UNT Theses and Dissertations - Browse

ABOUT BROWSE FEED

A Study of the Drafting Curriculum in the Fort Worth Public High Schools, Fort Worth, Texas

Description: This is a study of the drafting curriculum in the Fort Worth public high schools, Fort Worth, Texas.The specific purposes or the study were as follows: 1. To review and compare the courses and content of the drafting curriculums listed in the bulletins of the TEA and the Fort Worth Public Schools. 2. To study drafting scheduling procedures in each of the Fort Worth public high schools. 3. To study the courses and contents of the drafting curriculums offered in each of the Fort Worth public high schools. 4. To determine if there are variations from school to school in curriculum content of the drafting courses in each of the Fort Worth public high schools. 5. To offer suggestions and recommendations for improving the program, if weaknesses were evident, when the program was evaluated by acceptable criteria (12, 13, and 14).
Date: December 1973
Creator: Agee, David W.
Partner: UNT Libraries

The History of the Industrial Arts Department of North Texas State University from 1955 To 1975

Description: This history is designed to study the Industrial Arts Department at North Texas State University, The study is broken down into the areas of enrollment trends, the faculty, the curriculum, and the physical facilities. This study found that the Industrial Arts Department's class card enrollment remained relatively stable from 1955 to 1975. There was little fluctuation in semester credit hours in the Industrial Arts Department from 1955 to 1975. This study also found that the curriculum of the department is designed mainly for undergraduate students, The number of female students is increasing in the department and the number of degrees awarded by the Industrial Arts Department is declining,
Date: December 1977
Creator: Barber, Gerald L.
Partner: UNT Libraries

A Study of the Physical Facilities of Industrial Arts Metalworking Laboratories in the State of Texas

Description: The purposes for conducting this study were to ascertain whether the housing for industrial arts metalworking laboratories was adequate, whether the enrollment of the school showed any correlation with the availability of a metalworking facility, and to what extent the physical facility for metalworking laboratories met current standards.
Date: December 1972
Creator: Teague, Ben W.
Partner: UNT Libraries

The Design, Construction, and Use of a Tri-color Projection Box to be Used in the Instruction of Orthographic Projection

Description: The purposes of the study were as follows: first, to study the literature in the field of teaching drafting with special reference to the use of instructional aides in presenting orthographic projection concerning the use of a projection box; second, to ascertain the value of the use of a tri-color projection box in teaching orthographic projection to an experimental group of students at the R. L. Turner High School, Carrollton, Texas; and third, to determine if an analysis of these data indicates a justification for the use of this type of an instructional aid in teaching orthographic projection.
Date: May 1969
Creator: Harrison, Denist D.
Partner: UNT Libraries

American Apprenticeship and its Contribution to Industrial Arts

Description: The purpose of this study is to show, through the development of the American apprenticeship, certain factors and influences that have contributed to the growth of industrial arts in the public schools of the United States. It has been made to give the prospective industrial arts teacher and student some idea of the history and the importance of their work now and in the future.
Date: May 1950
Creator: Moses, Morgan Clay
Partner: UNT Libraries

The Evolution of Doors and Doorways

Description: It has been desired that this work will provide interested students informative reading concerning doorways as a part of architecture. It is hoped that it will be a literary contribution to the beginning architectural student and that he study will provide a point of interest for the further study of architecture and its many elements.
Date: August 1952
Creator: Griffith, Tom Jack
Partner: UNT Libraries

An Experimental Investigation of the Relative Effectiveness of Two Methods of Teaching Mechanical Drawing

Description: The purpose of this study was twofold: First, to analyze two methods of teaching mechanical drawing in the seventh grade by conducting an experiment to determine by which method the greatest amount of achievement was obtained by the students in the ability to visualize, sketch, letter, and understand three-view drawing; and second, to recommend a work plan and certain teaching techniques for teaching mechanical drawing in the seventh grade of the Santa Fe, New Mexico Junior High School, based upon the method by which the greater amount of achievement was indicated in the study.
Date: August 1950
Creator: McSpadden, C. B.
Partner: UNT Libraries

A Study of the Development of Evening and Night Schools Operating Under the State Board for Vocational Education in Texas

Description: The problem is actually twofold: first, to trace the growth and development of vocational education programs operating in the evening schools of the State of Texas; second, to analyze some of the various types of evening school programs and facilities provided for conducting adult vocational evening schools.
Date: August 1950
Creator: Cochrane, Earl A.
Partner: UNT Libraries

The Extent to which Texas High School Woodworking Laboratories Comply with Standards of the Texas Occupational Safety Board

Description: The purpose of this study is threefold: (1) to identify and compile recommended safety standards for woodworking laboratories concerning guarding of machines, electrical wiring, fire prevention, flooring materials, and aisles; (2) to identify the standards that pertain to the physical facility and equipment used in industrial arts laboratories and to make them available to teachers and administrators for use in renovation of existing facilities and planning new ones; and (3) to determine the extent to which industrial arts woodworking laboratories in Texas high schools are in compliance with the safety standards set forth by the Texas Occupational Safety Board.
Date: December 1972
Creator: Moss, Joe C.
Partner: UNT Libraries

A Study of Contemporary Industrial Arts Education and Industrial Technology Education Programs

Description: This study is an investigation of the baccalaureate degree requirements in industrial arts education and industrial technology education with special emphasis on the similarities and differences between the two curriculums. The criteria used as a basis for comparison are (1) clarification of terminology, (2) historical trends in the development of the present programs, (3) basic program philosophies, (4) curriculum content, (5) objectives sought by each curriculum, (6) number of graduates from each program, and (7) employment of the graduates.
Date: August 1973
Creator: Russum, Isaac J.
Partner: UNT Libraries

A Study to Determine the Need for Additional Programs in Vocational and Industrial Arts Education at Lawrence D. Bell High School

Description: The purpose of this study was to indicate if there exists a need for additional learning experiences in the area of vocational and industrial arts education at Lawrence D. Bell High School. The information acquired from the check list, combined with other related studies, should help establish valid guide lines for curriculum development in this area. This study should provide information as to whether or not the needs of the terminal student and the college preparatory student are dissimilar.
Date: January 1968
Creator: McNeese, Charles H.
Partner: UNT Libraries

A Descriptive Approach to the Development and Implementation of Career Education in the Dallas Independent School System

Description: The problem of this study is to provide a descriptive analysis of research in career-oriented education and a plan of procedure to implement it in the Dallas Independent School District. The first part presents the inception of the career education program, the concept and components of career education, and the scope and goals of career education. The second part division discusses career education precursors and overviews of selected existing programs. The final portion of the study deals with implications of implementation of career education in the Dallas Independent School District.
Date: May 1973
Creator: Kile, Robert Dewayne
Partner: UNT Libraries

A Study of the Methods Used in the Purchasing, Storing, Budgeting, Accounting, Distributing, and Inventorying of Industrial Arts Woodworking Materials in Selected High Schools in the State of Texas

Description: This study was conducted to determine the methods used in the purchasing, storing, budgeting, accounting, distributing, and inventorying of woodworking materials by industrial arts instructors in secondary schools in the state of Texas.
Date: May 1973
Creator: Gomez, Hervey
Partner: UNT Libraries

A Study of the Metalworking Curriculum in Texas High Schools, with Special Reference to the Machine Areas of General Metalworking I and II

Description: The purpose of this study was threefold: (1) to determine what the curriculum offerings were in Texas high schools for General Metalworking I and II during the 1970-71 school year, (2) to determine whether these individual course offerings agreed with the state prescribed curriculum as set forth by the Texas Education Agency, and (3) to determine in what ways the course offerings of the individual schools differed from the state prescribed curriculum.
Date: August 1971
Creator: Henley, Robert P.
Partner: UNT Libraries

The Bauhaus and its Contributions to Design with Suggestions for Improvement of Design in College Industrial Arts Programs

Description: The study of the Bauhaus is threefold in purpose. The first purpose is to study the Bauhaus, located both in Germany and in the United States, and to identify its principles, curriculum, and methods of instruction used in improving design. The second purpose is to identify and present the contributions of this school to design, the third purpose is to suggest ways and means for improvement of design in college industrial arts programs.
Date: June 1965
Creator: Shahabi, Ali R.
Partner: UNT Libraries