UNT Theses and Dissertations - 369 Matching Results

Search Results

Base Effects on the Thermal Decomposition of Sec-butyllithium Solutions

Description: The pyrolysis of sec-butyllithium in solution was studied in an attempt to understand the loss of stereo-specificity and the atypical kinetics that have been reported. Additionally, the effect of added lithium alkoxides was studied to determine their effects on the highly reactive sec-butyllithium substrate.
Date: June 1966
Creator: Adams, George Michael
Partner: UNT Libraries

Determination of Molecular Descriptors for Illegal Drugs by Gc-fid Using Abraham Solvation Model

Description: The Abraham solvation parameter model is a good approach for analyzing and predicting biological activities and partitioning coefficients. The general solvation equation has been used to predict the solute property (SP) behavior of drug compounds between biological barriers. Gas chromatography (GC) retention time can be used to predict molecular descriptors, such as E, S, A, B & L for existing and newly developed drug compounds. In this research, six columns of different stationary phases were used to predict the Abraham molecular descriptors more accurately. The six stationary phases used were 5% phenylmethyl polysiloxane, 6% cyanopropylphenyl 94% dimethylpolysiloxane, 5% diphenyl 95% dimethylpolysiloxane, 100% dimethylpolysiloxane, polyethylene glycol and 35% diphenyl 65% dimethylpolysiloxane. Retention times (RT) of 75 compounds have been measured and logarithm of experimental average retention time Ln(RTexp) are calculated. The Abraham solvation model is then applied to predict the process coefficients of these compounds using the literature values of the molecular descriptors (Acree Compilation descriptors). Six correlation equations are built up as a training set for each of the six columns. The six equations are then used to predict the molecular descriptors of the illegal drugs as a test set. This work shows the ability to extract molecular information from a new compound by utilizing commonly used GC columns available with the desired stationary phases. One can simply run the new compound in GC using these columns to get the retention time. Plugging in the retention time into the developed equations for each of the column will predict the molecular descriptors for the test compound and will give some information about the properties of the compound.
Date: December 2013
Creator: Akhter, Syeda Sabrina
Partner: UNT Libraries

Baeyer-Villiger Oxidation of 1,7- & 1,9-dibromopentacyclo[,6.03,10.05,9]undecane-8,11-dione

Description: Baeyer-Villiger oxidation of 1,9-dibromopentacyclo[,6.03,10.05,9]undecane-8,11-dione (1,9-dibromo-PCU-8,11-dione) was performed by using an excess amount of m-chloroperbenzoic acid (3 equivalents) and resulted in the formation of the corresponding monolactone. The reaction would not proceed to the dilactone stage. The structure of the reaction product was established unequivocally via single crystal X-ray diffraction. Baeyer-Villiger oxidation of 1,9-dibromo-PCU-8,11-dione using ceric ammonium nitrate (CAN) was also performed and afforded a mixture of lactones. Only one of these lactones, which also contained an alkene functionality, could be isolated and characterized. 1,7-dibromo-PCU-8,11-dione was also reacted with CAN, yielding the mono-lactone, which has also been characterized.
Access: This item is restricted to UNT Community Members. Login required if off-campus.
Date: May 2004
Creator: Akinola, Adeniyi O.
Partner: UNT Libraries

Synthesis, characterization and properties of rigid macromolecules with extended conjugation, using palladium-catalyzed alkynylated polyhaloarenes.

Description: A synthetic approach to macromolecules of acetylenic arrays and luminescent properties is proposed and the execution of initial steps is described. Palladium-catalyzed coupling of 1,3,5-triiodobenzene with trimethylsilylbuta-1,3-diyne, trimethylsilylocta-1,3,5,7-tetrayne, and trimethylsilylhexadeca-1,3,5,7,9,11,13,15-octayne to yield the new 1,3,5-tris(trimethylsilylbuta-1,3-diynyl)benzene and the proposed 1,3,5-tris(8-(trimethylsilyl)octa-1,3,5,7-tetraynyl)benzene and 1,3,5-tris(trimethylsilyl)hexadeca-1,3,5,7,9,11,13,15-octaynyl)benzene respectively. The proposed three-coordinate Au (I) complexed macromolecules will be derived from the metallation of the aforementioned alkynylated arenes.
Date: December 2007
Creator: Akintomide, Temiloluwa
Partner: UNT Libraries

The Synthesis and Reactivity of Bis(silyl)acetylenes

Description: Six bis(silyl)acetylenes with the following varied silicon substituents were prepared: I (Me, Me); II (H, H); III (Cl, H); IV (Cl, Cl); V (OMe, H); VI (OMe, OMe). While I and II may be prepared by the reaction of dilithio- or bis(bromomagnesium)-acetylide with appropriate chlorosilane, similar reactions designed to give III - VI give oligomers, YMe_2Si(C≡C-SiMe_2)_nY, VII, Y = Cl, OMe, as the major products indicating that the acetylenic functionality on silicon activates the chlorosilane toward nucleophilic substitution. Compounds III and IV were prepared by free radical chlorination of II. Methanolysis of III and IV gave quantitative yields of V and VI, respectively. In the presence of mineral acid, VI readily cyclized to give high yields of the cyclic siloxane octamethyl-4,9-dioxa-3,5,8,10-tetrasila-cyclodeca-1,6-diyne, VIII, and the analogous triyne, IX. It was determined that V and VI could be prepared directly from II in high yield by methanolysis with palladium catalyst. Vaska's complex also accomplished the conversion. I attempted to prepare bis(ethoxydimethylsilyl)acetylene by using of Wilkinson 's catalyst for hydrosilylation with acetaldehyde. The principal product of this reaction was 1-(dimethylsilyl)-3,5,5-trimethyl-4-oxa-3-silacyclopent-1-ene, XI.
Date: May 1987
Creator: Albanesi, Todd E. (Todd Edward)
Partner: UNT Libraries

Study of Substituted Benzenesulfonate-Containing Layered Double Hydroxides and Investigation of the Hexamethylenetetramine Route of LDH Synthesis

Description: Benzenesulfonates, para-substituted with amine, chloride and methyl groups were successfully incorporated into layered double hydroxides of two different compositions, 2:1 Mg-Al LDH and 2:1 Zn-Al LDH. These parent materials were also doped with small amounts of nickel and the differences in the two systems were studied. The hexamethylenetetramine route of layered double hydroxide synthesis was investigated to verify if the mechanism is indeed homogeneous. This included attempting preparation of 2:1 Mg-Al LDH, 2:1 Zn-Al LDH and 2:1 Zn-Cr LDH with two different concentrations of hexamethylenetetramine. The analytical data of the products suggest that the homogeneous precipitation may not be the true mechanism of reaction involved in LDH synthesis by this method.
Date: May 2007
Creator: Ambadapadi, Sriram
Partner: UNT Libraries

A Study of the Reduction Products of N-(4-Nitrophenacyl)-4-(1-Hexyl)pyridinium Bromide

Description: Because of the structural analogies between these compounds and several other physiologically active compounds, such as chloroamphenicol, 4,4'-diaminodiphenyl sulfone, and 2,2-bis-(p-aminophenyl)-1,1,1-trichloroethane, a more complete study of the reduction products and the sequence of catalytic reduction of N-(4-nitrophenacyl)-4-(1-hexyl)pyridinium bromide was made in this investigation.
Date: 1950
Creator: Arnwine, Bennie C.
Partner: UNT Libraries

Manufacturer [Sic] of Densified-Refuse Derived Fuel (d-RDF) Pellets and Methods for the Determination of d-RDF Pellet Densities

Description: There are 150 million tons of Municipal Solid Waste (MSW) annually produced in the United States, which is approximately equivalent to 150 million barrels of oil. MSW production is inexhaustible, and is increasing on an annual per capita basis of approximately three per cent. After controlling the moisture and adding a binder, the combustible portion of MSW was converted to pellets. The objects of this project were to 1) evaluate the binder, 2) prepare the pellets, and 3) evaluate the pellets with regard to density. The manufacture of pellets was conducted at the Naval Air Station, Jacksonville, Florida. The evaluation of the binders and the pellets was done at North Texas State University (NTSU). There were three procedures for measuring the density. The first, using water displacement, was from the American Society for Testing and Material (ASTM). The second, using wax coating, was also from ASTM. The third, using sharply-cut cylindrical pellets, was developed at NTSU.
Date: December 1986
Creator: Attili, Bassam Saleem
Partner: UNT Libraries

Kinetics of Sulfur: Experimental Study of the Reaction of Atomic Sulfur with Acetylene and Theoretical Study of the Cn + So Potential Energy Surface

Description: The kinetics of the reaction of atomic sulfur with acetylene (S (3P) + C2H2) were investigated experimentally via the flash photolysis resonance fluorescence method, and the theoretical potential energy surface for the reaction CN + SO was modeled via the density functional and configuration interaction computational methods. Sulfur is of interest in modern chemistry due to its relevance in combustion and atmospheric chemistry, in the Claus process, in soot and diamond-film formation and in astrochemistry. Experimental conditions ranged from 295 – 1015 K and 10 – 400 Torr of argon. Pressure-dependence was shown at all experimental temperatures. The room temperature high-pressure limit second order rate constant was (2.10 ± 0.08) × 10-13 cm3 molecule-1 s-1. The Arrhenius plot of the high-pressure limit rate constants gave an Ea of (11.34 ± 0.03) kJ mol-1 and a pre-exponential factor of (2.14 ± 0.19) × 10-11 cm3 molecule-1 s-1. S (3P) + C2H2 is likely an adduct forming reaction due to pressure-dependence (also supported by a statistical mechanics analysis) which involves intersystem crossing. The potential energy surface for CN + SO was calculated at the B3LYP/6-311G(d) level and refined at the QCISD/6-311G(d) level. The PES was compared to that of the analogous reaction CN + O2. Notable energetically favorable products are NCS + O, CO + NS, and CS + NO. The completed PES will ultimately be modeled at the CCSD(T) level (extrapolated to infinite basis set limit) for theoretical reaction rate analysis (RRKM).
Date: May 2013
Creator: Ayling, Sean A.
Partner: UNT Libraries

N-Heterocyclic Carbenes of the Late Transition Metals: A Computational and Structural Database Study

Description: A computational chemistry analysis combined with a crystallographic database study of the bonding in late transition metal N-heterocyclic carbene (NHC) complexes is reported. The results illustrate a metal-carbon bond for these complexes, approximately 4% shorter than that of a M-C single bond found in metal alkyl complexes. As a consequence of this result, two hypotheses are investigated. The first hypothesis explores the possibility of multiple-bond character in the metal-carbon linkage of the NHC complex, and the second, considers the change in the hybridization of the carbenoid carbon to incorporate more p character. The latter hypothesis is supported by the results. Analysis of these complexes using the natural bond orbital method evinces NHC ligands possessing trans influence.
Date: May 2005
Creator: Baba, Eduard
Partner: UNT Libraries

Hydantoin Derivatives as Anticonvulsants. I. 5-Cyclohexylalkyl-5-(2-Thienyl)Hydantoins

Description: The study herein described represents a continuation of the work on 5-(2-thienyl)-5-substituted hydantoins which has been in progress in the laboratories of the North Texas State College for the past several years. It has for its purpose the study of the effect of lengthening the carbon chain connecting a cyclohexyl radical to 5-(2-thienyl)hydantoin in the 5- position.
Date: 1949
Creator: Baker, Andy Albert
Partner: UNT Libraries

Modeling the chemical and photophysical properties of gold complexes.

Description: Various gold complexes were computationally investigated, to probe their photophysical, geometric, and bonding properties. The geometry of AuI complexes (ground state singlet) is very sensitive to the electronic nature of the ligands: σ-donors gave a two-coordinate, linear shape; however, σ-acceptors yielded a three-coordinate, trigonal planar geometry. Doublet AuIIL3 complexes distort to T-shape, and are thus ground state models of the corresponding triplet AuIL3. The disproportionation of AuIIL3 to AuIL3 and AuIIIL3 is endothermic for all ligands investigated, however, σ-donors are better experimental targets for AuII complexes. For dimeric AuI complexes, only one gold center in the optimized triplet exciton displays a Jahn-Teller distortion, and the Au---Au distance is reduced versus the ground state distance (i.e., two reasons for large Stokes' shifts).
Date: August 2004
Creator: Barakat, Khaldoon A.
Partner: UNT Libraries

Quantitative Chemical Analysis of the Soils of Erath County, Texas

Description: A chemical analysis of representative samples of Windthorst sand, Denton sand, and Denton clay has been made, and this analysis shows that their composition has a strict correlation with respect to their geological origins. The analyses of the different soils have shown the Windthorst sand to be highly deficient in all of the essential elements, whereas the Denton sand is deficient in only one; namely, phosphorus. The analysis of the Denton clay showed it to be highly fertile. From the consideration of the pH and the lime content, it has been determined to some extent what crops will grow in each of the soils.
Date: June 1938
Creator: Barnes, Benjamin F.
Partner: UNT Libraries

Infrared Studies of Anions of Barbituric Acids

Description: As long ago as 1881, it was realized that a functional group of atoms in a molecule would cause an absorption band to appear at a particular frequency in the infrared spectrum of the molecule. In more recent years, the concept of characteristic group frequencies has become firmly established and has resulted in the present widespread use of infrared spectroscopy. There appear to have been relatively few studies of infrared absorption of organic acids as compared with their salts.
Date: August 1960
Creator: Barnhart, Richard Lee
Partner: UNT Libraries

Studies on the Biological Activity of N-nitrosamines

Description: Two aspects of the biological activity of N-nitrosamines were studied. First, the effect of ascorbate on the mutagenicity of N-nitrosopiperidines was studied in the Ames Salmanella/ mammalian microsome mutagenicity test. The addition of ascorbate significantly enhanced the mutagenicity of these compounds. This enhancement was selective for N-nitrosamines suggesting a possible role of ascorbate in N-nitrosamine induced carcinogenicity. Second, the technique of velocity sedimentation in alkaline sucrose density gradients was applied to the detection of N-nitrosamine induced DNA damage in Balb/c 3T3 cells. This technique detected N-nitrosamine induced DNA damage when the cells were made permeable before treatment. This technique compares favorably with other test systems used to evaluate N-nitrosamines and should be useful in further studies of N-nitrosamines.
Date: August 1980
Creator: Barton, Rodney A. (Rodney Alan)
Partner: UNT Libraries

Comparison of Homework Systems (Four Web-Based) used in First-Semester General Chemistry

Description: Web-based homework systems are becoming more common in general chemistry as instructors face ever-increasing enrollment. Yet providing meaningful feedback on assignments remains of the utmost importance. Chemistry instructors consider completion of homework integral to students' success in chemistry, yet only a few studies have compared the use of Web-based systems to the traditional paper-and-pencil homework within general chemistry. This study compares the traditional homework system to four different Web-based systems. Data from eight, semester classes consisting of a diagnostic pre-test, final semester grades, and the number of successful and unsuccessful students are analyzed. Statistically significant results suggest a chemistry instructor should carefully consider options when selecting a homework system.
Date: May 2009
Creator: Belland, Joshua
Partner: UNT Libraries