UNT Libraries - 12 Matching Results

Search Results

Photoelectric Emission Measurements for CVD Grown Polycrystalline Diamond Films

Description: We examined CVD grown polycrystalline diamond films having different methane concentrations to detect defects and study the possible correlation between the methane concentration used during the growth process and the defect density. SEM and Raman results show that the amorphous and sp2 carbon content of the films increases with methane concentration. Furthermore, photoelectric emission from diamond is confirmed to be a two-photon process, hence the electrons are emitted from normally unoccupied states. We found that the photoelectric yield, for our samples, decreases with the increase in methane concentration. This trend can be accounted for in two different ways: either the types of defects observed in this experiment decrease in density as the methane concentration increases; or, the defect density stays the same or increases, but the increase in methane concentration leads to an increase in the electron affinity, which reduces the overall photoelectric yield.
Date: August 1999
Creator: Hassan, Tarek

Growing carbon nanotubes by chemical vapor deposition technique.

Description: Carbon nanotubes were synthesized in the laboratory using chemical vapor deposition at different methane concentration. I found that a methane concentration of 4 sccm was ideal for well recognizable carbon nanotubes. A higher concentration led to fewer nanotube growth and silicon carbide structure. Coating the sample first with Fe(NO3)3 created a catalyst base on the substrate for the nanotube to adhere and grow on.
Access: This item is restricted to UNT Community Members. Login required if off-campus.
Date: May 2000
Creator: Rajan, Harihar V.

Microwave Cavity Test for Superconductivity

Description: The first part of this paper describes the Meissner effect in superconductors which serves as the most definitive evidence for superconductivity. It is shown that the microwave perturbation technique may be used to demonstrate this effect. By measuring the changes of resonant frequency and inverse quality factor Q of a microwave cavity with a small volume of sample loading, the Meissner effect can be shown by using the Slater perturbation equation. The experimental system is described with details and the basic principle of each component discussed. The second part of this work describes the technique employed to do the actual measurements. The experiments were conducted on samples of Gallium Arsenide (GaAs) and lead zirconate titanate (PZT) to look for the possible high temperature superconductivity properties. Results of these experiments are presented and discussed. Conclusion and suggestions to future exploration are made.
Access: This item is restricted to UNT Community Members. Login required if off-campus.
Date: December 2001
Creator: Tang, Shan

Theoretical Study of Second Harmonic Generation of a Blue Laser at 486 nm Using a BBO Crystal in a Standing Wave Buildup Cavity

Description: For a spectroscopy purpose, we are interested in producing continuous wave (CW) UV laser light at 243 nm with at least 2 mW power. The theory of nonlinear optics suggests that we should be able to produce a desired 2.9 mW of 243 nm light by second harmonic generation (SHG) from a 50 mW blue laser at 486 nm using a BBO crystal in a build up cavity. The most important physical parameters are calculated. A 10 mm Brewster cut BBO crystal can provide phase matching conditions for coupling two ordinary photons at 486 nm and make a secondary beam at 243 nm. The single pass conversion efficiency is calculated not to be enough to generate 2.9 mW of SH light. My investigation shows that a standing wave build up cavity can provide a buildup factor of 94 and an overall conversion efficiency of 5.9% if one use an input coupler mirror with 1.1% transmission at 486 nm.
Date: May 2002
Creator: Khademian, Ali

Approach to Quantum Information starting from Bell's Inequality (Part I) and Statistical Analysis of Time Series Corresponding to Complex Processes (Part II)

Description: I: Quantum information obeys laws that subtly extend those governing classical information, making possible novel effect such as cryptography and quantum computation. Quantum computations are extremely sensitive to disruption by interaction of the computer with its environment, but this problem can be overcome by recently developed quantum versions of classical error-correcting codes and fault-tolerant circuits. Based on these ideas, the purpose of this paper is to provide an approach to quantum information by analyzing and demonstrating Bell's inequality and by discussing the problems related to decoherence and error-correcting. II: The growing need for a better understanding of complex processes has stimulated the development of new and more advanced data analysis techniques. The purpose of this research was to investigate some of the already existing techniques (Hurst's rescaled range and relative dispersion analysis), to develop a software able to process time series with these techniques, and to get familiar with the theory of diffusion processes.
Access: This item is restricted to UNT Community Members. Login required if off-campus.
Date: May 2002
Creator: Failla, Roberto

Application of the Finite Element Method to Some Simple Systems in One and Two Dimensions.

Description: The finite element method (FEM) is reviewed and applied to the one-dimensional eigensystems of the isotropic harmonic oscillator, finite well, infinite well and radial hydrogen atom, and the two-dimensional eigensystems of the isotropic harmonic oscillator and the propagational modes of sound in a rectangular cavity. Computer codes that I developed were introduced and utilized to find accurate results for the FEM eigensolutions. One of the computer codes was modified and applied to the one-dimensional unbound quantum mechanical system of a square barrier potential and also provided accurate results.
Date: May 2002
Creator: Hunnell, Jason C.

Precision measurements of the hyperfine structure in the 23P state of 3He.

Description: The unusually large hyperfine structure splittings in the 23P state of the 3He isotope is measured using electro-optic techniques with high precision laser spectroscopy. Originally designed to probe the fine structure of the 4He atom, this experimental setup along with special modifications I implemented to resolve certain 3He related issues has made possible new high precision hyperfine structure measurements. Discussed are the details of the experimental setup and the modifications, including in depth information necessary to consider while performing these measurements. The results of these hyperfine structure measurements give an order of magnitude improvement in precision over the best previously reported values.
Date: May 2003
Creator: Smiciklas, Marc

Ballistic Deposition: Global Scaling and Local Time Series.

Description: Complexity can emerge from extremely simple rules. A paradigmatic example of this is the model of ballistic deposition (BD), a simple model of sedimentary rock growth. In two separate Problem-in-Lieu-of Thesis studies, BD was investigated numerically in (1+1)-D on a lattice. Both studies are combined in this document. For problem I, the global interface roughening (IR) process was studied in terms of effective scaling exponents for a generalized BD model. The model used incorporates a tunable parameter B to change the cooperation between aggregating particles. Scaling was found to depart increasingly from the predictions of Kardar-Parisi-Zhang theory both with decreasing system sizes and with increasing cooperation. For problem II, the local single column evolution during BD rock growth was studied via statistical analysis of time series. Connections were found between single column time series properties and the global IR process.
Date: December 2003
Creator: Schwettmann, Arne

Maxwell's Equations from Electrostatics and Einstein's Gravitational Field Equation from Newton's Universal Law of Gravitation Using Tensors

Description: Maxwell's equations are obtained from Coulomb's Law using special relativity. For the derivation, tensor analysis is used, charge is assumed to be a conserved scalar, the Lorentz force is assumed to be a pure force, and the principle of superposition is assumed to hold. Einstein's gravitational field equation is obtained from Newton's universal law of gravitation. In order to proceed, the principle of least action for gravity is shown to be equivalent to the maximization of proper time along a geodesic. The conservation of energy and momentum is assumed, which, through the use of the Bianchi identity, results in Einstein's field equation.
Date: May 2004
Creator: Burns, Michael E.

Surface Segregation in Multi-component Systems: Modeling Binary Ni-Al Alloys Using the BFS Method

Description: Although the study of surface segregation has a great technological importance, the work done in the field was for a long time largely restricted to experimental studies and the theoretical work was neglected. However, recent improvements in both first principles and semi-empirical methods are opening a new era for surface scientists. A method developed by Bozzolo, Ferrante, and Smith (BFS) is particularly suitable for complex systems and several aspects of the computational modeling of surfaces and segregation, including alloy surface segregation, structure and composition of alloy surfaces and the formation of surface alloys. In the following work I introduce the BFS method and apply it to model the Ni-Al alloy through a Monte-Carlo simulation. A comparison between my results and those results published by the group mentioned above was my goal. This thesis also includes a detailed explanation of the application of the BFS method to surfaces of multi-component metallic systems, beyond binary alloys.
Date: August 2004
Creator: Kasmi, Azeddine

Brownian Movement and Quantum Computers

Description: This problem in lieu of thesis is a discussion of two topics: Brownian movement and quantum computers. Brownian movement is a physical phenomenon in which the particle velocity is constantly undergoing random fluctuations. Chapters 2, 3 and 4, describe Brownian motion from three different perspectives. The next four chapters are devoted to the subject of quantum computers, which are the signal of a new era of technology and science combined together. In the first chapter I present to a reader the two topics of my problem in lieu of thesis. In the second chapter I explain the idea of Brownian motion, its interpretation as a stochastic process and I find its distribution function. The next chapter illustrates the probabilistic picture of Brownian motion, where the statistical averages over trajectories are related to the probability distribution function. Chapter 4 shows how to derive the Langevin equation, introduced in chapter 1, using a Hamiltonian picture of a bath with infinite number of harmonic oscillators. The chapter 5 explains how the idea of quantum computers was developed and how step-by-step all the puzzles for the field of quantum computers were created. The next chapter, chapter 6, discus the basic quantum unit of information namely, the so called qubit and its properties. Chapter 7 is devoted to quantum logic gates, which are important for conducting logic operation in quantum computers. This chapter explains how they were developed and how they are different from classical ones. Chapter 8 is about the quantum algorithm, Shor's algorithm. Quantum algorithm in quantum computers enables one to solve problems that are hard to solve on digital computers. The last chapter contains conclusions on Brownian movement and the field of quantum computers.
Access: This item is restricted to UNT Community Members. Login required if off-campus.
Date: December 2004
Creator: Habel, Agnieszka

Precision Atomic Spectroscopy with an Integrated Electro- Optic Modulator and DBR Diode Laser at 1083nm

Description: We have explored the use of recently developed high speed integrated electro optic modulators and DBR diode lasers as a tool for precision laser studies of atoms. In particular, we have developed a technique using a high speed modulator as a key element and applied it to the study of the fine structure of the 23P state of atomic helium. This state has been of long standing interest in atomic physics and its study has been the aim of several recent experiments using various precision techniques. We present our method and results, which will describe a new method for determining the fine structure constant, and lead to a precision test of atomic theory.
Access: This item is restricted to UNT Community Members. Login required if off-campus.
Date: December 1999
Creator: Castillega, Jaime