UNT Scholarly Works - 21 Matching Results

Search Results

Results: 1 - 21
open access

Achieving extraordinary structural efficiency in a wrought magnesium rare earth alloy

Description: Article describes development of an ultrafine-grained magnesium alloy with an extraordinary strength and ductility combination, exceptional high specific strength, zero yield strength asymmetry and excellent high strain rate superplasticity.
Date: January 29, 2020
Creator: Panigrahi, S. K.; Mishra, Rajiv; Brennan, R.C. & Cho, K. C.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Co-introduction of precipitate hardening and TRIP in a TWIP high-entropy alloy using friction stir alloying

Description: Article exploring friction stir alloying (FSA) to tune the microstructure and a composition of a TWIP high-entropy alloy by adding Ti, and thus activating site-specific deformation mechanisms that occur concomitantly in a single alloy. This approach presents a novel microstructural architecture to design alloys, an approach that combines and optimizes local compositions such that multiple deformation mechanisms can be activated to enhance engineering properties.
Date: January 15, 2021
Creator: Wang, Tianhao; Shukla, Shivakant; Gwalani, Bharat; Sinha, S.; Thapliyal, Saket; Frank, Michael et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Crystallographic texture dependent bulk anisotropic elastic response of additively manufactured Ti6Al4V

Description: This article identifies a bulk texture effect on elastic anisotropy in laser powder bed fused Ti6Al4V by employing an effective bulk modulus elastography technique coupled with ultrasound shear wave velocity measurement at a frequency of 20 MHz inside the material.
Date: January 12, 2021
Creator: Pantawane, Mangesh V.; Yang, Teng; Jin, Yuqi; Joshi, Sameehan; Dasari, Sriswaroop; Sharma, Abhishek et al.
Item Type: Refine your search to only Article
Partner: University of North Texas
open access

Crystallographically degenerate B2 precipitation in a plastically deformed fcc-based complex concentrated alloy

Description: Article describes the development of bcc-ordered B2 and fcc phases manifested in three different orientation relationships (ORs) in the same microstructure: Kurdjumov–Sachs, Nishiyama–Wasserman and Pitsch.
Date: January 22, 2018
Creator: Choudhuri, Deep; Shukla, Shivakant; Green, Whitley; Gwalani, Bharat; Ageh, Victor; Banerjee, Rajarshi et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Effect of Polymer Removal on the Morphology and Phase of the Nanoparticles in All-Inorganic Heterostructures Synthesized via Two-Step Polymer Infiltration

Description: This article uses iron oxide/alumina heterostructures formed by two-step infiltration of polystyrene-block-polyvinyl pyridine block copolymer with iron and aluminum precursors from the solution and vapor-phases, respectively, to show that the phase and morphology of iron oxide nanoparticles dramatically depend on the approach used to remove the polymer. The article extends the boundaries of structure manipulations in multicomponent heterostructures synthesized using polymer infiltration synthes… more
Date: January 28, 2021
Creator: Berman, Diana; Sha, Yuchen & Shevchenko, Elena V.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Electrochemical and Friction Characteristics of Metallic Glass Composites at the Microstructural Length-scales

Description: This article evaluates the phase-specific electrochemical and friction characteristics of a Zr-based mtallic glass composite, which comprised roughly of 40% by volume crystalline dendrites in an amorphous matrix.
Date: January 17, 2018
Creator: Ayyagari, Aditya; Hasannaeimi, Vahid; Singh Arora, Harpreet & Mukherjee, Sundeep
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Friction stir-based additive manufacturing

Description: This article is a review of friction stir additive manufacturing (FSAM) and additive friction stir deposition (AFSD) and provides a systems approach framework and a conceptual process model to guide researchers.
Date: January 18, 2022
Creator: Mishra, Rajiv; Haridas, Ravi Sankar & Agrawal, Priyanshi
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Hydrogen bonding interactions of H2O and SiOH on a boroaluminosilicate glass corroded in aqueous solution

Description: This article simulates hydrous species (H2O and Si-OH) on nano-porous alteration layers (gels) formed on a boroaluminosilicate glass called International Simple Glass corroded in aqueous solutions at pH 7 and pH 9, and initially saturated with soluble silicon-containing species were analyzed using linear and non-linear vibrational spectroscopy in combination with molecular dynamics simulations. The simulation and experimental results obtained in this study indicate that the water mobility in th… more
Date: January 7, 2020
Creator: Ngo, Dien; Liu, Hongshen; Chen, Zhe; Huseyin, Kaya; Zimudzi, Tawanda J.; Gin, Stéphane et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Interfacial Structures and Energetics of the Strengthening Precipitate Phase in Creep-Resistant Mg-Nd-Based Alloys

Description: This article discusses the study of two interfaces– {112}β1/{1100}Mg and {111}β1/{1120}Mg– that are commensurate with β1/hcp-Mg orientation relationship via first principles calculations.
Date: January 17, 2017
Creator: Choudhuri, Deep; Banerjee, Rajarshi & Srivilliputhur, Srinivasan
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Microstructure and surface texture driven improvement in in-vitro response of laser surface processed AZ31B magnesium alloy

Description: This article explores the effects of laser surface melting on microstructure and surface topography evolution in AZ31B magnesium alloy.
Date: January 19, 2021
Creator: Wu, Tso-Chang; Joshi, Sameehan; Ho, Yee-Hsien; Pantawane, Mangesh V.; Sinha, Subhasis & Dahotre, Narendra B.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Ordering-mediated local nano-clustering results in unusually large Hall-Petch strengthening coefficients in high entropy alloys

Description: This article reports a dramatic increase in the grain boundary strengthening or Hall-Petch coefficient, K, by systematically investigating the effect of Al addition on tensile yield strength in CoFeNi and CoCrFeNi high entropy alloys (HEAs) or complex concentrated alloys (CCAs). Such a trend is attributed to the ordering mediated nano-clustering in Al containing HEA/CCAs.
Date: January 23, 2021
Creator: Jagetia, Abhinav; Nartu, M. S. K. K. Y.; Dasari, S.; Sharma, A.; Gwalani, Bharat & Banerjee, Rajarshi
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Planar shock compression of spark plasma sintered B4C and B4C-TiB2 ceramic composites

Description: Article describes how blending of ceramic constituent phases enhances sinterability and performance in high strength ceramics. The authors describe how a near fully dense blended boron carbide (B4C)-titanium diboride (TiB2) composite produced through spark plasma sintering (SPS) is probed to understand the mechanical performance under dynamic uniaxial strain, or shock compression.
Date: January 24, 2024
Creator: Turnage, Scott A.; Clayton, John D.; Rodriguez, Jonathan; Scharf, Thomas W. & Williams, Cyril L.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Quantitative estimation of closed cell porosity in low density ceramic composites using X-ray microtomography

Description: Article asserts that x-ray Microtomography is a proven tool for phase fraction analysis of multi-phase systems, provided that each phase is adequately partitioned by some means of data processing. The authors present a novel, combined methodology for accurate porosity analysis—despite these shortcomings.
Date: January 4, 2023
Creator: Smith, J. D.; Garcia, C.; Rodriguez, J. & Scharf, T. W.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Role of heterophase interfaces on local coercivity mechanisms in the magnetic Al0.3CoFeNi complex concentrated alloy

Description: Article describes how authors use state-of-the-art electron microscopy techniques to show that the magnetization reversal process in an Al0.3CoFeNi magnetic complex concentrated alloy (CCA), which is responsible for its coercivity, changes dramatically from a nucleation-type mechanism in the FCC+L12 state of the CCA. Their work reveals that heterophase FCC/BCC interfaces have a much stronger effect on coercivity than isostructural chemically ordered/disordered interfaces and provides a powerful… more
Date: January 10, 2023
Creator: Kovács, András; Venkataraman, Nithin B.; Chaudhary, V.; Dasari, Sriswaroop; Denneulin, Thibaud; Ramanujan, R. V. et al.
Item Type: Refine your search to only Article
Partner: UNT College of Science
open access

Ultra-high Photoresponsivity in Suspended Metal-Semiconductor-Metal Mesoscopic Multilayer MoS₂ Broadband Detector from UV-to-IR with Low Schottky Barrier Contacts

Description: This article describes the performance of a multifaceted investigation comprising of atomic force microscopy (AFM0, photoluminescence (PL) and Raman spectroscopy to analyze the structural and chemical characteristics to help shed insights on the origins of the superior optoelectronic device performance.
Date: January 19, 2018
Creator: Saenz, Gustavo A.; Karapetrov, Goran; Curtis, James & Kaul, Anupama
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Unveiling the interplay of deformation mechanisms in a metastable high entropy alloy with tuned composition using synchrotron X-ray diffraction

Description: Article investigating the mechanical behavior of a metastable high entropy alloy (HEA) with composition Fe39-Mn20-Co20-Cr15-Si5-1Al (at%).
Date: January 15, 2022
Creator: Polatidis, E.; Shukla, S.; Čapek, J.; Van Petegem, S.; Casati, N. & Mishra, R. S.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
Back to Top of Screen