UNT Scholarly Works - 13 Matching Results

Search Results

Results: 1 - 13
open access

Oxidation behavior and microstructural decomposition of Ti-6Al-4V and Ti-6Al-4V-1B sheet

Description: This article conducts a direct comparison between the oxidation behavior of Ti-6Al-4V and Ti-6Al-4V + 1B to elucidate whether the addition of boron to Ti-^Al-4V impacts the oxidation behavior.
Date: August 1, 2016
Creator: Brice, David A.; Samimi, P.; Ghamarian, I.; Liu, Yue; Brice, R. M.; Reidy, Richard F. et al.
Partner: UNT College of Engineering
open access

Effect of Elevated Temperatures on Properties of Blended Cements with Clinoptilolite

Description: Article investigates the effect of elevated temperature on properties of clinoptilolite blended cements. Clinoptilolite was used at 5 %, 10 %, 15 % and 20 % replacement by weight for Portland cement while sand and water quantities were kept constant in all mix designs. The mortars with 5 % or 10 % cliniptilolite substitution have compressive strength exceeding 42.5 MPa after being subjected to 400 °C and 500 °C.
Date: December 1, 2016
Creator: Beycioglu, Ahmet; Yılmaz Aruntaș, Hüseyin; Gencel, Osman; Hagg Lobland, Haley E.; Şamandar, Ayhan & Brostow, Witold, 1934-
Partner: UNT College of Engineering
open access

SSOR Preconditioned Gauss-Seidel Detection and Its Hardware Architecture for 5G and beyond Massive MIMO Networks

Description: This article proposes a novel preconditioned and accelerated Gauss–Siedel algorithm referred to as Symmetric Successive Overrelaxation Preconditioned Gauss-Seidel (SSORGS) to address the signal detection challenges associated with massive MIMO technology.
Date: March 1, 2021
Creator: Chataut, Robin; Akl, Robert G.; Dey, Utpal Kumar & Robaei, Mohammadreza
Partner: UNT College of Engineering
open access

GlobeChain: An Interoperable Blockchain for Global Sharing of Healthcare Data - A COVID-19 Perspective

Description: Article introducing a Blockchain-based medical data-sharing framework (called GlobeChain) to overcome the technical challenges to handle outbreak records. The challenges that might arise due to the proposed Blockchain-based framework are also presented as a future direction that grabs the proposal's effectiveness. This is the accepted manuscript version of the article.
Date: September 1, 2021
Creator: Biswas, Sujit; Li, Fan; Latif, Zohaib; Sharif, Kashif; Bairagi, Anupam K. & Mohanty, Saraju P.
Partner: UNT College of Engineering
open access

Everything You Wanted to Know About Continuous Glucose Monitoring

Description: Article providing a brief review about various approaches of continuous glucose measurement with noninvasive manner. This article covers the state-of-the-art glucose measurement methods and its control mechanism. The study of various consumer products have also been discussed along with the open challenges. This is the Accepted Manuscript version.
Date: November 1, 2021
Creator: Joshi, Amit M. & Mohanty, Saraju P.
Partner: UNT College of Engineering
open access

Preparation of Surface-Modified Nanocellulose from Sugarcane Bagasse by Concurrent Oxalic Acid-Catalyzed Reactions

Description: Article presenting research where concurrent oxalic acid-catalyzed reactions, including cellulose hydrolysis and esterification of the hydrolyzed cellulose, were performed to prepare the nanocellulose from sugarcane bagasse.
Date: September 1, 2020
Creator: Brostow, Witold, 1934-; Sriruangrungkamol, Arisara; Wongjaiyen, Thipsirin & Chonkaew, Wunpen
Partner: UNT College of Engineering
open access

Rapid thermokinetics driven nanoscale vanadium clustering within martensite laths in laser powder bed fused additively manufactured Ti6Al4V

Description: Article reports the computational approach adopted for thermo-diffusion kinetics to rationalize homogenously distributed nanoscale vanadium-rich clusters formed within the martensite laths of Ti6Al4V alloy printed using laser powder bed fusion at an energy density of 52.08J/mm³.
Date: June 1, 2020
Creator: Pantawane, Mangesh V.; Dasari, Sriswaroop; Mantri, Srinivas Aditya; Banerjee, Rajarshi & Dahotre, Narendra B.
Partner: UNT College of Engineering
open access

High-Fidelity Conjugate Heat Transfer Simulation of Micro-Channel Heat Exchanger

Description: Article describes how high-fidelity conjugate heat transfer simulations are used to model a micro-channel heat exchanger (MCHE) in a crossflow to study its thermal-hydraulic performance. Three different microchannel geometries, namely circular, triangular, and square with louver-shaped fins, are considered.
Date: July 1, 2023
Creator: Ahmed, Hossain; Sadat, Hamid & Nasrazadani, Seifollah
Partner: UNT College of Engineering
Back to Top of Screen