represents the following fifteen (15) counties in East Tennessee: Anderson, Blount, Campbell, Claiborne, Cocke, Grainger, Jefferson, Knox, Loudon, Monroe, Morgan, Scott, Sevier, and Union.
Date: December 20, 1995

Accelerator mass spectrometry in biomedical research

Description: Biological effects occur in natural systems at chemical concentrations of parts per billion (1:10{sup 9}) or less. Affected biomolecules may be separable in only milligram or microgram quantities. Quantification at attomole sensitivity is needed to study these interactions. AMS measures isotope concentrations to parts per 10{sup 13--15} on milligram-sized samples and is ideal for quantifying long-lived radioisotopic labels that are commonly used to trace biochemical pathways in natural systems. {sup 14}C-AMS has now been coupled to a variety of organic separation and definition technologies. The primary research investigates pharmacokinetics and genotoxicities of toxins and drugs at very low doses. Human subject research using AMS includes nutrition, toxicity and elemental balance studies. {sup 3} H, {sup 41}Ca and {sup 26}Al are also traced by AMS for fundamental biochemical kinetic research. Expansion of biomedical AMS awaits further development of biochemical and accelerator technologies designed specifically for these applications.
Date: October 20, 1993
Creator: Vogel, J. S. & Turteltaub, K. W.

Acceptability of Bettis Laboratories waste shipment to WHC solid waste

Description: The purpose of this document is to evaluate a potential discrepancy between the Solid Waste Management (SWM) Criticality Prevention Specifications and a proposed waste receipt from Bettis Laboratories. This analysis resolves an apparent discrepancy between two different requirements of the Central Waste Complex and 200 Area Low-Level Burial Grounds Criticality Prevention Specifications (CPS-SW-149-00002 and CPS-SW-149-00003 respectively). The analysis is being performed to enable Solid Waste Management to accept a specific package from Bettis Laboratories. This package meets the requirements of section 2.1.1 in that the total fissile content of the drum is less than 200g and the waste occupies greater than 20% of the container volume. The package may not appear, however, to meet the requirements of section 2.1.5 for maximum enrichment of uranium bearing waste, as will be described below. Based on this analysis for this specific package, the waste is shown to be critically safe under all conditions for which the 55-gallon drums (17C, 17H, or UN1A2) specification applies. This package can be accepted under the 55-gallon drum limitations on fissile quantity. No change to the CPS is required.
Date: April 20, 1995
Creator: McDonald, K. M.

Achieving high performance in numerical computations on RISC workstations and parallel systems

Description: The nominal peak speeds of both serial and parallel computers is raising rapidly. At the same time however it is becoming increasingly difficult to get out a significant fraction of this high peak speed from modern computer architectures. In this tutorial the authors give the scientists and engineers involved in numerically demanding calculations and simulations the necessary basic knowledge to write reasonably efficient programs. The basic principles are rather simple and the possible rewards large. Writing a program by taking into account optimization techniques related to the computer architecture can significantly speedup your program, often by factors of 10--100. As such, optimizing a program can for instance be a much better solution than buying a faster computer. If a few basic optimization principles are applied during program development, the additional time needed for obtaining an efficient program is practically negligible. In-depth optimization is usually only needed for a few subroutines or kernels and the effort involved is therefore also acceptable.
Date: August 20, 1997
Creator: Goedecker, S. & Hoisie, A.

Acoustic Wave Chemical Microsensors in GaAs

Description: High sensitivity acoustic wave chemical microsensors are being developed on GaAs substrates. These devices take advantage of the piezoelectric properties of GaAs as well as its mature microelectronics fabrication technology and nascent micromachining technology. The design, fabrication, and response of GaAs SAW chemical microsensors are reported. Functional integrated GaAs SAW oscillators, suitable for chemical sensing, have been produced. The integrated oscillator requires 20 mA at 3 VK, operates at frequencies up to 500 MHz, and occupies approximately 2 mmz. Discrete GaAs sensor components, including IC amplifiers, SAW delay lines, and IC phase comparators have been fabricated and tested. A temperature compensation scheme has been developed that overcomes the large temperature dependence of GaAs acoustic wave devices. Packaging issues related to bonding miniature flow channels directly to the GaAs substrates have been resolved. Micromachining techniques for fabricating FPW and TSM microsensors on thin GaAs membranes are presented and GaAs FPW delay line performance is described. These devices have potentially higher sensitivity than existing GaAs and quartz SAW sensors.
Date: September 20, 1998
Creator: Baca, Albert G.; Heller, Edwin J.; Frye-Mason, Gregory C.; Reno, John L.; Kottenstette, Richard; Casalnuovo, Stephen A. et al.

Adaptable Multivariate Calibration Models for Spectral Applications

Description: Multivariate calibration techniques have been used in a wide variety of spectroscopic situations. In many of these situations spectral variation can be partitioned into meaningful classes. For example, suppose that multiple spectra are obtained from each of a number of different objects wherein the level of the analyte of interest varies within each object over time. In such situations the total spectral variation observed across all measurements has two distinct general sources of variation: intra-object and inter-object. One might want to develop a global multivariate calibration model that predicts the analyte of interest accurately both within and across objects, including new objects not involved in developing the calibration model. However, this goal might be hard to realize if the inter-object spectral variation is complex and difficult to model. If the intra-object spectral variation is consistent across objects, an effective alternative approach might be to develop a generic intra-object model that can be adapted to each object separately. This paper contains recommendations for experimental protocols and data analysis in such situations. The approach is illustrated with an example involving the noninvasive measurement of glucose using near-infrared reflectance spectroscopy. Extensions to calibration maintenance and calibration transfer are discussed.
Date: December 20, 1999
Creator: THOMAS,EDWARD V.

Adapting an x-ray/debris shield to the cascade ICF power plant: Neutronics issues

Description: A neutronics analysis has been carried out to determine the effects on the Cascade ICF reactor concept of adding a solid-lithium x-ray and debris shield to each ICF capsule. Results indicate that tritium breeding in LiAlO{sub 2} is possible with a modest isotopic enhancement in {sup 6}Li (to 15%). The shallow-burial index is greater than 1 (indicating that deep burial may be required) if the blanket is kept in the reactor for more than 2.5 yr. Nine percent of the total thermal power is unrecoverable. Parts of the chamber wall may require replacement once during the reactor life due to radiation damage. Part of the SiC chamber end cap must be replaced annually. The reactor may not require any nuclear-grade construction. 20 refs., 4 figs., 3 tabs.
Date: December 20, 1990
Creator: Tobin, M.T.

Adaptive Spindle Balancing Using Magnetically Levitated Bearings

Description: A technological break through for supporting rotating shafts is the active magnetic bearing (AMB). Active magnetic bearings offer some important advantages over conventional ball, roller or journal bearings such as reduced frictional drag, no physical contact in the bearing, no need for lubricants, compatibility with high vacuum and ultra-clean environments, and ability to control shaft position within the bearing. The disadvantages of the AMB system are the increased cost and complexity, reduced bearing stiffness and the need for a controller. Still, there are certain applications, such as high speed machining, biomedical devices, and gyroscopes, where the additional cost of an AMB system can be justified. The inherent actuator capabilities of the AMB offer the potential for active balancing of spindles and micro-shaping capabilities for machine tools, The work presented in this paper concentrates on an AMB test program that utilizes the actuator capability to dynamically balance a spindle. In this study, an unbalanced AMB spindle system was enhanced with an LMS (Least Mean Squares) algorithm combined with an existing PID (proportional, integral, differential) control. This enhanced controller significantly improved the concentricity of an intentionally unbalanced shaft. The study included dynamic system analysis, test validation, control design and simulation, as well as experimental implementation using a digital LMS controller.
Date: September 20, 1999
Creator: BARNEY,PATRICK S.; LAUFFER,JAMES P.; PETTEYS,REBECCA; REDMOND,JAMES M. & SULLIVAN,WILLIAM N.