UNT Scholarly Works - 54 Matching Results

Search Results

Results: 1 - 24 next
open access

Discovery via Integration of Experimentation and Modeling: Three Examples for Titanium Alloys

Description: This article uses case studies to describe three examples of critical experiments that have been conducted in an integrated fashion with modeling activities for titanium alloys, providing valuable information in an accelerated manner.
Date: December 2, 2014
Creator: Liu, Yue; Samimi, P.; Ghamarian, I.; Brice, David A.; Huber, D. E.; Wang, Zhiqiang et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Deformation induced intermediate metastable lattice structures facilitate ordered B2 nucleation in a fcc-based high entropy alloy

Description: This article reports a novel mixed-mode coupled displacive-diffusional transformation resulting in homogeneously distributed intra-granular B2 precipitates within the fcc matrix.
Date: December 5, 2018
Creator: Choudhuri, Deep; Shukla, Shivakant; Gwalani, Bharat; Banerjee, Rajarshi & Mishra, R. S.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Scalable Fabrication of Natural-Fiber Reinforced Composites with Electromagnetic Interference Shielding Properties by Incorporating Powdered Activated Carbon

Description: This article discusses preparing Kenaf fiber-polyester composites incorporated with powdered activated carbon (PAC) using the vacuum-assisted resin transfer molding(VARTM) process.
Date: December 25, 2015
Creator: Xia, Changlei; Zhang, Shifeng; Ren, Han; Shi, Sheldon Q.; Zhang, Hualiang; Cai, Liping et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Experimental Determination of Residual Stresses Generated by Single Point Incremental Forming of AlSi10Mg Sheets Produced Using SLM Additive Manufacturing Process

Description: This article focuses on investigating the residual stress values associated with a part fabricated by Selective Laser Melting technology (SLM) when this is subjected further to forces on single point incremental forming (SPIF) operation of variable wall angle.
Date: December 13, 2018
Creator: López, Cecilio; Elías-Zúñiga, Alex; Jiménez, Isaac; Martínez-Romero, Oscar; Siller Carrillo, Héctor Rafael & Diabb, José
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Experimental Study of Back Wall Dross and Surface Roughness in Fiber Laser Microcutting of 316L Miniature Tubes

Description: This article uses extensive experimentation to evaluate the effect of fiber laser micro-cutting parameters over average surface roughness and back wall dross in AISI 316L stainless steel mixture tubes.
Date: December 26, 2017
Creator: García-López, Erika; Medrano-Tellez, Alexis G.; Ibarra-Medina, Juansethi R.; Siller Carrillo, Héctor Rafael & Rodríguez, Ciro A.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Effect of Elevated Temperatures on Properties of Blended Cements with Clinoptilolite

Description: Article investigates the effect of elevated temperature on properties of clinoptilolite blended cements. Clinoptilolite was used at 5 %, 10 %, 15 % and 20 % replacement by weight for Portland cement while sand and water quantities were kept constant in all mix designs. The mortars with 5 % or 10 % cliniptilolite substitution have compressive strength exceeding 42.5 MPa after being subjected to 400 °C and 500 °C.
Date: December 1, 2016
Creator: Beycioglu, Ahmet; Yılmaz Aruntaș, Hüseyin; Gencel, Osman; Hagg Lobland, Haley E.; Şamandar, Ayhan & Brostow, Witold, 1934-
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Hydrostatic High-Pressure Post-Processing of Specimens Fabricated by DLP, SLA, and FDM: An Alternative for the Sterilization of Polymer-Based Biomedical Devices

Description: This article assesses the effects of sterilization in materials manufactured using additive manufacturing by employing a sterilization technique used in the food industry.
Date: December 13, 2018
Creator: Robles Linares-Alvelais, José; Figueroa-Cavazos, J. Obedt; Chuck-Hernandez, C.; Siller Carrillo, Héctor Rafael; Rodríguez, Ciro A. & Martínez-López, J. Israel
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Effects of gradient distribution and aggregate structure of fibers on the flexibility and flexural toughness of natural moso bamboo (Phyllostachys edulis)

Description: Article is a study proposing an original method to quantitatively evaluate the gradient distribution and aggregate structure of fibers on the flexibility and flexural toughness of natural moso (Phyllostachys edulis) bamboo, with a comparison to two other natural woods.
Date: December 24, 2021
Creator: Wei, Xin; Wang, Ge; Smith, Lee M.; Chen, Xiaoyi & Jiang, Huan
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Sc3N@C80 and La@C82 doped graphene for a new class of optoelectronic devices

Description: This is the Author Manuscript version of an article presenting high-performance hybrid graphene photodetectors prepared with endohedral fullerenes deposited on graphene using electrophoretic methods for the first time.
Date: December 19, 2019
Creator: Jayanand, Kishan; Min, Misook; Chugh, Srishti; Kaul, Anupama; Adhikari, Nirmal & Echegoyen, Luis
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Self-Assembly Techniques for Nanofabrication

Description: Article introduces a special issue of the Journal of Nanomaterials that addresses the research studies on fabrication, processing, and applications of self-assembled nanostructures.
Date: December 24, 2013
Creator: Kajbafvala, Amir; Bahmanpour, Hamed; Maneshian, Mohammad H. & Li, Minghang
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Computational Fluid Dynamics, potential flow and system-based simulations of fully appended free running 5415M in calm water and waves

Description: Article assesses the capabilities of computational fluid dynamics (CFD), potential flow (PF), and system-based (SB) methods for course keeping in calm water and regular and bi-chromatic waves for 5415M as a benchmark test case for AVT-161.
Date: December 27, 2018
Creator: Toxopeus, Serge; Sadat Hosseini, Seyed Hamid; Visonneau, Michel; Guilmineau, Emmanuel; Yen, Tin-Guen; Lin, Woei-Min et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Plasma Treated Multi-Walled Carbon Nanotubes (MWCNTs) for Epoxy Nanocomposites

Description: This article describes the depositing of plasma nanocoating of allylamine on the surfaces of multi-walled carbon nanotubes to provide desirable functionalities and thus to tailor the surface characteristics of multi-walled carbon nanotubes for improved dispersion and interfacial adhesion in epoxy matrices.
Date: December 19, 2011
Creator: Ritts, Andrew C.; Yu, Qingsong; Li, Hao; Lombardo, Stephen J.; Han, Xu; Xia, Zhenhai et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

A Performance Study of Some Approximation Algorithms for Computing a Small Dominating Set in a Graph

Description: Article implements and tests the performances of several approximation algorithms for computing the minimum dominating set of a graph. This article belongs to the Special Issue: Algorithms for Hard Graph Problems.
Date: December 14, 2020
Creator: Shahrokhi, Farhad; Li, Jonathan & Potru, Rohan
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
Back to Top of Screen