Search Results

Investigation on drying kinetics analysis of gooseberry slices dried under open sun
Article describes an experimental analysis of the drying behavior of gooseberry slices dried in the open sun. The authors used the hot air dryer method, and found that the moisture content of gooseberry slices in their initial condition was estimated to be 87.81% wet-basis.
A Review of Rehabilitative and Assistive Technologies for Upper-Body Exoskeletal Devices
Authors state that this journal review article focuses on the use of assistive and rehabilitative exoskeletons as a new opportunity for individuals with diminished mobility. Overall, this article serves as a valuable resource for individuals working in the field of assistive and rehabilitative exoskeletons, providing insight into the state of the art and potential areas for improvement.
Fiberboard Made from Scrap Denim: Characterization of its Properties by Effective Bulk Modulus Elastography
Article describes how fiberboards from scrap denim were fabricated using two different resins, melamine urea formaldehyde (MUF) and polymeric methylene diphenyl diisocyanate (pMDI). Resin content and MUF-pMDI weight ratio were studied. Physical and mechanical tests determined the modulus of elasticity (MOE), modulus of rupture (MOR), internal bond (IB), thickness swell (TS), and water absorption (WA).
Optical Property and Stability Study of CH₃(CH₂)₃NH₃)₂(CH₃NH₃)₃Pb₄I₁₃ Ruddlesden Popper 2D Perovskites for Photoabsorbers and Solar Cells and Comparison with 3D MAPbI₃
Article discussing two-dimensional organic halide layered perovskites in the Ruddlesden Popper structure (CH3(CH2)3NH3)2(CH3NH3)n􀀀1PbnI3n+1) layered perovskites in the Ruddlesden Popper structure, represented as BA2MA3Pb4I13 for the n = 4 formulation, for both photoabsorbers in a two-terminal architecture and solar cells. A comparative study of the 3DP and 2DP film stability was also conducted.
Current methods for fabricating 3D cardiac engineered constructs
Article is a review highlighting the various cell types found in cardiac tissues and how they correspond with current advanced fabrication methods for creating cardiac engineered constructs.
Compostable, fully biobased foams using PLA and micro cellulose for zero energy buildings
Article examining foams made from polylactic acid (PLA) and micro cellulose fibrils (MCF) to address the need for bio-resourced foams for the building industry.
Toward Next-Generation Robust Cryptosystems
Accepted Manuscript version of an article that presents thoughts on paradigm-shift next generation cryptosystems to overcome the vulnerabilities of the omnipresent conventional cryptosystems.
PhenoGeneRanker: Gene and Phenotype Prioritization Using Multiplex Heterogeneous Networks
Article
Security and Privacy in Emerging Wireless Networks
Introduction to a special issue of the journal Security and Communication Networks covering security and privacy in emerging wireless networks.
Noble-Metal based Metallic Glasses as Highly Catalytic Materials for Hydrogen Oxidation Reaction in Fuel Cells
Article describes study evaluating the electro-catalytic behavior of recently developed Pt-, Pd-, and Pt/Pd-based metallic glasses using scanning electrochemical microscopy.
Resistant energy analysis of self-pulling process during dropwise condensation on superhydrophobic surfaces
Article describes an energy-based analysis on the formation and growth of condensate droplets on two-tier superhydrophobic surfaces, which are fabricated by decorating carbon nanotubes (CNTs) onto microscale fluorinated pillars.
Biofunctionalization of metallic implants by calcium phosphate coatings
Article provides a brief summary of state-of-art of surface biofunctionalization on implantable metals by CaP coatings.
Research on solving differential equations of forest fire monitor based on Runge-Kutta
Article describes study analyzing the characteristics of the movement of the gel extinguishing agent micelles by considering the resistance of movement.
Stress-Softening and Residual Strain Effects in Suture Materials
This article focuses on the experimental characterization of suture material samples of MonoPlus, Monosyn, polyglycolic acid, polydioxanone 2–0, polydioxanone 4–0, poly(glycolide-co-epsilon-caprolactone), nylon, and polypropylene when subjected to cyclic loading and unloading conditions.
EGFET-Based Sensors for Bioanalytical Applications: A Review
This article provides a review of the state of the art focused on the development of biosensors and chemosensors based on extended-gate field-effect transistor within the field of bioanalytical applications.
Small-Scale Plastic Deformation of Nanocrystalline High Entropy Alloy
This article reports the fabrication of nanocrystalline (NC) Al₀.₁CoCrFeNi high entropy alloy and subsequent small-scale plastic deformation behavior via nano-pillar compression tests.
High-entropy alloy strengthened by in situ formation of entropy-stabilized nano-dispersoids
This article focuses on the effect of introducing Y₂O₃ in the Al₀.₃CoCrFeMnNi high-entropy alloys, fabricated using mechanical alloying and spark plasma sintering.
On the security of the Courtois-Finiasz-Sendrier signature
This article proves that a variant of the Courtois-Finiasz-Sendrier signature is strongly existentially unforgeable under chosen message attack in the random oracle model, assuming hardness of the Permuted Goppa Syndrome Decoding Problem (also known as the Niederreiter problem).
Shaking Table Tests of Low-Rise Shear Walls Made of Recycled Aggregate Concrete
This article investigates the dynamic behavior of shear walls made of recycled aggregate concrete (RAC).
Robust self-cleaning and micromanipulation capabilities of gecko spatulae and their bio-mimics
This article reports a unique self-cleaning mechanism possessed by the nano-pads of gecko spatulae.
Back to Top of Screen