UNT Libraries - Browse

ABOUT BROWSE FEED

The Impact of Expanding Technical Knowledge on the Beginning Industrial Arts Teacher

Description: This study measures technical preparation and job demands among North Texas State University industrial arts graduates teaching in high schools. In addition to data from professional literature and the NTSU Bulletin, questionnaire mailings reveal that most graduates consider themselves qualified although recommending more semester hours of industrial arts for certification. They also affirm the practical value to the teacher of experience in industry. The study recommends narrowing the number of areas in industrial arts preparation and providing a more specialized teacher-training program with greater uniformity of semester hours.
Date: August 1974
Creator: McCulley, Charles R.

A Study of the Knowledge and Skills of Mobile Home Metalworkers in the Dallas-Fort Worth Area

Description: The purpose of this study was to determine the required knowledge and skills of mobile home metalworkers in the Dallas-Fort Worth area as compared to the Industrial Arts metalworking curriculum presented in Texas Education Agency, Bulletin 615. Items of significance in Chapter IV appear in findings, conclusions, and recommendations. The "use of basic hand tools" and "safety concepts" were consistently emphasized and required by manufacturing firms. It was found that educational requirements were quite often "some high school" or less. It was found that Industrial Arts metalworking curriculum was closely related to required knowledge and skills of mobile home metalworkers. It was recommended that Industrial Arts course work be extended into lower levels of education.
Date: May 1974
Creator: Cosper, Larry T.

A Study of the Drafting Curriculum in the Fort Worth Public High Schools, Fort Worth, Texas

Description: This is a study of the drafting curriculum in the Fort Worth public high schools, Fort Worth, Texas.The specific purposes or the study were as follows: 1. To review and compare the courses and content of the drafting curriculums listed in the bulletins of the TEA and the Fort Worth Public Schools. 2. To study drafting scheduling procedures in each of the Fort Worth public high schools. 3. To study the courses and contents of the drafting curriculums offered in each of the Fort Worth public high schools. 4. To determine if there are variations from school to school in curriculum content of the drafting courses in each of the Fort Worth public high schools. 5. To offer suggestions and recommendations for improving the program, if weaknesses were evident, when the program was evaluated by acceptable criteria (12, 13, and 14).
Date: December 1973
Creator: Agee, David W.

The Extent to Which Work and Training Beyond High School are Influenced by Industrial Arts

Description: The purpose of this study was to determine the influence industrial arts had on post-high school students in regard to their present field of work or study. The respondents were working in or pursuing additional education in fields directly related to the industrial arts courses they took in high school.
Date: August 1973
Creator: Brooks, Bill D.

A Study of Contemporary Industrial Arts Education and Industrial Technology Education Programs

Description: This study is an investigation of the baccalaureate degree requirements in industrial arts education and industrial technology education with special emphasis on the similarities and differences between the two curriculums. The criteria used as a basis for comparison are (1) clarification of terminology, (2) historical trends in the development of the present programs, (3) basic program philosophies, (4) curriculum content, (5) objectives sought by each curriculum, (6) number of graduates from each program, and (7) employment of the graduates.
Date: August 1973
Creator: Russum, Isaac J.

A Study of the Skills and Knowledge Required of Plastics Employees in the Dallas Metropolitan Area

Description: The primary purpose of this study was to identify the skills and knowledge required of employees in the plastics industry in the Dallas Metropolitan area. An instrument was utilized to obtain data in order to identify various skills and knowledge. This study was limited to fifteen instruments returned by fifteen participating firms in the Dallas Metropolitan area. A comparison was made of the industrial arts plastics course offerings in the Dallas Metropolitan area schools with the requirements of the plastic industry in order to ascertain the degree of importance the course offerings were to the plastics industry.
Date: August 1973
Creator: Mack, Clarence

A Descriptive Approach to the Development and Implementation of Career Education in the Dallas Independent School System

Description: The problem of this study is to provide a descriptive analysis of research in career-oriented education and a plan of procedure to implement it in the Dallas Independent School District. The first part presents the inception of the career education program, the concept and components of career education, and the scope and goals of career education. The second part division discusses career education precursors and overviews of selected existing programs. The final portion of the study deals with implications of implementation of career education in the Dallas Independent School District.
Date: May 1973
Creator: Kile, Robert Dewayne

A Study of Girls' Involvement in Industrial Arts in Texas

Description: "This study was conducted to find the extent to which girls are involved in industrial arts classes and related activities in Texas public schools, the factors which limit their enrollment, and teachers' opinions concerning industrial arts experiences most beneficial for girls. Data were obtained from bulletins, books, magazines, related studies, and from information forms completed by 123 industrial arts teachers....Among the more important findings were: 1. Girls tend to enroll in certain areas of industrial arts with little or no participation in other areas. 2. A large majority of the respondents indicated they would be receptive to teaching industrial arts to girls. 3. The respondents indicated industrial arts would be of great value to girls. 4. The optimum number of industrial arts credits for girls is one or two. 5. Girls should be taught in mixed classes. 6. The realization of the states objectives of industrial arts is of equal value to boys and girls. 7. Many girls have negative feelings toward becoming involved in industrial arts. 8. Exchange units and unified arts programs are of value to girls and boys." --p. 2
Date: May 1973
Creator: Work, Charles W.

A Study of the Methods Used in the Purchasing, Storing, Budgeting, Accounting, Distributing, and Inventorying of Industrial Arts Woodworking Materials in Selected High Schools in the State of Texas

Description: This study was conducted to determine the methods used in the purchasing, storing, budgeting, accounting, distributing, and inventorying of woodworking materials by industrial arts instructors in secondary schools in the state of Texas.
Date: May 1973
Creator: Gomez, Hervey

Drafting in Texas: A Survey of Course Content as It Related to Teacher Usage of Information Compiled by the Texas Education Agency

Description: This study measures the extent to which the Texas Education Agency's 1963 monograph on drafting, Drafting, Grades 7-12, A Tentative Bulletin, is used in the state's secondary schools and its effects upon classroom activities. Information for the study comes from a questionnaire completed by a random selection of seventy-eight drafting instructors.
Date: December 1972
Creator: Crutchfield, J. Stuart

The Extent to which Texas High School Woodworking Laboratories Comply with Standards of the Texas Occupational Safety Board

Description: The purpose of this study is threefold: (1) to identify and compile recommended safety standards for woodworking laboratories concerning guarding of machines, electrical wiring, fire prevention, flooring materials, and aisles; (2) to identify the standards that pertain to the physical facility and equipment used in industrial arts laboratories and to make them available to teachers and administrators for use in renovation of existing facilities and planning new ones; and (3) to determine the extent to which industrial arts woodworking laboratories in Texas high schools are in compliance with the safety standards set forth by the Texas Occupational Safety Board.
Date: December 1972
Creator: Moss, Joe C.

A Study of the Physical Facilities of Industrial Arts Metalworking Laboratories in the State of Texas

Description: The purposes for conducting this study were to ascertain whether the housing for industrial arts metalworking laboratories was adequate, whether the enrollment of the school showed any correlation with the availability of a metalworking facility, and to what extent the physical facility for metalworking laboratories met current standards.
Date: December 1972
Creator: Teague, Ben W.

A Study of the Knowledge and Skills Required of Draftsmen in Descriptive Geometry, and What is Offered in Texas Junior Colleges

Description: This study was conducted to ascertain whether or not the opportunities for developing competencies in descriptive geometry needed by draftsmen in the Dallas -Fort Worth area are being provided in Texas junior colleges. Findings concerning the knowledge, skills, and equipment associated with descriptive geometry as it is presented in Texas junior colleges were compared with competencies in descriptive geometry that representatives of industry believe are important for successful draftsmen in companies in the Dallas-Fort Worth area. The purpose of the study is to compile information which will be of use to school officials and teachers in developing courses of study that will enable students to acquire the knowledge and skills needed for success in industry.
Date: May 1972
Creator: Ewing, George E.

A Study of the Value of Vocational/Industrial Teacher Preparation for the State Certification at North Texas State University

Description: "The problem with which this study is concerned is that of determining whether the implementation of a teacher-training curriculum providing the courses required for state certification of vocational-technical teachers employed in the North Texas public school systems is feasible and desirable at North Texas State University."--1.
Date: May 1972
Creator: Boyd, Herschel B.

Proposed Guidelines for an Industrial Arts Program for the Mentally Retarded in Public School Systems

Description: The problem was concerned with determining what skills were necessary for the employment of the mentally retarded and what guidelines may be used in developing these skills in the secondary level industrial arts program. The study developed guidelines which should prove useful to an industrial arts instructor having mentally retarded students in his classroom. The guidelines were based upon the results of an industrial survey and available literature.
Date: December 1971
Creator: Page, Ronald T.

A Study of Personal Traits and Professional Qualities of Prospective Industrial Arts Teachers by School Officials and Industrial Arts Teacher Educators

Description: The purposes of this study were (1) to determine what personal traits and professional qualities school officials seek in their duties of employing industrial arts teachers; (2) to determine what personal traits and professional qualities the industrial arts teacher educators believe to be most important for their students to possess upon completion of their formal education; and (3) to determine what type of appraisal form is considered most helpful by school officials and college educators.
Date: August 1971
Creator: Miller, Harvy D.

A Study of the Metalworking Curriculum in Texas High Schools, with Special Reference to the Machine Areas of General Metalworking I and II

Description: The purpose of this study was threefold: (1) to determine what the curriculum offerings were in Texas high schools for General Metalworking I and II during the 1970-71 school year, (2) to determine whether these individual course offerings agreed with the state prescribed curriculum as set forth by the Texas Education Agency, and (3) to determine in what ways the course offerings of the individual schools differed from the state prescribed curriculum.
Date: August 1971
Creator: Henley, Robert P.

A Study of the Nature and Extent of the Guidance and Counseling Function of Industrial Arts Teachers

Description: This study was conducted to find the nature and extent of the guidance and counseling function of selected Texas public school industrial arts teachers, the methods and procedures employed by those teachers in the guidance function, and the opinions of counselors concerning guidance that is being carried out in industrial arts programs.
Date: August 1971
Creator: McLaren, Robert R.

A Study of Industrial Arts Students and Non-industrial Arts Students in Midland High School

Description: The purpose of this study was to compare industrial arts and non-industrial arts students in Midland High School, Midland, Texas. Data were gathered and analyzed to compare industrial arts and non-industrial arts students' chronological ages, family background, I. Q, scores and percentile rankings from intelligence tests, final grade point averages, vocational interests as described by the Kuder Occupational Interest Survey, vocational and educational ambitions, hobby interests, and reasons for election or non-election of industrial arts.
Date: December 1970
Creator: Bragg, John E.

A Study to Develop a Curriculum Guide for Use in Teaching Numerically Controlled Drafting Courses

Description: The problem with which this study is concerned is that of developing a curriculum guide educators can use in planning and organizing a course of study involving computer drafting at the junior college and technical vocational school levels. This study is also concerned with the impact of computer drafting on the present drafting curriculum.
Date: December 1970
Creator: Driskell, Hollis E.