UNT Libraries - Browse

ABOUT BROWSE FEED
Note: All results matching your query require you to be a member of the UNT Community (you must be on campus or login with university credentials for access).

Analysis and Optimization of Graphene FET based Nanoelectronic Integrated Circuits

Description: Like cell to the human body, transistors are the basic building blocks of any electronics circuits. Silicon has been the industries obvious choice for making transistors. Transistors with large size occupy large chip area, consume lots of power and the number of functionalities will be limited due to area constraints. Thus to make the devices smaller, smarter and faster, the transistors are aggressively scaled down in each generation. Moore's law states that the transistors count in any electronic circuits doubles every 18 months. Following this Moore's law, the transistor has already been scaled down to 14 nm. However there are limitations to how much further these transistors can be scaled down. Particularly below 10 nm, these silicon based transistors hit the fundamental limits like loss of gate control, high leakage and various other short channel effects. Thus it is not possible to favor the silicon transistors for future electronics applications. As a result, the research has shifted to new device concepts and device materials alternative to silicon. Carbon is the next abundant element found in the Earth and one of such carbon based nanomaterial is graphene. Graphene when extracted from Graphite, the same material used as the lid in pencil, have a tremendous potential to take future electronics devices to new heights in terms of size, cost and efficiency. Thus after its first experimental discovery of graphene in 2004, graphene has been the leading research area for both academics as well as industries. This dissertation is focused on the analysis and optimization of graphene based circuits for future electronics. The first part of this dissertation considers graphene based transistors for analog/radio frequency (RF) circuits. In this section, a dual gate Graphene Field Effect Transistor (GFET) is considered to build the case study circuits like voltage controlled oscillator (VCO) and low ...
Date: May 2016
Creator: Joshi, Shital

Anchor Nodes Placement for Effective Passive Localization

Description: Wireless sensor networks are composed of sensor nodes, which can monitor an environment and observe events of interest. These networks are applied in various fields including but not limited to environmental, industrial and habitat monitoring. In many applications, the exact location of the sensor nodes is unknown after deployment. Localization is a process used to find sensor node's positional coordinates, which is vital information. The localization is generally assisted by anchor nodes that are also sensor nodes but with known locations. Anchor nodes generally are expensive and need to be optimally placed for effective localization. Passive localization is one of the localization techniques where the sensor nodes silently listen to the global events like thunder sounds, seismic waves, lighting, etc. According to previous studies, the ideal location to place anchor nodes was on the perimeter of the sensor network. This may not be the case in passive localization, since the function of anchor nodes here is different than the anchor nodes used in other localization systems. I do extensive studies on positioning anchor nodes for effective localization. Several simulations are run in dense and sparse networks for proper positioning of anchor nodes. I show that, for effective passive localization, the optimal placement of the anchor nodes is at the center of the network in such a way that no three anchor nodes share linearity. The more the non-linearity, the better the localization. The localization for our network design proves better when I place anchor nodes at right angles.
Date: August 2010
Creator: Pasupathy, Karthikeyan

Automated Defense Against Worm Propagation.

Description: Worms have caused significant destruction over the last few years. Network security elements such as firewalls, IDS, etc have been ineffective against worms. Some worms are so fast that a manual intervention is not possible. This brings in the need for a stronger security architecture which can automatically react to stop worm propagation. The method has to be signature independent so that it can stop new worms. In this thesis, an automated defense system (ADS) is developed to automate defense against worms and contain the worm to a level where manual intervention is possible. This is accomplished with a two level architecture with feedback at each level. The inner loop is based on control system theory and uses the properties of PID (proportional, integral and differential controller). The outer loop works at the network level and stops the worm to reach its spread saturation point. In our lab setup, we verified that with only inner loop active the worm was delayed, and with both loops active we were able to restrict the propagation to 10% of the targeted hosts. One concern for deployment of a worm containment mechanism was degradation of throughput for legitimate traffic. We found that with proper intelligent algorithm we can minimize the degradation to an acceptable level.
Date: December 2005
Creator: Patwardhan, Sudeep

Boosting for Learning From Imbalanced, Multiclass Data Sets

Description: In many real-world applications, it is common to have uneven number of examples among multiple classes. The data imbalance, however, usually complicates the learning process, especially for the minority classes, and results in deteriorated performance. Boosting methods were proposed to handle the imbalance problem. These methods need elongated training time and require diversity among the classifiers of the ensemble to achieve improved performance. Additionally, extending the boosting method to handle multi-class data sets is not straightforward. Examples of applications that suffer from imbalanced multi-class data can be found in face recognition, where tens of classes exist, and in capsule endoscopy, which suffers massive imbalance between the classes. This dissertation introduces RegBoost, a new boosting framework to address the imbalanced, multi-class problems. This method applies a weighted stratified sampling technique and incorporates a regularization term that accommodates multi-class data sets and automatically determines the error bound of each base classifier. The regularization parameter penalizes the classifier when it misclassifies instances that were correctly classified in the previous iteration. The parameter additionally reduces the bias towards majority classes. Experiments are conducted using 12 diverse data sets with moderate to high imbalance ratios. The results demonstrate superior performance of the proposed method compared to several state-of-the-art algorithms for imbalanced, multi-class classification problems. More importantly, the sensitivity improvement of the minority classes using RegBoost is accompanied with the improvement of the overall accuracy for all classes. With unpredictability regularization, a diverse group of classifiers are created and the maximum accuracy improvement reaches above 24%. Using stratified undersampling, RegBoost exhibits the best efficiency. The reduction in computational cost is significant reaching above 50%. As the volume of training data increase, the gain of efficiency with the proposed method becomes more significant.
Date: December 2013
Creator: Abouelenien, Mohamed

Comparison and Evaluation of Existing Analog Circuit Simulator using Sigma-Delta Modulator

Description: In the world of VLSI (very large scale integration) technology, there are many different types of circuit simulators that are used to design and predict the circuit behavior before actual fabrication of the circuit. In this thesis, I compared and evaluated existing circuit simulators by considering standard benchmark circuits. The circuit simulators which I evaluated and explored are Ngspice, Tclspice, Winspice (open source) and Spectre® (commercial). I also tested standard benchmarks using these circuit simulators and compared their outputs. The simulators are evaluated using design metrics in order to quantify their performance and identify efficient circuit simulators. In addition, I designed a sigma-delta modulator and its individual components using the analog behavioral language Verilog-A. Initially, I performed simulations of individual components of the sigma-delta modulator and later of the whole system. Finally, CMOS (complementary metal-oxide semiconductor) transistor-level circuits were designed for the differential amplifier, operational amplifier and comparator of the modulator.
Date: December 2006
Creator: Ale, Anil Kumar

Cuff-less Blood Pressure Measurement Using a Smart Phone

Description: Blood pressure is vital sign information that physicians often need as preliminary data for immediate intervention during emergency situations or for regular monitoring of people with cardiovascular diseases. Despite the availability of portable blood pressure meters in the market, they are not regularly carried by people, creating a need for an ultra-portable measurement platform or device that can be easily carried and used at all times. One such device is the smartphone which, according to comScore survey is used by 26.2% of the US adult population. the mass production of these phones with built-in sensors and high computation power has created numerous possibilities for application development in different domains including biomedical. Motivated by this capability and their extensive usage, this thesis focuses on developing a blood pressure measurement platform on smartphones. Specifically, I developed a blood pressure measurement system on a smart phone using the built-in camera and a customized external microphone. the system consists of first obtaining heart beats using the microphone and finger pulse with the camera, and finally calculating the blood pressure using the recorded data. I developed techniques for finding the best location for obtaining the data, making the system usable by all categories of people. the proposed system resulted in accuracies between 90-100%, when compared to traditional blood pressure meters. the second part of this thesis presents a new system for remote heart beat monitoring using the smart phone. with the proposed system, heart beats can be transferred live by patients and monitored by physicians remotely for diagnosis. the proposed blood pressure measurement and remote monitoring systems will be able to facilitate information acquisition and decision making by the 9-1-1 operators.
Date: May 2012
Creator: Jonnada, Srikanth

Data-Driven Decision-Making Framework for Large-Scale Dynamical Systems under Uncertainty

Description: Managing large-scale dynamical systems (e.g., transportation systems, complex information systems, and power networks, etc.) in real-time is very challenging considering their complicated system dynamics, intricate network interactions, large scale, and especially the existence of various uncertainties. To address this issue, intelligent techniques which can quickly design decision-making strategies that are robust to uncertainties are needed. This dissertation aims to conquer these challenges by exploring a data-driven decision-making framework, which leverages big-data techniques and scalable uncertainty evaluation approaches to quickly solve optimal control problems. In particular, following techniques have been developed along this direction: 1) system modeling approaches to simplify the system analysis and design procedures for multiple applications; 2) effective simulation and analytical based approaches to efficiently evaluate system performance and design control strategies under uncertainty; and 3) big-data techniques that allow some computations of control strategies to be completed offline. These techniques and tools for analysis, design and control contribute to a wide range of applications including air traffic flow management, complex information systems, and airborne networks.
Date: August 2016
Creator: Xie, Junfei

Design and Optimization of Components in a 45nm CMOS Phase Locked Loop

Description: A novel scheme of optimizing the individual components of a phase locked loop (PLL) which is used for stable clock generation and synchronization of signals is considered in this work. Verilog-A is used for the high level system design of the main components of the PLL, followed by the individual component wise optimization. The design of experiments (DOE) approach to optimize the analog, 45nm voltage controlled oscillator (VCO) is presented. Also a mixed signal analysis using the analog and digital Verilog behavior of components is studied. Overall a high level system design of a PLL, a systematic optimization of each of its components, and an analog and mixed signal behavioral design approach have been implemented using cadence custom IC design tools.
Date: December 2006
Creator: Sarivisetti, Gayathri

A Driver, Vehicle and Road Safety System Using Smartphones

Description: As vehicle manufacturers continue to increase their emphasis on safety with advanced driver assistance systems (ADAS), I propose a ubiquitous device that is able to analyze and advise on safety conditions. Mobile smartphones are increasing in popularity among younger generations with an estimated 64% of 25-34 year olds already using one in their daily lives. with over 10 million car accidents reported in the United States each year, car manufacturers have shifted their focus of a passive approach (airbags) to more active by adding features associated with ADAS (lane departure warnings). However, vehicles manufactured with these sensors are not economically priced while older vehicles might only have passive safety features. Given its accessibility and portability, I target a mobile smartphone as a device to compliment ADAS that can bring a driver assist to any vehicle without regards for any on-vehicle communication system requirements. I use the 3-axis accelerometer of multiple Android based smartphone to record and analyze various safety factors which can influence a driver while operating a vehicle. These influences with respect to the driver, vehicle and road are lane change maneuvers, vehicular comfort and road conditions. Each factor could potentially be hazardous to the health of the driver, neighboring public, and automobile and is therefore analyzed thoroughly achieving 85.60% and 89.89% classification accuracy for identifying road anomalies and lane changes, respectively. Effective use of this data can educate a potentially dangerous driver on how to operate a vehicle safely and efficiently. with real time analysis and auditory alerts of these factors, I hope to increase a driver's overall awareness to maximize safety.
Date: May 2012
Creator: Gozick, Brandon

Effects of UE Speed on MIMO Channel Capacity in LTE

Description: With the introduction of 4G LTE, multiple new technologies were introduced. MIMO is one of the important technologies introduced with fourth generation. The main MIMO modes used in LTE are open loop and closed loop spatial multiplexing modes. This thesis develops an algorithm to calculate the threshold values of UE speed and SNR that is required to implement a switching algorithm which can switch between different MIMO modes for a UE based on the speed and channel conditions (CSI). Specifically, this thesis provides the values of UE speed and SNR at which we can get better results by switching between open loop and closed loop MIMO modes and then be scheduled in sub-channels accordingly. Thus, the results can be used effectively to get better channel capacity with less ISI. The main objectives of this thesis are: to determine the type of MIMO mode suitable for a UE with certain speed, to determine the effects of SNR on selection of MIMO modes, and to design and implement a scheduling algorithm to enhance channel capacity.
Date: August 2016
Creator: Shukla, Rahul

Exploration of Visual, Acoustic, and Physiological Modalities to Complement Linguistic Representations for Sentiment Analysis

Description: This research is concerned with the identification of sentiment in multimodal content. This is of particular interest given the increasing presence of subjective multimodal content on the web and other sources, which contains a rich and vast source of people's opinions, feelings, and experiences. Despite the need for tools that can identify opinions in the presence of diverse modalities, most of current methods for sentiment analysis are designed for textual data only, and few attempts have been made to address this problem. The dissertation investigates techniques for augmenting linguistic representations with acoustic, visual, and physiological features. The potential benefits of using these modalities include linguistic disambiguation, visual grounding, and the integration of information about people's internal states. The main goal of this work is to build computational resources and tools that allow sentiment analysis to be applied to multimodal data. This thesis makes three important contributions. First, it shows that modalities such as audio, video, and physiological data can be successfully used to improve existing linguistic representations for sentiment analysis. We present a method that integrates linguistic features with features extracted from these modalities. Features are derived from verbal statements, audiovisual recordings, thermal recordings, and physiological sensors signals. The resulting multimodal sentiment analysis system is shown to significantly outperform the use of language alone. Using this system, we were able to predict the sentiment expressed in video reviews and also the sentiment experienced by viewers while exposed to emotionally loaded content. Second, the thesis provides evidence of the portability of the developed strategies to other affect recognition problems. We provided support for this by studying the deception detection problem. Third, this thesis contributes several multimodal datasets that will enable further research in sentiment and deception detection.
Date: December 2014
Creator: Pérez-Rosas, Verónica

A Language and Visual Interface to Specify Complex Spatial Pattern Mining

Description: The emerging interests in spatial pattern mining leads to the demand for a flexible spatial pattern mining language, on which easy to use and understand visual pattern language could be built. It is worthwhile to define a pattern mining language called LCSPM to allow users to specify complex spatial patterns. I describe a proposed pattern mining language in this paper. A visual interface which allows users to specify the patterns visually is developed. Visual pattern queries are translated into the LCSPM language by a parser and data mining process can be triggered afterwards. The visual language is based on and goes beyond the visual language proposed in literature. I implemented a prototype system based on the open source JUMP framework.
Date: December 2006
Creator: Li, Xiaohui

Learning from small data set for object recognition in mobile platforms.

Description: Did you stand at a door with a bunch of keys and tried to find the right one to unlock the door? Did you hold a flower and wonder the name of it? A need of object recognition could rise anytime and any where in our daily lives. With the development of mobile devices object recognition applications become possible to provide immediate assistance. However, performing complex tasks in even the most advanced mobile platforms still faces great challenges due to the limited computing resources and computing power. In this thesis, we present an object recognition system that resides and executes within a mobile device, which can efficiently extract image features and perform learning and classification. To account for the computing constraint, a novel feature extraction method that minimizes the data size and maintains data consistency is proposed. This system leverages principal component analysis method and is able to update the trained classifier when new examples become available . Our system relieves users from creating a lot of examples and makes it user friendly. The experimental results demonstrate that a learning method trained with a very small number of examples can achieve recognition accuracy above 90% in various acquisition conditions. In addition, the system is able to perform learning efficiently.
Date: May 2016
Creator: Liu, Siyuan

Logic Programming Tools for Dynamic Content Generation and Internet Data Mining

Description: The phenomenal growth of Information Technology requires us to elicit, store and maintain huge volumes of data. Analyzing this data for various purposes is becoming increasingly important. Data mining consists of applying data analysis and discovery algorithms that under acceptable computational efficiency limitations, produce a particular enumeration of patterns over the data. We present two techniques based on using Logic programming tools for data mining. Data mining analyzes data by extracting patterns which describe its structure and discovers co-relations in the form of rules. We distinguish analysis methods as visual and non-visual and present one application of each. We explain that our focus on the field of Logic Programming makes some of the very complex tasks related to Web based data mining and dynamic content generation, simple and easy to implement in a uniform framework.
Date: December 2000
Creator: Gupta, Anima

Memory Management and Garbage Collection Algorithms for Java-Based Prolog

Description: Implementing a Prolog Runtime System in a language like Java which provides its own automatic memory management and safety features such as built--in index checking and array initialization requires a consistent approach to memory management based on a simple ultimate goal: minimizing total memory management time and extra space involved. The total memory management time for Jinni is made up of garbage collection time both for Java and Jinni itself. Extra space is usually requested at Jinni's garbage collection. This goal motivates us to find a simple and practical garbage collection algorithm and implementation for our Prolog engine. In this thesis we survey various algorithms already proposed and offer our own contribution to the study of garbage collection by improvements and optimizations for some classic algorithms. We implemented these algorithms based on the dynamic array algorithm for an all--dynamic Prolog engine (JINNI 2000). The comparisons of our implementations versus the originally proposed algorithm allow us to draw informative conclusions on their theoretical complexity model and their empirical effectiveness.
Date: August 2001
Creator: Zhou, Qinan

Modeling and reduction of gate leakage during behavioral synthesis of nanoscale CMOS circuits.

Description: The major sources of power dissipation in a nanometer CMOS circuit are capacitive switching, short-circuit current, static leakage and gate oxide tunneling. However, with the aggressive scaling of technology the gate oxide direct tunneling current (gate leakage) is emerging as a prominent component of power dissipation. For sub-65 nm CMOS technology where the gate oxide (SiO2) thickness is very low, the direct tunneling current is the major form of tunneling. There are two contribution parts in this thesis: analytical modeling of behavioral level components for direct tunneling current and propagation delay, and the reduction of tunneling current during behavioral synthesis. Gate oxides of multiple thicknesses are useful in reducing the gate leakage dissipation. Analytical models from first principles to calculate the tunneling current and the propagation delay of behavioral level components is presented, which are backed by BSIM4/5 models and SPICE simulations. These components are characterized for 45 nm technology and an algorithm is provided for scheduling of datapath operations such that the overall tunneling current dissipation of a datapath circuit under design is minimal. It is observed that the oxide thickness that is being considered is very low it may not remain constant during the course of fabrication. Hence the algorithm takes process variation into consideration. Extensive experiments are conducted for various behavioral level benchmarks under various constraints and observed significant reductions, as high as 75.3% (with an average of 64.3%).
Date: May 2006
Creator: Velagapudi, Ramakrishna

A Multi-Variate Analysis of SMTP Paths and Relays to Restrict Spam and Phishing Attacks in Emails

Description: The classifier discussed in this thesis considers the path traversed by an email (instead of its content) and reputation of the relays, features inaccessible to spammers. Groups of spammers and individual behaviors of a spammer in a given domain were analyzed to yield association patterns, which were then used to identify similar spammers. Unsolicited and phishing emails were successfully isolated from legitimate emails, using analysis results. Spammers and phishers are also categorized into serial spammers/phishers, recent spammers/phishers, prospective spammers/phishers, and suspects. Legitimate emails and trusted domains are classified into socially close (family members, friends), socially distinct (strangers etc), and opt-outs (resolved false positives and false negatives). Overall this classifier resulted in far less false positives when compared to current filters like SpamAssassin, achieving a 98.65% precision, which is well comparable to the precisions achieved by SPF, DNSRBL blacklists.
Date: December 2006
Creator: Palla, Srikanth

A Netcentric Scientific Research Repository

Description: The Internet and networks in general have become essential tools for disseminating in-formation. Search engines have become the predominant means of finding information on the Web and all other data repositories, including local resources. Domain scientists regularly acquire and analyze images generated by equipment such as microscopes and cameras, resulting in complex image files that need to be managed in a convenient manner. This type of integrated environment has been recently termed a netcentric sci-entific research repository. I developed a number of data manipulation tools that allow researchers to manage their information more effectively in a netcentric environment. The specific contributions are: (1) A unique interface for management of data including files and relational databases. A wrapper for relational databases was developed so that the data can be indexed and searched using traditional search engines. This approach allows data in databases to be searched with the same interface as other data. Fur-thermore, this approach makes it easier for scientists to work with their data if they are not familiar with SQL. (2) A Web services based architecture for integrating analysis op-erations into a repository. This technique allows the system to leverage the large num-ber of existing tools by wrapping them with a Web service and registering the service with the repository. Metadata associated with Web services was enhanced to allow this feature to be included. In addition, an improved binary to text encoding scheme was de-veloped to reduce the size overhead for sending large scientific data files via XML mes-sages used in Web services. (3) Integrated image analysis operations with SQL. This technique allows for images to be stored and managed conveniently in a relational da-tabase. SQL supplemented with map algebra operations is used to select and perform operations on sets of images.
Date: December 2006
Creator: Harrington, Brian

Network Security Tool for a Novice

Description: Network security is a complex field that is handled by security professionals who need certain expertise and experience to configure security systems. With the ever increasing size of the networks, managing them is going to be a daunting task. What kind of solution can be used to generate effective security configurations by both security professionals and nonprofessionals alike? In this thesis, a web tool is developed to simplify the process of configuring security systems by translating direct human language input into meaningful, working security rules. These human language inputs yield the security rules that the individual wants to implement in their network. The human language input can be as simple as, "Block Facebook to my son's PC". This tool will translate these inputs into specific security rules and install the translated rules into security equipment such as virtualized Cisco FWSM network firewall, Netfilter host-based firewall, and Snort Network Intrusion Detection. This tool is implemented and tested in both a traditional network and a cloud environment. One thousand input policies were collected from various users such as staff from UNT departments' and health science, including individuals with network security background as well as students with a non-computer science background to analyze the tool's performance. The tool is tested for its accuracy (91%) in generating a security rule. It is also tested for accuracy of the translated rule (86%) compared to a standard rule written by security professionals. Nevertheless, the network security tool built has shown promise to both experienced and inexperienced people in network security field by simplifying the provisioning process to result in accurate and effective network security rules.
Date: August 2016
Creator: Ganduri, Rajasekhar

New Frameworks for Secure Image Communication in the Internet of Things (IoT)

Description: The continuous expansion of technology, broadband connectivity and the wide range of new devices in the IoT cause serious concerns regarding privacy and security. In addition, in the IoT a key challenge is the storage and management of massive data streams. For example, there is always the demand for acceptable size with the highest quality possible for images to meet the rapidly increasing number of multimedia applications. The effort in this dissertation contributes to the resolution of concerns related to the security and compression functions in image communications in the Internet of Thing (IoT), due to the fast of evolution of IoT. This dissertation proposes frameworks for a secure digital camera in the IoT. The objectives of this dissertation are twofold. On the one hand, the proposed framework architecture offers a double-layer of protection: encryption and watermarking that will address all issues related to security, privacy, and digital rights management (DRM) by applying a hardware architecture of the state-of-the-art image compression technique Better Portable Graphics (BPG), which achieves high compression ratio with small size. On the other hand, the proposed framework of SBPG is integrated with the Digital Camera. Thus, the proposed framework of SBPG integrated with SDC is suitable for high performance imaging in the IoT, such as Intelligent Traffic Surveillance (ITS) and Telemedicine. Due to power consumption, which has become a major concern in any portable application, a low-power design of SBPG is proposed to achieve an energy- efficient SBPG design. As the visual quality of the watermarked and compressed images improves with larger values of PSNR, the results show that the proposed SBPG substantially increases the quality of the watermarked compressed images. Higher value of PSNR also shows how robust the algorithm is to different types of attack. From the results obtained for the energy- efficient SBPG ...
Date: August 2016
Creator: Albalawi, Umar Abdalah S

A New N-way Reconfigurable Data Cache Architecture for Embedded Systems

Description: Performance and power consumption are most important issues while designing embedded systems. Several studies have shown that cache memory consumes about 50% of the total power in these systems. Thus, the architecture of the cache governs both performance and power usage of embedded systems. A new N-way reconfigurable data cache is proposed especially for embedded systems. This thesis explores the issues and design considerations involved in designing a reconfigurable cache. The proposed reconfigurable data cache architecture can be configured as direct-mapped, two-way, or four-way set associative using a mode selector. The module has been designed and simulated in Xilinx ISE 9.1i and ModelSim SE 6.3e using the Verilog hardware description language.
Date: December 2009
Creator: Bani, Ruchi Rastogi

Privacy Preserving EEG-based Authentication Using Perceptual Hashing

Description: The use of electroencephalogram (EEG), an electrophysiological monitoring method for recording the brain activity, for authentication has attracted the interest of researchers for over a decade. In addition to exhibiting qualities of biometric-based authentication, they are revocable, impossible to mimic, and resistant to coercion attacks. However, EEG signals carry a wealth of information about an individual and can reveal private information about the user. This brings significant privacy issues to EEG-based authentication systems as they have access to raw EEG signals. This thesis proposes a privacy-preserving EEG-based authentication system that preserves the privacy of the user by not revealing the raw EEG signals while allowing the system to authenticate the user accurately. In that, perceptual hashing is utilized and instead of raw EEG signals, their perceptually hashed values are used in the authentication process. In addition to describing the authentication process, algorithms to compute the perceptual hash are developed based on two feature extraction techniques. Experimental results show that an authentication system using perceptual hashing can achieve performance comparable to a system that has access to raw EEG signals if enough EEG channels are used in the process. This thesis also presents a security analysis to show that perceptual hashing can prevent information leakage.
Date: December 2016
Creator: Koppikar, Samir Dilip

Procedural content creation and technologies for 3D graphics applications and games.

Description: The recent transformation of consumer graphics (CG) cards into powerful 3D rendering processors is due in large measure to the success of game developers in delivering mass market entertainment software that feature highly immersive and captivating virtual environments. Despite this success, 3D CG application development is becoming increasingly handicapped by the inability of traditional content creation methods to keep up with the demand for content. The term content is used here to refer to any data operated on by application code that is meant for viewing, including 3D models, textures, animation sequences and maps or other data-intensive descriptions of virtual environments. Traditionally, content has been handcrafted by humans. A serious problem facing the interactive graphics software development community is how to increase the rate at which content can be produced to keep up with the increasingly rapid pace at which software for interactive applications can now be developed. Research addressing this problem centers around procedural content creation systems. By moving away from purely human content creation toward systems in which humans play a substantially less time-intensive but no less creative part in the process, procedural content creation opens new doors. From a qualitative standpoint, these types of systems will not rely less on human intervention but rather more since they will depend heavily on direction from a human in order to synthesize the desired content. This research draws heavily from the entertainment software domain but the research is broadly relevant to 3D graphics applications in general.
Date: May 2005
Creator: Roden, Timothy E.

Scene Analysis Using Scale Invariant Feature Extraction and Probabilistic Modeling

Description: Conventional pattern recognition systems have two components: feature analysis and pattern classification. For any object in an image, features could be considered as the major characteristic of the object either for object recognition or object tracking purpose. Features extracted from a training image, can be used to identify the object when attempting to locate the object in a test image containing many other objects. To perform reliable scene analysis, it is important that the features extracted from the training image are detectable even under changes in image scale, noise and illumination. Scale invariant feature has wide applications such as image classification, object recognition and object tracking in the image processing area. In this thesis, color feature and SIFT (scale invariant feature transform) are considered to be scale invariant feature. The classification, recognition and tracking result were evaluated with novel evaluation criterion and compared with some existing methods. I also studied different types of scale invariant feature for the purpose of solving scene analysis problems. I propose probabilistic models as the foundation of analysis scene scenario of images. In order to differential the content of image, I develop novel algorithms for the adaptive combination for multiple features extracted from images. I demonstrate the performance of the developed algorithm on several scene analysis tasks, including object tracking, video stabilization, medical video segmentation and scene classification.
Date: August 2011
Creator: Shen, Yao