UNT Libraries - Browse

1-(4, 4'-Dinitrodiphenylmethyl)-Piperidines; 1-(4-Nitrobenzyl)-and 1-(4-Nitrobenzoyl)-Piperdines
This study experiments with the methods of 1-(4, 4'-Dinitrodiphenylmethyl)-Piperidines; 1-(4-Nitrobenzyl)-and 1-(4-Nitrobenzoyl)-Piperdines.
Ab Initio and Density Functional Investigation of the Conformer Manifold of Melatonin and a Proposal for a Simple Dft-based Diagnostic for Nondynamical Correlation
In this work we address two problems in computational chemistry relevant to biomolecular modeling. In the first project, we consider the conformer space of melatonin as a a representative example of “real-life” flexible biomolecules. Geometries for all 52 unique conformers are optimized using spin-component scaled MP2, and then relative energies are obtained at the CCSD (T) level near the complete basis set limit. These are then used to validate a variety of DFT methods with and without empirical dispersion corrections, as well as some lower-level ab initio methods. Basis set convergence is found to be relatively slow due to internal C-H…O and C-H…N contacts. Absent dispersion corrections, many DFT functionals will transpose the two lowest conformers. Dispersion corrections resolve the problem for most functionals. Double hybrids yield particularly good performance, as does MP2.5. In the second project, we propose a simple DFT-based diagnostic for nondynamical correlation effects. Aλ= (1-TAE [ΧλC]/TAE[XC])/λ where TAE is the total atomization energy, XC the “pure” DFT exchange-correlation functional, and ΧλC the corresponding hybrid with 100λ% HF-type exchange. The diagnostic is a good predictor for sensitivity of energetics to the level of theory, unlike most of the wavefunction-based diagnostics. For GGA functionals, Aλ values approaching unity indicate severe non-dynamical correlation. The diagnostic is only weakly sensitive to the basis set (beyond polarized double zeta) and can be applied to problems beyond practical reach of wavefunction ab-initio methods required for other diagnostics.
Acceptor-sensitizers for Nanostructured Oxide Semiconductor in Excitonic Solar Cells
Organic dyes are examined in photoelectrochemical systems wherein they engage in thermal (rather than photoexcited) electron donation into metal oxide semiconductors. These studies are intended to elucidate fundamental parameters of electron transfer in photoelectrochemical cells. Development of novel methods for the structure/property tuning of electroactive dyes and the preparation of nanostructured semiconductors have also been discovered in the course of the presented work. Acceptor sensitized polymer oxide solar cell devices were assembled and the impact of the acceptor dyes were studied. The optoelectronic tuning of boron-chelated azadipyrromethene dyes has been explored by the substitution of carbon substituents in place of fluoride atoms at boron. Stability of singlet exited state and level of reduction potential of these series of aza-BODIPY coumpounds were studied in order to employ them as electron-accepting sensitizers in solid state dye sensitized solar cells.
Accuracy and Efficiency in Computational Chemistry: The Correlation Consistent Composite Approach
One of the central concerns of computational chemistry is that of efficiency (i.e. the development of methodologies which will yield increased accuracy of prediction without requiring additional computational resources – RAM, disk space, computing time). Though the equations of quantum mechanics are known, the solutions to these equations often require a great deal of computing power. This dissertation primarily concerns the theme of improved computational efficiency (i.e. the achievement of greater accuracy with reduced computational cost). Improvements in the efficiency of computational chemistry are explored first in terms of the correlation consistent composite approach (ccCA). The ccCA methodology was modified and this enhanced ccCA methodology was tested against the diverse G3/05 set of 454 energetic properties. As computational efficiency improves, molecules of increasing size may be studied and this dissertation explored the issues (differential correlation and size extensivity effects) associated with obtaining chemically accurate (within 1 kcal mol-1) enthalpies of formation for hydrocarbon molecules of escalating size. Two applied projects are also described; these projects concerned the theoretical prediction of a novel rare gas compound, FKrOH, and the mechanism of human glutathione synthetase’s (hGS) negative cooperativity. The final work examined the prospect for the parameterization of the modified embedded atom method (MEAM) potential using first principles calculations of dimer and trimer energies of nickel and carbon systems. This method of parameterization holds promise for increasing the accuracy of simulations for bulk properties within the field of materials science.
Accurate and Reliable Prediction of Energetic and Spectroscopic Properties Via Electronic Structure Methods
Computational chemistry has led to the greater understanding of the molecular world, from the interaction of molecules, to the composition of molecular species and materials. Of the families of computational chemistry approaches available, the main families of electronic structure methods that are capable of accurate and/or reliable predictions of energetic, structural, and spectroscopic properties are ab initio methods and density functional theory (DFT). The focus of this dissertation is to improve the accuracy of predictions and computational efficiency (with respect to memory, disk space, and computer processing time) of some computational chemistry methods, which, in turn, can extend the size of molecule that can be addressed, and, for other methods, DFT, in particular, gain greater insight into which DFT methods are more reliable than others. Much, though not all, of the focus of this dissertation is upon transition metal species – species for which much less method development has been targeted or insight about method performance has been well established. The ab initio approach that has been targeted in this work is the correlation consistent composite approach (ccCA), which has proven to be a robust, ab initio computational method for main group and first row transition metal-containing molecules yielding, on average, accurate thermodynamic properties, i.e., within 1 kcal/mol of experiment for main group species and within 3 kcal/mol of experiment for first row transition metal molecules. In order to make ccCA applicable to systems containing any element from the periodic table, development of the method for second row transition metals and heavier elements, including lower p-block (5p and 6p) elements was pursued. The resulting method, the relativistic pseudopotential variant of ccCA (rp-ccCA), and its application are detailed for second row transition metals and lower p-block elements. Because of the computational cost of ab initio methods, DFT is a popular choice ...
Accurate Energetics Across the Periodic Table Via Quantum Chemistry
Greater understanding and accurate predictions of structural, thermochemical, and spectroscopic properties of chemical compounds is critical for the advancements of not only basic science, but also in applications needed for the growth and health of the U.S. economy. This dissertation includes new ab initio composite approaches to predict accurate energetics of lanthanide-containing compounds including relativistic effects, and optimization of parameters for semi-empirical methods for transition metals. Studies of properties and energetics of chemical compounds through various computational methods are also the focus of this research, including the C-O bond cleavage of dimethyl ether by transition metal ions, the study of thermochemical and structural properties of small silicon containing compounds with the Multi-Reference correlation consistent Composite Approach, the development of a composite method for heavy element systems, spectroscopic of compounds containing noble gases and metals (ArxZn and ArxAg+ where x = 1, 2), and the effects due to Basis Set Superposition Error (BSSE) on these van der Waals complexes.
Acetophenone Derivatives; N-Diphenylmethyl and N-Fluorenyl Piperidines
This thesis is a study of α-(4-aminophenylsulfonyl)-acetophenone derivatives; n-diphenylmethyl and n-fluorenyl piperidines.
Addition Reactions of Some Aromatic Aldazines
The paper explores the conclusion that the addition compound was bicyclic, and that the addition of each of the two moles of cyanic acid was dependent upon the other.
Adherence/Diffusion Barrier Layers for Copper Metallization: Amorphous Carbon:Silicon Polymerized Films
Semiconductor circuitry feature miniaturization continues in response to Moore 's Law pushing the limits of aluminum and forcing the transition to Cu due to its lower resistivity and electromigration. Copper diffuses into silicon dioxide under thermal and electrical stresses, requiring the use of barriers to inhibit diffusion, adding to the insulator thickness and delay time, or replacement of SiO2 with new insulator materials that can inhibit diffusion while enabling Cu wetting. This study proposes modified amorphous silicon carbon hydrogen (a-Si:C:H) films as possible diffusion barriers and replacements for SiO2 between metal levels, interlevel dielectric (ILD), or between metal lines (IMD), based upon the diffusion inhibition of previous a-Si:C:H species expected lower dielectric constants, acceptable thermal conductivity. Vinyltrimethylsilane (VTMS) precursor was condensed on a titanium substrate at 90 K and bombarded with electron beams to induce crosslinking and form polymerized a-Si:C:H films. Modifications of the films with hydroxyl and nitrogen was accomplished by dosing the condensed VTMS with water or ammonia before electron bombardment producing a-Si:C:H/OH and a-Si:C:H/N and a-Si:C:H/OH/N polymerized films in expectation of developing films that would inhibit copper diffusion and promote Cu adherence, wetting, on the film surface. X-ray Photoelectron Spectroscopy was used to characterize Cu metallization of these a-Si:C:H films. XPS revealed substantial Cu wetting of a-Si:C:H/OH and a-Si:C:H/OH/N films and some wetting of a-Si:C:H/N films, and similar Cu diffusion inhibition to 800 K by all of the a-:S:C:H films. These findings suggest the possible use of a-Si:C:H films as ILD and IMD materials, with the possibility of further tailoring a-Si:C:H films to meet future device requirements.
Adhesion/Diffusion Barrier Layers for Copper Integration: Carbon-Silicon Polymer Films and Tantalum Substrates
The Semiconductor Industry Association (SIA) has identified the integration of copper (Cu) with low-dielectric-constant (low-k) materials as a critical goal for future interconnect architectures. A fundamental understanding of the chemical interaction of Cu with various substrates, including diffusion barriers and adhesion promoters, is essential to achieve this goal. The objective of this research is to develop novel organic polymers as Cu/low-k interfacial layers and to investigate popular barrier candidates, such as clean and modified tantalum (Ta) substrates. Carbon-silicon (C-Si) polymeric films have been formed by electron beam bombardment or ultraviolet (UV) radiation of molecularly adsorbed vinyl silane precursors on metal substrates under ultra-high vacuum (UHV) conditions. Temperature programmed desorption (TPD) studies show that polymerization is via the vinyl groups, while Auger electron spectroscopy (AES) results show that the polymerized films have compositions similar to the precursors. Films derived from vinyltrimethyl silane (VTMS) are adherent and stable on Ta substrates until 1100 K. Diffusion of deposited Cu overlayers is not observed below 800 K, with dewetting occurred only above 400 K. Hexafluorobenzene moieties can also be incorporated into the growing film with good thermal stability. Studies on the Ta substrates demonstrate that even sub-monolayer coverages of oxygen or carbide on polycrystalline Ta significantly degrade the strength of Cu/Ta chemical interactions, and affect the kinetics of Cu diffusion into bulk Ta. On clean Ta, monolayer coverages of Cu will de-wet only above 600 K. A partial monolayer of adsorbed oxygen (3L O2 at 300 K) results in a lowering of the de-wetting temperature to 500 K, while saturation oxygen coverage (10 L O2, 300 K) results in de-wetting at 300 K. Carbide formation also lowers the de-wetting temperature to 300 K. Diffusion of Cu into the Ta substrate at 1100 K occurs only after a 5-minute induction period. This induction period increases ...
Adsorbate-enhanced Corrosion Processes at Iron and Iron Oxide Surfaces
This study was intended to provide a fuller understanding of the surface chemical processes which result in the corrosion of ferrous materials.
The Adsorption of Radioactive Isotopes on Precipitates
This thesis concerns the investigation of radioisotopes as indicators for precipitation reactions. As a precipitate forms in the presence of a radioisotope, adsorption may take place on its surface. If this adsorption changes markedly at the stoichiometric point it will be possible to use this variation as an indicator for the reaction.
The Adsorption of Radioactive Isotopes on Specific Precipitates
The purpose of this investigation is to reveal the effects of certain factors affecting adsorption on some specific precipitates. It is hoped that the choice of precipitate types will enable extension of the information gained here to other precipitates similar to those investigated.
Advancements in Instrumentation for Fourier Transform Microwave Spectroscopy
The efforts of my research have led to the successful construction of several instruments that have helped expand the field of microwave spectroscopy. The classic Balle-Flygare spectrometer has been modified to include two different sets of antenna to operate in the frequency ranges 6-18 GHz and 18-26 GHz, allowing it to function for a large range without having to break vacuum. This modified FTMW instrument houses two low noise amplifiers in the vacuum chamber to allow for the LNAs to be as close to the antenna as physically possible, improving sensitivity. A new innovative Balle-Flygare type spectrometer, the efficient low frequency FTMW, was conceived and built to operate at frequencies as low as 500 MHz through the use of highly curved mirrors. This is new for FTMW techniques that normally operate at 4 GHz or higher with only a few exceptions around 2 GHz. The chirped pulse FTMW spectrometer uses horn antennas to observe spectra that span 2 GHz versus the standard 1 MHz of a cavity technique. This instrument decreases the amount of time to obtain a large spectral region of relative correct intensity molecular transitions. A Nd:YAG laser ablation apparatus was attached to the classic Balle-Flygare and chirped pulse FTMW spectrometers. This allowed the study of heavy metal containing compounds. The instruments I constructed and the techniques I used have allowed the discovery of further insights into molecular chemistry. I have seen the effects of fluorinating an alkyl halide by determining the geometry of the carbon backbone of trans-1-iodoperfluoropropane and observing a ΔJ = 3 forbidden transition caused by a strong quadrupole coupling constant on this heavy molecule. The quadrupole coupling tensors of butyronitrile, a molecule observed in space, have been improved. The nuclear quadrupole coupling tensor of difluoroiodomethane was added to a list of variably fluorinated methyl ...
Affordances of Instrumentation in General Chemistry Laboratories
The purpose of this study is to find out what students in the first chemistry course at the undergraduate level (general chemistry for science majors) know about the affordances of instrumentation used in the general chemistry laboratory and how their knowledge develops over time. Overall, students see the PASCO™ system as a useful and accurate measuring tool for general chemistry labs. They see the probeware as easy to use, portable, and able to interact with computers. Students find that the PASCO™ probeware system is useful in their general chemistry labs, more advanced chemistry labs, and in other science classes, and can be used in a variety of labs done in general chemistry. Students learn the affordances of the probeware through the lab manual, the laboratory teaching assistant, by trial and error, and from each other. The use of probeware systems provides lab instructors the opportunity to focus on the concepts illustrated by experiments and the opportunity to spend time discussing the results. In order to teach effectively, the instructor must know the correct name of the components involved, how to assemble and disassemble it correctly, how to troubleshoot the software, and must be able to replace broken or missing components quickly. The use of podcasts or Web-based videos should increase student understanding of affordances of the probeware.
Aldohaloketenes and the Stereochemistry of Aldohaloketene Cycloadditions
The objective of this research problem was to synthesize aldohaloketenes and investigate the chemistry of this new class of ketenes.
Aluminum and Copper Chemical Vapor Deposition on Fluoropolymer Dielectrics and Subsequent Interfacial Interactions
This study is an investigation of the chemical vapor deposition (CVD) of aluminum and copper on fluoropolymer surfaces and the subsequent interfacial interactions.
Amine Derivatives of 3-chloro-5(8?)-nitro-1,4-naphthoquinone
This work deals with the preparation of amine derivatives of 3-chloro-5(8?)-nitro-1,4-naphthoquinone which are to be tested for anti-tubercular activity by Parke, Davis and Company.
Amino Acid Complexes of Rhodium(III)
This thesis will explore and study rhodium, a group VIII element that has rarely been studied.
a-Amino Alcohol Derivatives of Methyl P-Nitrophenyl Acetate
This thesis describes the synthesis of a series of dialkylaminoalkoxy derivatives of methyl p-nitrophenylacetate for testing as anti-histamine or hay fever drugs.
Analysis of Acid Gas Emissions in the Combustion of the Binder Enhanced d-RDF by Ion Chromatography
Waste-to-energy has become an attractive alternative to landfills. One concern in this development is the release of pollutants in the combustion process. The binder enhanced d-RDF pellets satisfy the requirements of environmental acceptance, chemical/biological stability, and being storeable. The acid gas emissions of combusting d-RDF pellets with sulfur-rich coal were analyzed by ion chromatography and decreased when d-RDF pellets were utilized. The results imply the possibility of using d-RDF pellets to substitute for sulfur-rich coal as fuel, and also substantiate the effectiveness of a binder, calcium hydroxide, in decreasing emissions of SOx. In order to perform the analysis of the combustion sample, sampling and sample pretreatment methods prior to the IC analysis and the first derivative detection mode in IC are investigated as well. At least two trapping reagents are necessary for collecting acid gases: one for hydrogen halides, and the other for NOx and SOx. Factors affecting the absorption of acid gases are studied, and the strength of an oxidizing agent is the main factor affecting the collection of NOx and SOx. The absorption preference series of acid gases are determined and the absorption models of acid gases in trapping reagents are derived from the analytical results. To prevent the back-flushing of trapping reagents between impingers when leak-checking, a design for the sampling train is suggested, which can be adopted in sample collections. Several reducing agents are studied for pretreating the sample collected in alkali-permanganate media. Besides the recommendation of the hydrogen peroxide solution in EPA method, methanol and formic acid are worth considering as alternate reducing agents in the pretreatment of alkaline-permanganate media prior to IC analysis. The first derivative conductivity detection mode is developed and used in IC system. It is efficient for the detection and quantification of overlapping peaks as well as being applicable for non-overlapping ...
An Analysis of Elementary Science Material Included in Certain Courses of Study and Text Books
The purpose of this study is to assess the contribution of elementary science to the curriculum. The finding of the investigation summarized in table form.
The Analysis of Fire Debris Using Nuclear Magnetic Resonance Spectroscopy
This paper describes a new technique for analyzing fire debris using nuclear magnetic resonance (NMR) spectroscopy. Petroleum distillates, which are commonly used accelerants, were weathered, burned, and steamdistilled. These, as well as virgin samples of the accelerants, were analyzed by gas chromatography and nuclear magnetic resonance spectroscopy. In addition, solvent studies and detectibility limit studies were conducted. The use of NMR is described as a valuable adjunct to the existing methods of analysis.
Analysis of PAH and PCB Emissions from the Combustion of dRDF and the Nondestructive Analysis of Stamp Adhesives
This work includes two unrelated areas of research. The first portion of this work involved combusting densified refuse derived fuel (dRDF) with coal and studying the effect that Ca(0H)2 binder had on reducing polycyclic aromatic hydrocarbon (PAH) and polychlorinated biphenyl (PCB) emissions. The second area of work was directed at developing nondestructive infrared techniques in order to aid in the analysis of postage stamp adhesives. With Americans generating 150-200 million tons a year of Municipal Solid Waste (MSW) and disposing of nearly ninety percent of it in landfills, it is easy to understand why American landfills are approaching capacity. One alternative to landfilling is to process the MSW into RDF. There are technical and environmental problems associated with RDF. This work provides some answers concerning the amount of PAH and PCB emissions generated via the combustion of RDF with coal. It was found that the Ca(OH)2 binder greatly reduced both the PAH and the PCB emissions. In fact, PAH emissions at the ten-percent level were reduced more by using the binder than by the pollution control equipment. If the Ca(0H)2 binder can reduce not only PAH and PCB emissions, but also other noxious emissions, such as acid gases or dioxin, RDF technology could soon be the answer to the current landfill problems. The second portion of this work focused on developing a method to analyze stamp adhesives nondestructively. Using this method, it was fairly easy to differentiate among the three different types of adhesives that have been used by the United States Postal Service: gum arabic, dextrin, and polyvinyl alcohol. Differences caused by changes in chemicals added to the adhesives were also detected. Also, forgeries were detected with as much success, if not more, than by conventional methods. This work also led to the construction of equipment that allows large ...
The Analysis of PCDD and PCDF Emissions from the Cofiring of Densified Refuse Derived Fuel and Coal
The United States leads the world in per capita production of Municipal Solid Waste (MSW), generating approximately 200 million tons per year. By 2000 A.D. the US EPA predicts a 20% rise in these numbers. Currently the major strategies of MSW disposal are (i) landfill and (ii) incineration. The amount of landfill space in the US is on a rapid decline. There are -10,000 landfill sites in the country, of which only 65-70% are still in use. The Office of Technology Assessment (OTA) predicts an 80% landfill closure rate in the next 20 years. The development of a viable energy resource from MSW, in the form of densified Refuse Derived Fuel (dRDF), provides solutions to the problems of MSW generation and fossil fuel depletions. Every 2 tons of MSW yields approximately 1 ton of dRDF. Each ton of dRDF has an energy equivalent of more than two barrels of oil. At current production rates the US is "throwing away" over 200,000,000 barrels of oil a year. In order to be considered a truly viable product dRDF must be extensively studied; in terms of it's cost of production, it's combustion properties, and it's potential for environmental pollution. In 1987 a research team from the University of North Texas, in conjunction with the US DOE and Argonne National Laboratory (ANL), cofired over 550 tons of dRDF and bdRDF with a high sulfur Kentucky coal in a boiler at ANL. This work examines the emission rates of polychlorinated dioxins (PCDDs) and furans (PCDFs) during the combustion of the dRDF, bdRDF, and coal. Even at levels of 50% by Btu content of dRDF in the fuel feedstock, emission rates of PCDDs and PCDFs were below detection limits. The dRDF is shown to be an environmentally acceptable product, which could help resolve one of the ...
An Analysis of the Effectiveness of Computer Assisted Instruction in General Chemistry at an Urban University.
The science-major General Chemistry sequence offered at the University of Houston has been investigated with respect to the effectiveness of recent incorporation of various levels of computer technology. As part of this investigation, questionnaire responses, student evaluations and grade averages and distributions from up to the last ten years have been analyzed and compared. Increased use of web-based material is both popular and effective, particularly with respect to providing extra information and supplemental questions. Instructor contact via e-mail is also well-received. Both uses of technology should be encouraged. In contrast, electronic classroom presentation is less popular. While initial use may lead to improved grades and retention, these levels decrease quickly, possibly due to a reduction in instructor spontaneity.
An Analysis of the Naphtha Cut of Cooke county, Texas, Crude Oil
This study attempted to determine hydrocarbons in the crude oil by comparing the results obtained using the two methods of analysis: chemical analysis and Kurtz-Headington analysis. The Kurtz-Headington analysis was found to be adequate to determine hydrocarbons in the crude oil.
Analysis of Trace Amounts of Adulterants Found in Powders/Supplements Utilizing Direct Inject, Nanomanipulation, and Mass Spectrometry
The regulations of many food products in the United States have been made and followed very well but unfortunately some products are not put under such rigorous standards as others. This leads to products being sold, that are thought to be healthy, but in reality contain unknown ingredients that may be hazardous to the consumers. With the use of several instrumentations and techniques the detection, characterization and identification of these unknown contaminates can be determined. Both the AZ-100 and the TE2000 inverted microscope were used for visual characterizations, image collection and to help guide the extraction. Direct analyte-probed nanoextraction (DAPNe) technique and nanospray ionization mass spectrometry (NSI-MS) was the technique used for examination and identification of all adulterants. A Raman imaging technique was than introduced and has proven to be a rapid, non-destructive and distinctive way to localize a specific adulterant. By compiling these techniques then applying them to the FDA supplied test samples three major adulterants were detected and identified.
The Analysis of Volatile Impurities in Air by Gas Chromatography/Mass Spectrometry
The determination of carbon monoxide is also possible by trapping CO on preconditioned molecular sieve and thermal desorption. Analysis in this case is performed by gas chromatography/mass spectroscopy, although the trapping technique is applicable to other suitable GC techniques.
ANTI Preference of the Pyramidalized Radical Center to the Two Fluorines in Difluoro Cyclic Compounds.
An extensive study of disubstituted cycloalkanes like CnH2n where n=3,4,5 and 6 using DFT((U)B3LYP/6-31G(d) and 6-311+G(2df,2p)) calculations is presented focusing on the effect of pyramidalization of the radical center. A potential energy surface (PES) analysis shows that the radical prefers to pyramidalize anti to the two cis fluorines in the disubstituted cycloalkanes. The degree of pyramidalization for 1,2-difluorocyclopropyl radical is 43.9o away from the cis fluorines whereas for 1,3-difluorocyclobutyl radical, 1,3-difluorocyclopentyl radical and 1,3-difluorocyclohexyl radical is 3.8o, 5.4o and 14.5o respectively away from the cis fluorines. The importance of this pyramidality effect in these compounds is discussed in context with the carbon-hydrogen bond dissociation energies (BDE's) because the preference of the radical centers to pyramidalize anti to the fluorines affects the bond dissociation energy. Importance of steric effect and unfavorable electronic interactions have been extensively explored in planar permethylated cyclobutadiene (Me4CBD) and cyclooctatetraene (Me8COT) using ((U)B3LYP/6-31G(d) and 6-311+G(2df,2p)) calculations. It is thought that steric interactions dominate electronic interactions in Me8COT, while this works opposite in case of Me4CBT. Instead, in Me4CBD the number of unfavorable electronic interactions between π bonds and out-of-plane hydrogens plays the dominant role in determining the relative energies. Interactions between the π bonds of CBD and the out-of-plane hydrogens on carbons attached to the four-membered ring becomes very interesting when the ring size changes. With ethano bridge on the cyclobutadiene ring interaction with the diagonal bonds results in non-bonding AOs across the other diagonal having the opposite phase in the highest occupied (HO)MO. If the HOMO and LUMO are switched, bis-ethano-bridged tetrahedrane is formed. It is suggested that bis-ethano-bridged tetrahedrane is thermodynamically more stable than bis-ethano-bridged cyclobutadienes. While the reverse is true for unsubstituted cyclobutadienes. The ability of ethano bridges to reverse the usual order is because it causes the doubly-bonded carbons to pyramidalize.
Application of Concentration, Adsorption and pH in the Precipitation of the Metal Ions of Groups II and III
In this thesis, the process involved in the precipitations and separations of the metal of Group II and Group III studied. Suggestions have also been offered whereby students can make an analysis without loosing metals in the initial precepitation.
Application of the Correlation Consistent Composite Approach to Biological Systems and Noncovalent Interactions
Advances in computing capabilities have facilitated the application of quantum mechanical methods to increasingly larger and more complex chemical systems, including weakly interacting and biologically relevant species. One such ab initio-based composite methodology, the correlation consistent composite approach (ccCA), has been shown to be reliable for the prediction of enthalpies of formation and reaction energies of main group species in the gas phase to within 1 kcal mol-1, on average, of well-established experiment, without dependence on experimental parameterization or empirical corrections. In this collection of work, ccCA has been utilized to determine the proton affinities of deoxyribonucleosides within an ONIOM framework (ONIOM-ccCA) and to predict accurate enthalpies of formation for organophosphorus compounds. Despite the complexity of these systems, ccCA is shown to result in enthalpies of formation to within ~2 kcal mol-1 of experiment and predict reliable reaction energies for systems with little to no experimental data. New applications for the ccCA method have also been introduced, expanding the utility of ccCA to solvated systems and complexes with significant noncovalent interactions. By incorporating the SMD solvation model into the ccCA formulation, the Solv-ccCA method is able to predict the pKa values of nitrogen systems to within 0.7 pKa unit (less than 1.0 kcal mol-1), overall. A hydrogen bonding constant has also been developed for use with weakly interacting dimers and small cluster compounds, resulting in ccCA interaction energies for water clusters and dimers of the S66 set to within 1.0 kcal mol-1 of well-established theoretical values.
An Application of the Reformatsky Reaction to the Thiophene Series of Compounds
In view of the increasing importance of thiophene derivatives as chemotherapeutic agents, it was considered of interest to apply the Reformatsky reaction to the synthesis of compounds containing the thiophene nucleus with the thought that these might serve as intermediates for further syntheses.
Applications of Nanomanipulation Coupled to Nanospray Mass Spectrometry in Trace Fiber Analysis and Cellular Lipid Analysis.
The novel instrumentation of nanomanipulation coupled to nanospray mass spectrometry and its applications are presented. The nanomanipulator has the resolution of 10nm step sizes allowing for specific fine movement used to probe and characterize objects of interest. Nanospray mass spectrometry only needs a minimum sample volume of 300nl and a minimum sample size of 300attograms to analyze an analyte making it the ideal instrument to couple to nanomanipulation. The nanomanipulator is mounted to an inverted microscope and consists of 4 nano-positioners; these nano-positioners hold end-effectors and other tools used for manipulation. This original coupling has been used to enhance the current abilities of cellular probing and trace fiber analysis. Experiments have been performed to demonstrate the functionality of this instrument and its capabilities. Histidine and caffeine have been sampled directly from single fibers and analyzed. Lipid bodies from cotton seeds have been sampled indirectly and analyzed. The few applications demonstrated are only the beginning of nanomanipulation coupled to nanospray mass spectrometry and the possible applications are numerous especially with the ability to design and fabricate new end-effectors with unique abilities. Future study will be done to further the applications in direct cellular probing including toxicology studies and organelle analysis of single cells. Further studies will be directed in forensic applications of this instrument including gunshot residue sampled from fibers.
Applications of Single Reference Methods to Multi-Reference Problems
Density functional theory is an efficient and useful method of solving single-reference computational chemistry problems, however it struggles with multi-reference systems. Modifications have been developed in order to improve the capabilities of density functional theory. In this work, density functional theory has been successfully applied to solve multi-reference systems with large amounts of non-dynamical correlation by use of modifications. It has also been successfully applied for geometry optimizations for lanthanide trifluorides.
An Approach Towards the Total Synthesis of Clonostachydiol
The syntheses of the unsymmetrical 14-membered bismacrolides have been reviewed. A total synthesis of clonostachydiol, the latest to join this family, has been attempted using trimethylsilyl acetylene as the builiding block and palladium catalyzed reactions for the formation of key bonds. The alkyne groups were introduced by Stille coupling of trimethylstannylethynyltrimethylsilane with an acid chloride for one fragment and by addition of lithiotrimethylsilyl acetylene to an aldehyde for the other. Lactic acid derivatives were chosen as starting materials for both fragments, thus introducing two of the chiral centers. The remaining stereocenters were introduced using stereoselective reductions of ketones.
Aromatic Amino Acid Studies
Pyridine ring analogs of the aromatic amino acids phenylalanine and tyrosine were synthesized and studied in microbiological and mammalian systems.
The Ascorbic Acid Metabolism of Fifty College Women in the North Texas State Teachers College
A study of the ascorbic acid metabolism of a group of fifty college women in the North Texas State Teachers College between the months of April and July, 1943.
Attempted Synthesis of 5-Allyl-5-(2-Thienyl)-Barbituric Acid
This thesis describes attempts to synthesize 5-allyl-5-(2-thienyl)-barbituric acid as an improved anticonvulsant.
Attempted Synthesis of Dibarbituric Acid
This study is an attempted synthesis of dithienyl barbituric acid.
The Attempted Synthesis of some Heterocyclic Sulfones
This thesis describes two experiments: one related to antihistamines, and the other related to antitubercular compounds.
Baeyer-Villiger Oxidation of 1,7- & 1,9-dibromopentacyclo[,6.03,10.05,9]undecane-8,11-dione
Baeyer-Villiger oxidation of 1,9-dibromopentacyclo[,6.03,10.05,9]undecane-8,11-dione (1,9-dibromo-PCU-8,11-dione) was performed by using an excess amount of m-chloroperbenzoic acid (3 equivalents) and resulted in the formation of the corresponding monolactone. The reaction would not proceed to the dilactone stage. The structure of the reaction product was established unequivocally via single crystal X-ray diffraction. Baeyer-Villiger oxidation of 1,9-dibromo-PCU-8,11-dione using ceric ammonium nitrate (CAN) was also performed and afforded a mixture of lactones. Only one of these lactones, which also contained an alkene functionality, could be isolated and characterized. 1,7-dibromo-PCU-8,11-dione was also reacted with CAN, yielding the mono-lactone, which has also been characterized.
Barbituric Acids as Anticonvulsants. IV. 5-Substituted-Mercapto Derivatives of 5-Phenylbarbituric Acids.
This study involves compounds of the barbituric acid series are well known for their use as anesthetics and sedatives.
Barbituric Acids. VI. 5-substituted-mercapto Derivatives of 5-ethylbarbituric Acid
The reaction of 5-bromo-5-ethylbarbituric acid with mercaptan and pyridine in cold ether solution was studied and was found to be satisfactory for the preparation of the compounds reported in this work.
Barbituric Acids. VII. 5-alkyl-derivatives of 5-ethoxy-barbituric Acid
A great deal of research has been devoted in recent years to the search for new drugs for the treatment of epilepsy and related convulsive disorders. This emphasis is occasioned by the fact that no one drug is effective for all patients, and also by the fact that the toxicity of a drug varies considerably from one patient to another. Among the most effective drugs are certain members of the hydantoin and barbituric acid series. For some time there has been in progress in this laboratory an investigation of members of these two series in which a hetro atom attached directly to the hetrocyclic nucleus is introduced into the side chain at position five of these two series.
Barbituric Acids. VIII. 5-substituted-5-(1-pyrrolidyl)barbituric Acids
The purpose of this investigation then was the preparation of a series of 5-substituted-5-(1-pyrrolidyl)barbituric acids in which R would consist of alkyl groups ranging in size from methyl to amyl, and other groups such as phenyl and benzyl. These compounds are to be tested elsewhere for hypnotic and anticonvulsant activity.
Barbituric Acids. V. 5-substituted-mercapto Derivatives of 5-isoamylbarbituric Acid
Since no mention has been found in the literature of any 5-substituted mercapto-5-alkyl derivatives of barbituric acid, it was thought to be of interest to prepare a series of compounds containing sulfur attached directly to the barbituric acid nucleus. 5-substituted mercapto-5-isoamylbarbituric acids were chosen as representative of barbituric acids in which the alkyl group has a fairly high molecular weight.
Base Effects on the Thermal Decomposition of Sec-butyllithium Solutions
The pyrolysis of sec-butyllithium in solution was studied in an attempt to understand the loss of stereo-specificity and the atypical kinetics that have been reported. Additionally, the effect of added lithium alkoxides was studied to determine their effects on the highly reactive sec-butyllithium substrate.
Biological Applications of a Strongly Luminescent Platinum (Ii) Complex in Reactive Oxygen Species Scavenging and Hypoxia Imaging in Caenorhabditis Elegans
Phosphorescent transition metal complexes make up an important group of compounds that continues to attract intense research owing to their intrinsic bioimaging applications that arise from bright emissions, relatively long excited state lifetimes, and large stokes shifts. Now for biomaging assay a model organism is required which must meet certain criteria for practical applications. The organism needs to be small, with a high turn-over of progeny (high fecundity), a short lifecycle, and low maintenance and assay costs. Our model organism C. elegans met all the criteria. The ideal phosphor has low toxicity in the model organism. In this work the strongly phosphorescent platinum (II) pyrophosphito-complex was tested for biological applications as a potential in vivo hypoxia sensor. The suitability of the phosphor was derived from its water solubility, bright phosphorescence at room temperature, and long excited state lifetime (~ 10 µs). The applications branched off to include testing of C. elegans survival when treated with the phosphor, which included lifespan and fecundity assays, toxicity assays including the determination of the LC50, and recovery after paraquat poisoning. Quenching experiments were performed using some well knows oxygen derivatives, and the quenching mechanisms were derived from Stern-Volmer plots. Reaction stoichiometries were derived from Job plots, while percent scavenging (or antioxidant) activities were determined graphically. The high photochemical reactivity of the complex was clearly manifested in these reactions.
Biological Inhibitors
Four isosteric series of plant growth-regulating compounds were prepared. Using an Avena sativa coleptile assay system, derivatives in series I and IV inhibited segment elongation to a greater degree than did comparable derivatives in series II and III.