UNT Scholarly Works - 22 Matching Results

Search Results

Experimental Study of Back Wall Dross and Surface Roughness in Fiber Laser Microcutting of 316L Miniature Tubes

Description: This article uses extensive experimentation to evaluate the effect of fiber laser micro-cutting parameters over average surface roughness and back wall dross in AISI 316L stainless steel mixture tubes.
Date: September 18, 2017
Creator: García-López, Erika; Medrano-Tellez, Alexis G.; Ibarra-Medina, Juansethi R.; Siller, Héctor R. & Rodríguez, Ciro A.
Partner: UNT College of Engineering

Discovery via Integration of Experimentation and Modeling: Three Examples for Titanium Alloys

Description: This article uses case studies to describe three examples of critical experiments that have been conducted in an integrated fashion with modeling activities for titanium alloys, providing valuable information in an accelerated manner.
Date: December 2, 2014
Creator: Liu, Yue; Samimi, P.; Ghamarian, I.; Brice, David. A.; Huber, D. E.; Wang, Zhiqiang et al.
Partner: UNT College of Engineering

Experimental Determination of Residual Stresses Generated by Single Point Incremental Forming of AlSi10Mg Sheets Produced Using SLM Additive Manufacturing Process

Description: This article focuses on investigating the residual stress values associated with a part fabricated by Selective Laser Melting technology (SLM) when this is subjected further to forces on single point incremental forming (SPIF) operation of variable wall angle.
Date: November 13, 2018
Creator: López, Cecilio; Elías-Zúñiga, Alex; Jiménez, Isaac; Martínez-Romero, Oscar; Siller, Héctor R. & Diabb, José
Partner: UNT College of Engineering

Plasma Treated Multi-Walled Carbon Nanotubes (MWCNTs) for Epoxy Nanocomposites

Description: This article describes the depositing of plasma nanocoating of allylamine on the surfaces of multi-walled carbon nanotubes to provide desirable functionalities and thus to tailor the surface characteristics of multi-walled carbon nanotubes for improved dispersion and interfacial adhesion in epoxy matrices.
Date: December 19, 2011
Creator: Ritts, Andrew C.; Yu, Qingsong; Li, Hao; Lombardo, Stephen J.; Han, Xu; Xia, Zhenhai et al.
Partner: UNT College of Engineering

Experimental Determination of Residual Stresses Generated by Single Point Incremental Forming of AlSi10Mg Sheets Produced Using SLM Additive Manufacturing Process

Description: This article assesses the effects of sterilization in materials manufactured using additive manufacturing by employing a sterilization technique used in the food industry.
Date: November 14, 2018
Creator: Robles Linares-Alvelais, José; Figueroa-Cavazos, J. Obedt; Chuck-Hernandez, C.; Siller, Héctor R.; Rodríguez, Ciro A. & Martínez-López, J. Israel
Partner: UNT College of Engineering

Effect of Thermal Treatment With Water, H₂So₄ and Naoh Aqueous Solution on Color, Cell Wall and Chemical Structure of Poplar Wood

Description: This article describes a study to observe and quantify the changes of color on wood surface and microstructure of cell walls after the thermal treatment with water, dilute acid and alkali, and to describe the changes of chemical structure on wood surface after those pretreatments.
Date: March 3, 2018
Creator: Shi, Jiangtao; Lu, Yu; Zhang, Yaoli; Cai, Liping & Shi, Sheldon Q.
Partner: UNT College of Engineering

Scalable Fabrication of Natural-Fiber Reinforced Composites with Electromagnetic Interference Shielding Properties by Incorporating Powdered Activated Carbon

Description: This article discusses preparing Kenaf fiber-polyester composites incorporated with powdered activated carbon (PAC) using the vacuum-assisted resin transfer molding(VARTM) process.
Date: November 17, 2015
Creator: Xia, Changlei; Zhang, Shifeng; Ren, Han; Shi, Sheldon Q.; Zhang, Hualiang; Cai, Liping et al.
Partner: UNT College of Engineering