UNT College of Engineering - 81 Matching Results

Search Results

Adaptación de un modelo de claros para el estudio de la dinámica de un bosque estacional en los llanos occidentales de Venezuela
Article discussing the adaptation of a gap model to the study of the dynamics of a seasonal forest in the western plains of Venezuela.
An Analysis of the Habitat of the Greater One-Horned Rhinoceros Rhinoceros Unicornis (Mammalia: Perissodactyla: Rhinocerotidae) at the Chitwan National Park, Nepal
This article uses geographic information systems and landscape-level data obtained from remote sensing sources to build a habitat suitability index model for the Greater One-horned Rhinoceros.
Analyzing the Effectiveness of Microlubrication Using a Vegetable Oil-Based Metal Working Fluid during End Milling AISI 1018 Steel
This article describes a study in which a vegetable oil-based lubricant was used to conduct wear analysis and to analyze the effectiveness of microlubrication during end milling AISI 1018 steel.
Atomic Distribution in Catalytic Amorphus Metals
This article investigates the atomic distribution in catalytically active metallic glass alloys using three-dimensional atom probe microscopy.
Atomic simulations of twist grain boundary structures and deofrmation behaviors in aluminum
This article investigates twist grain boundaries with molecular dynamic simulations to reveal their atomic structures, energy and interactions with dislocations.
Attitudes and behaviors towards risky driving among adolescents in Saudi Arabia
This article investigates perceptions and attitudes of school youth concerning risky driving behaviors in Saudi Arabia.
Bioabsorbable zinc ion induced biphasic cellular responses in vascular smooth muscle cells
This article explores the short-term effects of extracellular Zn²⁺ on human smooth muscle cells.
Bottom-up assembly of metallic germanium
This article demonstrates that free electrons from distinct 2D dopant layers coalesce into a homogeneous 3D conductor using anisotropic quantum interference measurements, atom probe tomography, and density functional theory.
Centimeter Scale Patterned Growth of Vertically Stacked Few Layer Only 2D MoS₂/WS₂ van der Waals Heterostructure
This article reports the chemical vapor deposition (CVD) growth of large-area (>2 cm²) patterned 2D vdW heterostructures composed of few layer, vertically-stacked molybdenum disulfide and tungsten disulfide.
Chemistry of Supraglacial Ponds in thte Debris-Covered Area of Lirung Glacier in Central Nepal Himalayas
This article examines elevation trends and their control by seasonality, dominant geochemical processes, and season dynamics in these supraglacial ponds at elevations ranging between 3989 and 4292 m above sea level in the debris-covered area of Lirung glacier in central Nepal Himalayas, from November 2010 to October 2011 on a bimonthly basis.
Classifying genes to the correct Gene Ontology Slim term in Saccharomyces cerevisiae using neighbouring genes with classification learning
Article discussing research on classifying genes to the correct gene ontology slim term in Saccharomyces cerevisiae using neighbouring genes with classification learning.
Competition Between Resonant Plasmonic Coupling and Electrostatic Interaction in Reduced Graphene Oxide Quantum Dots
This article presents a study of the plasmonic interaction that effects the optical properties of light emission from graphene oxide system.
Controlling the length scale and distribution of the ductile phase in metallic glass composites through friction stir processing
This article demonstrates the refinement and uniform distribution of the crystalline dendritic phase by friction stir processing of titanium based in situ ductile-phase reinforced metallic glass composite.
Determining Whether and When People Participate in the Events They Tweet About
This paper describes an approach to determine whether people participate in the events they tweet about.
Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing
This article presents the development of wood flour (WF)-filled polylactic acid (PLA) composite filaments for a fused deposition modeling (FDM) process with the aim of application to 3D printing.
Discovery via Integration of Experimentation and Modeling: Three Examples for Titanium Alloys
This article uses case studies to describe three examples of critical experiments that have been conducted in an integrated fashion with modeling activities for titanium alloys, providing valuable information in an accelerated manner.
Dual-Wavelength Terahertz Metasurfaces with Independent Phase and Amplitude Control at Each Wavelength
This article describes the design of a dual-wavelength achromatic metasurface-based deflector deflecting the incident wave to the same direction at two selected wavelengths, which has circumvented the critical limitation of strong wavelength dependence in the planar metasurface-based devices caused by the resonant nature of the plasmonic structures.
Effect of Cr addition on γ-γ' cobalt-based Co-Mo-Al-Ta class of superalloys: a combined experimental and computational study
This article deals with effect of Cr addition (10 at.%) on the partitioning behavior and the consequent effect on mechanical properties for tungsten-free γ-γ' cobalt-based superalloys with base alloy compositions of Co–30Ni–10Al–5Mo–2Ta (2Ta) and Co–30Ni–10Al–5Mo–2Ta–2Ti (2Ta2Ti).
Effect of Impregnated Inorganic Nanoparticles on the Properties of the Kenaf Bast Fibers
This article evaluates the properties of the chemically retted kenaf bast fiber impregnated with the inorganic nanoparticles.
Effects of Carbonization Temperature and Component Ratio on Electromagnetic Interference Shielding Effectiveness of Woodceramics
This article explores the effects of carbonization temperature and mass ratio of wood/resin on electromagnetic interference, shielding effectiveness, and morphology of woodceramics.
An Efficient Code-Based Threshold Ring Signature Scheme with a Leader-Participant Model
This paper proposes a novel code-based threshold ring signature scheme with a leader-participant model.
Enhancing elevated temperature strength of copper containing aluminum alloys by forming L1₂ Al₃Zr precipitates and nucleating θ" precipitates on them
This article presents a new approach in designing an Al-based alloy through solid state precipitation route.
Evaluation of Anthropogenic Air Emissions from Marine Engines in a Coastal Urban Airshed of Texas
This article provides a brief description of the adopted methodology for estimating anthropogenic emission estimation of ocean going vessels and barges.
Evaluation of Superficial and Dimensional Quality Features in Metallic Micro-Channels Manufactured by Micro-End-Milling
This article focuses on a set of experiments in the micro-milling of channels made of aluminum, titanium alloys and stainless steel.
Evaluation Results of an E and ET Education Forum
This article discusses evaluation results of an Engineering (E) and Engineering Technology (ET) education forum at the University of Houston. A central focus to these discussions revolved around whether Engineering and Engineering Technology exist as separate fields or whether there was value in thinking about them as part of a continuum.
Fabrication of Wood-Rubber Composites Using Rubber Compound as a Bonding Agent Instead of Adhesives
This article describes fabricating wood-rubber composites using rubber processing to improve water resistance and mechanical properties.
Facile, scalable synthesis of edge-halogenated graphene nanoplatelets as efficient metal-free eletrocatalysts for oxygen reduction reaction
Article on facile, scalable synthesis of edge-halogenated graphene nanoplatelets as efficient metal-free electrocatalysts for oxygen reduction reaction.
Fuzzy logic scheme for tip-sample distance control for a low cost near field optical microscope
This article proposes a fuzzy logic control scheme for a control algorithm used with a scanning near field optical microscope.
Habitat Quantity of Red-Cockaded Woodpecker Picoides Borealis (Aves: Piciformes: Picidae) in its Former Historic Landscape Near the Big Thicket Naitonal Preserve, Texas, USA
This article quantifies pine-forested habitat suitable for Red-cockaded Woodpecker in the former historic range of the species to assess the potential for possible re-colonization.
A High-Precision Micropipette Sensor for Cellular-Level Real-Time Thermal Characterization
This article reports the development of a novel glass micropipette thermal sensor fabricated in a cost-effective manner.
Hybrid boron nitride-natural fiber composites for enhanced thermal conductivity
This article finds that the synergy of natural fiber with hexagonal boron nitride (hBN) could significantly improve thermal conductivity, compared with that solely using hBN.
Improvement of Scratch and Wear Resistance of Polymers by Fillers Including Nanofillers
This article reviews approaches for improvement of tribological properties of polymers based on inclusion of fillers.
Inferring Temporally-Anchored Spatial Knowledge from Semantic Roles
This paper presents a framework to infer spatial knowledge from verbal semantic role representations.
Influence of PEEK Coating on Hip Implant Stress Shielding: A Finite Element Analysis
This article proposes a design concept for hip implants, using a combination of metallic stem with a polymer coating.
Influence of Silanization Treatment on Thermomechanical Properties of Multiwalled Carbon Nanotubes: Poly(methylmethacrylate) Nanocomposites
This article reports results for functionalized as well as unfunctionalized carbon nanotube polymer composites.
An innovative project and design oriented electrical engineering curriculum at the University of North Texas
Article discussing an innovative project and design oriented electrical engineering curriculum at the University of North Texas.
Interdisciplinary progress in food production, food security and environment research
Article discussing interdisciplinary progress in food production, food security and environment research.
Interfacial structures and energetics of the strengthening precipitate phase in creep-resistant Mg-Nd-based alloys
This article discusses the study of two interfaces– {112}β1/{1100}Mg and {111}β1/{1120}Mg– that are commensurate with β1/hcp-Mg orientation relationship via first principles calculations.
Leaf spectra and weight of species in canopy, subcanopy, and understory layers in a Venezuelan Andean Cloud Forest
Article discussing leaf spectra and the weight of species in canopy, subcanopy, and understory layers in a Venezuelan Andean cloud forest.
A Low-Cost Energy-Efficient Cableless Geophone Unit for Passive Surface Wave Surveys
This article presents a hardware design for a low-cost energy-efficient geophone system to better facilitate field applications of the passive surface wave survey.
Modeling analysis of the impact of anthropogenic emission sources on ozone concentration over selected urban areas in Texas
This article discusses a regional photochemical modeling experiment set up to simulate a high ozone episode of September 11-14, 2002 to evaluate the impact of various anthropogenic emissions sources on ozone concentrations.
Modeling immune response and its effect on infectious disease outbreak dynamics
This article presents a model that incorporates individuals' immune responses to further examine the role of the collective immune response of individuals in a population during an infectious outbreak.
A Network Control Theory Approach to Modeling and Optimal Control of Zoonoses: Case Study of Brucellosis Transmission in Sub-Saharan Africa
Article on a network control theory approach to modeling and optimal control of zoonoses and a case study of brucellosis transmission in sub-Saharan Africa.
A Novel Space Partitioning Algorithm to Improve Current Practices in Facility Placement
This article discusses a novel space partitioning algorithm to improve current practices in facility placement.
A Novel Topology Link-Controlling Approach for Active Defense of Nodes in Networks
This article proposes a novel topology link control technique and mitigation attacks in real-time environments.
On B.S.E and B.S.ET for the Engineering Profession
Article discussing biological systems engineering (B.S.E.) and a proposed model for baccalaureate programs for engineering education.
Optical method for distance and displacement measurements of the probe-sample separation in a scanning near-field optical microscope
This article presents an alternative optical method to determine the probe-sample separation distance in a scanning near-field optical microscope.
Optomechanical Design for Precision Lens Positioning and Mounting
This article presents a lens positioning and mounting in a few microns accuracy using a kinematic mount module.
Out of School and into STEM: Supporting Girls of Color Through Culturally Relevant Enrichment
This article explains how teachers can adapt traditional STEM enrichment activities to support girls of color through culturally relevant institutional practices.
Oxidation behavior and microstructural decomposition of Ti-6Al-4V and Ti-6Al-4V-1B sheet
This article conducts a direct comparison between the oxidation behavior of Ti-6Al-4V and Ti-6Al-4V + 1B to elucidate whether the addition of boron to Ti-^Al-4V impacts the oxidation behavior.