UNT Libraries - 410 Matching Results

Search Results

Kinetic Study of the Reactions of Chlorine Atoms with Fluoromethane and Fluoromethane-d3 in the Gas Phase

Description: The kinetics of the gas-phase reactions of chlorine atoms with fluoromethane (CH3F) and fluoromethane-d3(CD3F) were tested experimentally. The relative rate method was applied by using CH4 as the reference compound for fluoromethane (CH3F) and CH4 and CH3F as the reference compound for fluoromethane-d3(CD3F). The rate constants for H-abstraction from CH3F and D-abstraction from CD3F were measured at room temperature and a total pressure of 920 Torr using Ar as a diluent. The rate constants are described by the expressions: kH= (3.50±0.52) x 10-13 cm3 molecule-1 s-1 and kD=(5.0±0.51) x 10-14 cm3 molecule-1 s-1. The kinetic isotope effect, equal to the ratio kH/kD, was found to be 7.0±1.2 at room temperature.
Date: August 2017
Creator: Shao, Kejun

MBE Growth and Characterization of Graphene on Well-Defined Cobalt Oxide Surfaces: Graphene Spintronics without Spin Injection

Description: The direct growth of graphene by scalable methods on magnetic insulators is important for industrial development of graphene-based spintronic devices, and a route towards substrate-induced spin polarization in graphene without spin injection. X-ray photoelectron spectroscopy (XPS), low energy electron diffraction LEED, electron energy loss spectroscopy (EELS) and Auger electron spectroscopy (AES) demonstrate the growth of Co3O4(111) and CoO(111) to thicknesses greater than 100 Å on Ru(0001) surfaces, by molecular beam epitaxy (MBE). The results obtained show that the formation of the different cobalt oxide phases is O2 partial pressure dependent under same temperature and vacuum conditions and that the films are stoichiometric. Electrical I-V measurement of the Co3O4(111) show characteristic hysteresis indicative of resistive switching and thus suitable for advanced device applications. In addition, the growth of Co0.5Fe0.5O(111) was also achieved by MBE and these films were observed to be OH-stabilized. C MBE yielded azimuthally oriented few layer graphene on the OH-terminated CoO(111), Co0.5Fe0.5O(111) and Co3O4(111). AES confirms the growth of (111)-ordered sp2 C layers. EELS data demonstrate significant graphene-to-oxide charge transfer with Raman spectroscopy showing the formation of a graphene-oxide buffer layer, in excellent agreement with previous theoretical predictions. XPS data show the formation of C-O covalent bonding between the oxide layer and the first monolayer (ML) of C. LEED data reveal that the graphene overlayers on all substrates exhibit C3V. The reduction of graphene symmetry to C3V – correlated with C-O bond formation – enables spin-orbit coupling in graphene. Consequences may include a significant band gap and room temperature spin Hall effect – important for spintronic device applications. The results suggest a general pattern of graphene/graphene oxide growth and symmetry lowering for graphene formation on the (111) surfaces of rocksalt-structured oxides.
Date: August 2017
Creator: Olanipekun, Opeyemi B

Microwave-Assisted Synthesis and Photophysical Properties of Poly-Imine Ambipolar Ligands and Their Rhenium(I) Carbonyl Complexes

Description: The phenomenon luminescence rigidochromism has been reported since the 1970s in tricarbonyldiimine complexes with a general formula [R(CO)3LX] using conventional unipolar diimine ligands such as 2,2;-bipyridine or 1,10-phenanthroline as L, and halogens or simple solvents as X. As a major part of this dissertation, microwave-assisted synthesis, purification, characterization and detailed photoluminescence studies of the complex fac-[ReCl(CO)3L], 1, where L = 4-[4,6-bis(3,5-dimethyl-1H-pyrazol-1-yl]-N,N-diethylbenzenamine are reported. The employment of microwaves in the preparation of 1 decreased the reaction time from 48 to 2 hours compared to the conventional reflux method. Stoichiometry variations allows for selective preparation of either a mononuclear, 1, or binuclear, fac-[Re2Cl2(CO)6], 2, complex. The photophysical properties of 1 were analyzed finding that it possesses significant luminescence rigidochromism. The steady state photoluminescence emission spectra of 1 in solution shift from 550 nm in frozen media to 610 nm when the matrix becomes fluid. Moreover, a very sensitive emission spectral analysis of 0.1 K temperatures steps shows a smooth transition through the glass transition temperature of the solvent host. Furthermore, synthetic modifications to L have attained a family of ambipolar compounds that have tunable photophysical, thermophysical and other material properties that render them promising candidates for potential applications in organic electronics and/or sensors - either as is or for their future complexes with various transition metals and lanthanides.
Access: This item is restricted to UNT Community Members. Login required if off-campus.
Date: August 2017
Creator: Salazar Garza, Gustavo Adolfo

Electrochemical Deposition of Nickel Nanocomposites in Acidic Solution for Increased Corrosion Resistance

Description: The optimal conditions for deposition of nickel coating and Ni-layered double hydroxide metal matrix composite coatings onto stainless steel discs in a modified all-sulfate solutions have been examined. Nickel films provide good general corrosion resistance and mechanical properties as a protective layer on many metallic substrates. In recent years, there has been interest in incorporation nano-dimensional ceramic materials, such as montemorillonite, into the metal matrices to improve upon the corrosion and mechanical properties. Layered double hydroxides have been used as corrosion enhancer in polymer coatings by increasing mechanical strength and lowering the corrosion rate but until now, have not been incorporated in a metal matrix by any means. Layered double hydroxides can be easily synthesized in a variety of elemental compositions and sizes but typically require the use of non-polar solvents to delaminate into nanodimensional colloidal suspensions. The synthesis of a Zn-Al LDH has been studied and characterized. The effects of the non-polar solvents dimethylformamide and n-butanol on the deposition and corrosion resistance of nickel coatings from a borate electrolyte bath have been studied, a nickel-LDH nanocomposite coating has been synthesized by electrochemical deposition and the corrosion resistance has been studied. Results indicate an improvement in corrosion resistance for the coatings with minimal change in the nickel matrix's internal strain and crystallite size.
Access: This item is restricted to UNT Community Members. Login required if off-campus.
Date: August 2017
Creator: Daugherty, Ryan E.

Synthesis and Application of New Chiral Ligands for Enantioselectivity Tuning in Transition Metal Catalysis

Description: A set of five new C3-symmetric phosphites were synthesized and tested in palladium-catalyzed asymmetric Suzuki coupling. The observed reactivity and selectivity were dependent upon several factors. One of the phosphites was able to achieve some of the highest levels of enantioselectivity in asymmetric Suzuki couplings with specific substrates. Different hypotheses have been made for understanding the ligand effects and reaction selectivities, and those hypotheses were tested via various methods including DOSY NMR experiments, X-ray crystallography, and correlation of catalyst selectivity with Tolman cone angles. Although only modest enantioselectivities were observed in most reactions, the ability to synthesis these phosphites in only three steps on gram scales and to readily tune their properties by simple modification of the binaphthyl 2´-substituents makes them promising candidates for determining structure-selectivity relationships in asymmetric transition metal catalysis, in which phosphites have been previously shown to be successful. A series of novel chiral oxazoline-based carbodicarbene ligands was targeted for synthesis. Unfortunately, the chosen synthetic route could not be completed due to unwanted reactivity of the oxazoline ring. However, a new and efficient route for Pd-catalyzed direct amination of aryl halides with oxazoline amine was developed and optimized during these studies. Chiral binaphthyl based Pd(II) ADC complexes with different substituent groups have been synthesized and tested in asymmetric Suzuki coupling reactions. Although only low enantioselectivities were observed in Suzuki coupling, this represents a new class of chiral metal-ADC catalysts that could be tested in further catalytic.
Access: This item is restricted to UNT Community Members. Login required if off-campus.
Date: August 2017
Creator: Kong, Fanji

Design, Synthesis and Optoelectronic Properties of Monovalent Coinage Metal-Based Functional Materials toward Potential Lighting, Display and Energy-Harvesting Devices

Description: Groundbreaking progress in molecule-based optoelectronic devices for lighting, display and energy-harvesting technologies demands highly efficient and easily processable functional materials with tunable properties governed by their molecular/supramolecular structure variations. To date, functional coordination compounds whose function is governed by non-covalent weak forces (e.g., metallophilic, dπ-acid/dπ-base stacking, halogen/halogen and/or d/π interactions) remain limited. This is unlike the situation for metal-free organic semiconductors, as most metal complexes incorporated in optoelectronic devices have their function determined by the properties of the monomeric molecular unit (e.g., Ir(III)-phenylpyridine complexes in organic light-emitting diodes (OLEDs) and Ru(II)-polypyridyl complexes in dye-sensitized solar cells (DSSCs)). This dissertation represents comprehensive results of both experimental and theoretical studies, descriptions of synthetic methods and possible application allied to monovalent coinage metal-based functional materials. The main emphasis is given to the design and synthesis of functional materials with preset material properties such as light-emitting materials, light-harvesting materials and conducting materials. In terms of advances in fundamental scientific phenomena, the major highlight of the work in this dissertation is the discovery of closed-shell polar-covalent metal-metal bonds manifested by ligand-unassisted d10-d10 covalent bonds between Cu(I) and Au(I) coinage metals in the ground electronic state (~2.87 Å; ~45 kcal/mol). Moreover, this dissertation also reports pairwise intermolecular aurophilic interactions of 3.066 Å for an Au(I) complex, representing the shortest ever reported pairwise intermolecular aurophilic distances among all coinage metal(I) cyclic trimetallic complexes to date; crystals of this complex also exhibit gigantic luminescence thermochromism of 10,200 cm-1 (violet to red). From applications prospective, the work herein presents monovalent coinage metal-based functional optoelectronic materials such as heterobimetallic complexes with near-unity photoluminescence quantum yield, metallic or semiconducting integrated donor-acceptor stacks and a new class of Au(III)-based black absorbers with cooperative intermolecular iodophilic (I…I) interactions that sensitize the harvesting of all UV, all visible, and a broad spectrum of near-IR ...
Access: This item is restricted to UNT Community Members. Login required if off-campus.
Date: August 2017
Creator: Ghimire, Mukunda Mani

Application of UV-Vis Spectroscopy to the Monitoring, Characterization and Analysis of Chemical Equilibria of Copper Etching Baths

Description: The continuously increasing demand for innovation in the miniaturization of microelectronics has driven the need for ever more precise fabrication strategies for device packaging, especially for printed circuit boards (PCBs). Subtractive copper etching is a fundamental step in the fabrication process, requiring very precise control of etch rate and etch factor. Changes in the etching chemical equilibrium have significant effects on etching behavior, and CuCl2 / HCl etching baths are typically monitored with several parameters including oxidation-reduction potential, conductivity, and specific gravity. However, the etch rate and etch factor can be difficult to control even under strict engineering controls of those monitoring parameters. The mechanism of acidic cupric chloride etching, regeneration and recovery is complex, and the current monitoring strategies can have difficulty controlling the interlocking chemical equilibria. A complimentary tool, thin-film UV-Vis spectroscopy, can be utilized to improve the current monitoring strategies, as UV-Vis is capable of identifying and predicting etching behavior that the current standard methodologies have difficulty predicting. Furthermore, as a chemically-sensitive probe, UV-Vis can investigate the complex changes to the chemical equilibrium and speciation of the etch bath, and can contribute overall to significant improvements in the control of the copper etching system in order to meet the demands of next-level design strategies.
Access: This item is restricted to UNT Community Members. Login required if off-campus.
Date: August 2017
Creator: Lambert, Alexander S

Elucidation of Photoinduced Energy and Electron Transfer Mechanisms in Multimodular Artificial Photosynthetic Systems

Description: Multimodular designs of electron donor-acceptor systems are the ultimate strategy in fabricating antenna-reaction center mimics for artificial photosynthetic applications. The studied photosystems clearly demonstrated efficient energy transfer from the antenna system to the primary electron donor, and charge stabilization of the radical ion pair achieved with the utilization of secondary electron donors that permits either electron migration or hole transfer. Moreover, the molecular arrangement of the photoactive components also influences the route of energy and electron transfer as observed from the aluminum(III) porphyrin-based photosystems. Furthermore, modulation of the photophysical and electronic properties of these photoactive units were illustrated from the thio-aryl substitution of subphthalocyanines yielding red-shifted Q bands of the said chromophore; hence, regulating the rate of charge separation and recombination in the subphthalocyanine-fullerene conjugates. These multicomponent photosystems has the potential to absorb the entire UV-visible-NIR spectrum of the light energy allowing maximum light-harvesting capability. Furthermore, it permits charge stabilization of the radical ion pair enabling the utilization of the transferred electron/s to be used by water oxidizing and proton reducing catalysts in full-scale artificial photosynthetic apparatuses.
Date: May 2017
Creator: Lim, Gary Lloyd Nogra

Design Considerations and Implementation of Portable Mass Spectrometers for Environmental Applications

Description: Portable mass spectrometers provide a unique opportunity to obtain in situ measurements. This minimizes need for sample collection or in laboratory analysis. Membrane Inlet Mass Spectrometry (MIMS) utilizing a semi permeable membrane for selective rapid introduction for analysis. Polydimethylsiloxane membranes have been proven to be robust in selecting for aromatic chemistries. Advances in front end design have allowed for increased sensitivity, rapid sample analysis, and on line measurements. Applications of the membrane inlet technique have been applied to environmental detection of clandestine drug chemistries and pollutants. Emplacement of a mass spectrometer unit in a vehicle has allowed for large areas to be mapped, obtaining a rapid snapshot of the various concentrations and types of environmental pollutants present. Further refinements and miniaturization have allowed for a backpackable system for analysis in remote harsh environments. Inclusion of atmospheric dispersion modeling has yielded an analytical method of approximating upwind source locations, which has law enforcement, military, and environmental applications. The atmospheric dispersion theories have further been applied to an earth based separation, whereby chemical properties are used to approximate atmospheric mobility, and chemistries are further identified has a portable mass spectrometer is traversed closer to a point source.
Access: This item is restricted to UNT Community Members. Login required if off-campus.
Date: May 2017
Creator: Mach, Phillip Michael

Reductive Functionalization of 3D Metal-Methyl Complexes and Characterization of a Novel Dinitrogen Dicopper (I) Complex

Description: Reductive functionalization of methyl ligands by 3d metal catalysts and two possible side reactions has been studied. Selective oxidation of methane, which is the primary component of natural gas, to methanol (a more easily transportable liquid) using organometallic catalysis, has become more important due to the abundance of domestic natural gas. In this regard, reductive functionalization (RF) of methyl ligands in [M(diimine)2(CH3)(Cl)] (M: VII (d3) through CuII (d9)) complexes, has been studied computationally using density functional techniques. A SN2 mechanism for the nucleophilic attack of hydroxide on the metal-methyl bond, resulting in the formation of methanol, was studied. Similar highly exergonic pathways with very low energy SN2 barriers were observed for the proposed RF mechanism for all complexes studied. To modulate RF pathways closer to thermoneutral for catalytic purposes, a future challenge, paradoxically, requires finding a way to strengthen the metal-methyl bond. Furthermore, DFT calculations suggest that for 3d metals, ligand properties will be of greater importance than metal identity in isolating suitable catalysts for alkane hydroxylation in which reductive functionalization is used to form the C—O bond. Two possible competitive reactions for RF of metal-methyl complexes were studied to understand the factors that lower the selectivity of C—O bond forming reactions. One of them was deprotonation of the methyl group, which leads to formation of a methylene complex and water. The other side reaction was metal-methyl bond dissociation, which was assessed by calculating the bond dissociation free energies of M3d—CH3 bonds. Deprotonation was found to be competitive kinetically for most of the 1st row transition metal-methyl complexes (except for CrII, MnII and CuII), but less favorable thermodynamically as compared to reductive functionalization for all of the studied 1st row transition metal complexes. Metal-carbon bond dissociation was found to be less favorable than the RF reactions for most 3d transition ...
Date: May 2017
Creator: Fallah, Hengameh

Disease Tissue Imaging and Single Cell Analysis with Mass Spectrometry

Description: Cells have been found to have an inherent heterogeneity that has led to an increase in the development of single-cell analysis methods to characterize the extent of heterogeneity that can be found in seemingly identical cells. With an understanding of normal cellular variability, the identification of disease induced cellular changes, known as biomarkers, may become more apparent and readily detectable. Biomarker discovery in single-cells is challenging and needs to focus on molecules that are abundant in cells. Lipids are widely abundant in cells and play active roles in cellular signaling, energy metabolism, and are the main component of cellular membranes. The regulation of lipid metabolism is often disrupted or lost during disease progression, especially in cancer, making them ideal candidates as biomarkers. Challenges exist in the analysis of lipids beyond those of single-cell analysis. Lipid extraction solvents must be compatible with the lipid or lipids of interest. Many lipids are isobaric making mass spectrometry analysis difficult without separations. Single-cell extractions using nanomanipulation coupled to mass spectrometry has shown to be an excellent method for lipid analysis of tissues and cell cultures. Extraction solvents are tunable for specific lipid classes, nanomanipulation prevents damage to neighboring cells, and lipid separations are possible through phase dispersion. The most important aspect of single-cell analysis is that it uncovers the extent of cellular heterogeneity that exists among cellular populations that remains undetected during averaged sampling.
Date: May 2017
Creator: Hamilton, Jason S

Synthesis of Gold Complexes From Diphosphine Ligands and Screening Reactions of Heterocyclic Acetylacetonato (ACAC) Ligands with Transitional Metal Complexes

Description: Syntheses of diphosphine gold (I) complexes from gold THT and two ligands, 4, 5-bis (diphenylphosphino)-4-cyclopenten-1, 3-dione (BPCD) and 2,3-bis(diphenylphosphino)-N-phenylmaleimide (BPPM), were done separately. The reactions happened under ice conditions followed by room temperature conditions and produced two diphosphine gold (I) complexes in moderated yield. Spectroscopic results including nuclear magnetic resonance (NMR) and X-ray crystallography were used to study and determine the structures of the products formed. Moreover, X-rays of all newly synthesized diphosphine gold (I) complexes were compared with the known X-ray structures of other phosphine and diphosphine gold (I) complexes. There were direct resemblances in terms of bond length and angle between these new diphosphine gold (I) complex structures and those already published. For instance, the bond lengths and angles from the newly prepared diphosphine gold (I) complexes were similar to those already published. Where there were some deviations in bond angles and length between the newly synthesized structures and those already published, appropriate explanation was given to explain the deviation. Heterocyclic ligands bearing acetylacetonate (ACAC) side arm(s) were prepared from ethyl malonyl chloride and the heterocyclic compounds 8-hydroxylquinoline, Syn-2-peridoxyaldoxime, quinoxalinol and 2, 6-dipyridinylmethanol. The products (heterocyclic ACAC ligands) from these reactions were screened with transition metal carbonyl compounds in thermolytic reactions. The complexes formed were studied and investigated using NMR and X-ray crystallography. Furthermore, the X-ray structures of the heterocyclic ACAC ligand or ligand A and that of rhenium complex 1 were compared with similar published X-ray structures. The comparison showed there were some similarities in terms of bond length and bond angles.
Date: August 2015
Creator: Nyamwihura, Rogers

Applications of Single Reference Methods to Multi-Reference Problems

Description: Density functional theory is an efficient and useful method of solving single-reference computational chemistry problems, however it struggles with multi-reference systems. Modifications have been developed in order to improve the capabilities of density functional theory. In this work, density functional theory has been successfully applied to solve multi-reference systems with large amounts of non-dynamical correlation by use of modifications. It has also been successfully applied for geometry optimizations for lanthanide trifluorides.
Date: May 2015
Creator: Jeffrey, Chris C.

Computational Studies of C–H/C–C Manipulation Utilizing Transition Metal Complexes

Description: Density Functional Theory (DFT) is an effective tool for studying diverse metal systems. Presented herein are studies of a variety of metal systems, which can be applied to accomplish transformations that are currently difficult/impossible to achieve. The specific topics studied utilizing DFT include: 1) C–H bond activation via an Earth-abundant transition metal complex, 2) C–H bond deprotonation via an alkali metal superbase, 3) and amination/aziridination reactions utilizing a CuI reagent. Using DFT, the transformation to methanol (CH3OH) from methane (CH4) was examined. The transition metal systems studied for this transformation included a model FeII complex. This first-row transition metal is an economical, Earth-abundant metal. The ligand set for this transformation includes a carbonyl ligand in one set of complexes as well as a phosphite ligand in another. The 3d Fe metal shows the ability to convert alkyls/aryls to their oxidized counterpart in an energetically favorable manner. Also, “superbasic” alkali metal amides were investigated to perform C—H bond cleavage. Toluene was the substrate of interest with Cs chosen to be the metal of interest because of the highly electropositive nature of this alkali metal. These highly electrophilic Cs metal systems allow for very favorable C—H bond scission with a toluene substrate. Finally, the amination and aziridination of C–H and C=C bonds, respectively, by a CuI reagent was studied. The mechanism was investigated using DFT calculations. Presently, these mechanisms involving the use of coinage metals are debated. Our DFT simulations shed some insight into how these transformations occur and ultimately how they can be manipulated.
Date: May 2015
Creator: Pardue, Daniel B.

Quantitative Chemical Analysis of the Soils of Erath County, Texas

Description: A chemical analysis of representative samples of Windthorst sand, Denton sand, and Denton clay has been made, and this analysis shows that their composition has a strict correlation with respect to their geological origins. The analyses of the different soils have shown the Windthorst sand to be highly deficient in all of the essential elements, whereas the Denton sand is deficient in only one; namely, phosphorus. The analysis of the Denton clay showed it to be highly fertile. From the consideration of the pH and the lime content, it has been determined to some extent what crops will grow in each of the soils.
Date: June 1938
Creator: Barnes, Benjamin F.

Organomagnesium Compounds in Benzene Solvent and Their Application in Synthesis of Organoberyllium Compounds

Description: The work reported by D. Bryce-Smith and G. F. Cox, along with several recent publications describing experimental results designed to elucidate the long disputed question of the structure of the Grignard reagent in ether stimulated the work reported here, in an effort to obtain additional evidence of the structure of the organomagnesium complex in benzene solvent. Since the primary objective of this work was to prepare organoberyllium compounds using the organomagnesium complexes in hydrocarbon solvents, it seemed an insight into the structure of these complexes would be beneficial in this work. The techniques used and experimental evidence obtained from the structure elucidation of the ethereal Grignard reagent have been most helpful in organization of the methods used to study the structure of organomagnesium halide complexes in benzene solvent. It seemed that an insight into the structure of these organomagnesium halide complexes in hydrocarbon solvents would be beneficial in accomplishing the second objective of this work. This objective was to prepare organoberyllium compounds using the organomagnesium halide complexes prepared in hydrocarbon solvents.
Date: January 1966
Creator: Selman, Charles M.

Chemical Cleavage of Human Phosphoglucose Isomerase at Cysteine

Description: The present study has resulted in the development of a procedure for the specific chemical fragmentation of human phosphoglucose isomerase into a minimal number of peptides. A two-cycle procedure for cleaving the protein with 2-nitro-5- thiocyanobenzoic acid results in four primary peptides and three overlap peptides. The peptides can be readily separated on the basis of their size by using sodium dodecyl sulfate polyacrylamide gel electrophoresis. Preliminary peptide alignments have been considered, and amino acid analyses have been performed. End-terminal analyses of the enzyme revealed a carboxyl terminal sequence of Asp-Val-Gln and a blocked amino terminus. The cysteine cleavage procedure provides an excellent method for the identification and location of specific genetic mutations of human phosphoglucose isomerase.
Date: December 1975
Creator: Conn, Worth R.

Magnetic Properties of Metal(II) Schiff Base Complexes

Description: Ligands prepared from various combinations of aldehydes and ketones with the appropriate aminealcohol were complexed with cupric acetate monohydrate. The complexes with O,NO or N,N,O donor atoms were synthesized to study the influences of the ligand on molecular structure, spin-spin interaction, and on the value of the exchange integral. The magnetic data indicated that of the eight Cu(II) complexes discussed, two behaved differently from known analogous compounds. Cu (benzoylacetone :ethanolamine) was compared to Cu(acac:ethanolamine), and Cu(pyrr:oaminophenol) was compared to Cu(acac:o-aminophenol). Each pair of complexes was postulated to have the same molecular structure. The synthesis and characterization of Mn(pyrr:oaminophenol) 2H2 is also discussed. The following physical data were collected and discussed: elemental analysis, melting point, molecular weight, infrared spectra, electronic spectra, and magnetic susceptibility.
Date: May 1976
Creator: Hines, Mary Katherine

Synthesis and Study of Glutaryl-S-(ω-aminoalkyl)-L-cysteinylglycines as Inhibitors of Glyoxalase I

Description: This thesis describes the synthesis and preliminary enzymatic study of glutaryl-S-(8-aminooctyl)-L-cysteinylglycine and glutaryl-S-(10-aminodecyl)-L-cysteinylglycine as inhibitors of glyoxalase I. These analogs of glutathione were prepared as potential ligands for affinity chromatography purification of glyoxalase I. The compounds were synthesized by a seven-step procedure in overall yields of 24% for the octyl analog and 33% for the decyl analog. Both compounds exhibited mixed type inhibition of the enzyme, with the decyl derivative being more inhibitory than the octyl derivative. The inhibition was nonlinear (parabolic) for both compounds. Although less inhibitory than the corresponding S-substituted glutathione derivatives, these analogs are promising candidates for affinity chromatography ligands. Such compounds may also be useful in studying the mechanism of glyoxalase I.
Date: May 1975
Creator: Phillips, Gerald Wayne

Magnetic Properties of Copper (II) Complexes of Schiff Bases

Description: The synthesis and characterization of two new Schiff base copper(II) complexes are reported. These are Cu(acac: 2-amino-l-phenylethanol) and Cu(acac:2-amino-l-butanol). The ligands, derived from acetylacetone and the appropriate aminoalcohol, are dibasic tridentates with 0,N,O donor atoms. The magnetic properties of the complexes were studied at several temperatures between 78 OK and 296 OK. The magnetic moment of Cu(acac:2-amino-l-phenylethanol) varied little with temperature, and that of Cu(acac:2-amino-lbutanol) increased as the temperature was lowered. This is in contrast to the magnetic moment of Cu(acac:ethanolamine), which decreases as the temperature decreases. Molecular weight data, infrared spectra, magnetic data, electronic spectra, and electron spin resonance spectra of both complexes are reported and discussed.
Date: August 1975
Creator: Jones, William James

Inhibitors of Dihydrofolate Reductase, 8-Oxapteridines

Description: The biological activities of some homeosterically related analogs of dihydrofolic acid have been examined involving pyrimido[4,5-b][l,4]oxazine (8-oxapteridine) derivatives. It is anticipated that these compounds might interfere with the essential intermediary metabolic functions of the vitamin and thus serve as potential chemotherapeutic agents. Preliminary toxicity studies in microbial assay systems were disappointing; however, inhibitory effects were demonstrated in cell free enzyme systems. A comparison of the structure/activity relationships was determined using two folic acid coenzyme systems, dihydrofolate reductase and thymidylate synthetase. The 2-amino-4-hydroxy-6-(substituted)-8-oxapteridines were generally more effective inhibitors than the corresponding 2,4-diamino analogs. The relative biological activity of a series of 2-amino-4-hydroxy-6-ω-phenylalkyl derivatives were examined, and the most active derivative was the 6-phenylethyl analog which appears to function as a mixed-type inhibitor involving partially competitive and partially non-competitive inhibition.
Date: December 1974
Creator: Lin, Shwu-Ching H.

Copper (II) Complexes with Deprotonated N-(2-hydroxyethyl)ethylenediamine

Description: This thesis reports the synthesis and characterization of two new copper(II) halide complexes with deprotonated N-(2-hydroxyethyl)ethylenediamine behaving as a bidentate. The magnetic properties of the new copper(II) complexes were studied from room temperature to liquid nitrogen temperatures. The magnetic data show that both complexes exhibit antiferromagnetic interactions with a singlet ground state and a thermally accessible triplet excited state. Magnetic data and infrared spectra indicate the complexes are halogenbridged. Deprotonation at an amine nitrogen is based on the presence of a hydroxyl stretching band in the infrared spectra. Electronic spectra and infrared spectra indicate the complexes are square planar. Elemental analyses, infrared spectra, electronic spectra, electron spin resonance spectra, and magnetic data are reported and discussed.
Date: December 1975
Creator: Miller, Toney G.

Denaturation, Renaturation and Other Structural Studies on Phosphoglucose Isomerases

Description: Structural properties of phosphoglucose isomerases isolated from a variety of species have been compared by peptide fingerprinting, predicted amino acid sequence homologies and by denaturation and renaturation studies. The enzymes are more readily denatured in guanidinium chloride than in urea, and the isomerase isolated from yeast is more stable toward acid pH than the rabbit muscle enzyme. The rates of guanidinium chloride-induced denaturation are markedly increased by ionic strength and decreased by substrates, competitive inhibitors or glycerol. The enzyme can be renatured, but only in the presence of glycerol. The renaturation process is dependent on protein concentration and temperature and provides a method for the formation of mixed species heterodimers.
Date: December 1975
Creator: Young, Clint D.