UNT Theses and Dissertations - Browse

ABOUT BROWSE FEED

The Bauhaus and its Contributions to Design with Suggestions for Improvement of Design in College Industrial Arts Programs

Description: The study of the Bauhaus is threefold in purpose. The first purpose is to study the Bauhaus, located both in Germany and in the United States, and to identify its principles, curriculum, and methods of instruction used in improving design. The second purpose is to identify and present the contributions of this school to design, the third purpose is to suggest ways and means for improvement of design in college industrial arts programs.
Date: June 1965
Creator: Shahabi, Ali R.
Partner: UNT Libraries

The Design, Construction, and Use of a Tri-color Projection Box to be Used in the Instruction of Orthographic Projection

Description: The purposes of the study were as follows: first, to study the literature in the field of teaching drafting with special reference to the use of instructional aides in presenting orthographic projection concerning the use of a projection box; second, to ascertain the value of the use of a tri-color projection box in teaching orthographic projection to an experimental group of students at the R. L. Turner High School, Carrollton, Texas; and third, to determine if an analysis of these data indicates a justification for the use of this type of an instructional aid in teaching orthographic projection.
Date: May 1969
Creator: Harrison, Denist D.
Partner: UNT Libraries

Job Opportunities and Employment Requirements for a Person Entering the Field of Electronics as a Technician in the Dallas Metropolitan Area

Description: The problem involved in this study was twofold. The first was to ascertain what the employment requirements were for a person seeking employment in the field 6f electronics as a technician in the Dallas Metropolitan Area. The second was to determine what the job opportunities were for those individuals.
Date: January 1965
Creator: Abney, Horace Ray
Partner: UNT Libraries

Principles and Application of Numerically Controlled Machines

Description: The purpose of this study is threefold. First, numerical control will be analyzed objectively to ascertain its justification in terms of meeting the requirements of the basic manufacturing process phases. Secondly, the study will consist of an evaluation of the field of industrial arts in the Dallas-Fort Worth area to determine how numerical control has been accepted in the educational field and what preparation, if any, is being made to include the teaching of this new industrial concept. Thirdly, the study will investigate the feasibility and cost of installing numerically controlled equipment in the industrial arts laboratories of North Texas State University.
Date: May 1968
Creator: Koehler, Richard A.
Partner: UNT Libraries

A Study of Numerically Controlled Machines

Description: This is a study of numerical control, its application, and the design of a numerical control program for a drilling machine. The study sought to obtain information on the function of numerical control; the different types of numerical control used by industry; and, the advantages of using numerical control.
Date: August 1967
Creator: Chan, John C. H.
Partner: UNT Libraries

A Study of the Availability of Industrial Arts Teachers and its Effects Upon the Industrial Arts Programs in the Public Schools of North Texas

Description: The purpose of this study was to determine the availability of qualified industrial arts teachers in the twenty-four North Texas area school districts surveyed; and to ascertain the effects of industrial arts teacher availability upon the status of the industrial arts programs in the school districts surveyed.
Date: August 1968
Creator: Rusk, Artre H., Jr.
Partner: UNT Libraries

A Study of the Course Offerings in Machine Woodworking I and II in the High Schools in the State of Texas to Ascertain if Any Deviations are Made from the State Predescribed Course of Study

Description: This is a study of the course offerings in machine woodworking I and II in the high schools in the state of Texas to ascertain if any deviations have been made from the state proscribed course of study to meet the individual needs of the community.
Date: August 1969
Creator: Uselton, Michael T.
Partner: UNT Libraries

A Study of the Needs, Interests, and Aptitudes of Students Enrolled in Industrial Arts Courses in Denton Senior High School during the 1959-1960 School Year

Description: The purpose of this study is to determine whether or not the present industrial arts program adequately serves the interests, aptitudes, and needs of the students enrolled in the industrial arts courses in Denton Senior High School.
Date: January 1961
Creator: Thompson, Gerry Layton
Partner: UNT Libraries

A Study of the Physical Facilities Needed for Organizing, Administrating, and Implementing Vocational-Industrial Education in the Monahans-Wickett-Pyote Independent School District

Description: The purpose of the study was to gather information that would be helpful in planning and implementing a vocational education program in the Monahans-Wickett-Pyote Independent School District in response to a written request by George L. Cullender, Superintendent of Schools. This study was intended to supplement the Texas Education Agency's occupational survey.
Date: May 1969
Creator: Fielding, Frank T.
Partner: UNT Libraries

A Study of the Recommendations of the Members of the North Texas Industrial Arts Association Relative to the Industrial Arts Programs of Eight State-Supported Institutions of Higher Learning

Description: The purpose of this thesis is two-fold: first, to study the current requirements for the baccalaureate degree in industrial arts in eight state-supported institutions; and second, to compare the recommendations of the members of the North Texas Industrial Arts Association with the existing programs in industrial arts in the state-supported institutions to determine what should constitute an adequate program for the prospective teacher in industrial arts.
Date: January 1965
Creator: Sebastian, Jimmy W.
Partner: UNT Libraries

A Study of the Relationship of Scores Made on the American College Test and Academic Grades Made by Pre-Engineering and Industrial Arts Students

Description: This was a study of the relationship between scores made on the American College Test and academic grades made by pre-engineering and industrial arts students to determine the reliability of American College Test scores when used for counseling and predicting academic grades.
Date: August 1964
Creator: Pressly, Ronald N.
Partner: UNT Libraries

A Study of the Training Received and Duties Performed by the Maintenance Employees in a Selected Group of Acme Brick Company Plants

Description: The major purposes of this study were (1) to obtain information relating to the number and types of areas of work included in the routine duties performed by the maintenance employees employed in a selected group of Acme Brick Company production plants, (2) to determine the nature of any training that may have assisted in the development of their ability to perform the skills normally involved in each area of work, and (3) to recommend to Acme Brick Company areas of instruction to be included in a training program for its employees.
Date: January 1968
Creator: Hickman, Cleo F.
Partner: UNT Libraries

A Study to Determine the Adequacy of the Curriculum in the Technical-Industrial Department at Tyler Junior College

Description: The major purposes of this study were to gather information on the employment status and location of students who completed four or more courses in the technical-industrial program at Tyler Junior College, Tyler, Texas; to identify factors that influenced them in selecting Tyler Junior College and taking courses in the technical-industrial program; to ascertain in some measure the effectiveness of the training these students received in preparing them for the positions they have held and now hold; and to secure data and information which the faculty and administration at Tyler Junior College may use in evaluating the present program with respect to future changes and improvements.
Date: January 1968
Creator: Willis, Robert K.
Partner: UNT Libraries

A Study to Determine the Effectiveness of the Apprenticeship Training Programs Operated by the Craft Trades in Dallas

Description: "The purpose of the study is twofold. First, to determine the effectiveness of the apprenticeship training program in selected building crafts in the Dallas metropolitan area during the period September 1959 to June 1967. In order to arrive at a point of determination concerning the effectiveness of the apprenticeship, it will be necessary to delve into the organization, administration, and implementation of the apprenticeship training program as operated by the Dallas Independent School District in cooperation with the craft trades and their respective labor unions. This will include a study of apprenticeship committees, curriculum, methods of selection of apprentices, and qualifications of instructors for apprenticeship training programs. Second, to determine any weaknesses in the training programs which may exist and to make recommendations for improvement of the program." -- p. 3
Date: January 1969
Creator: Brown, H. C.
Partner: UNT Libraries

A Study to Determine the Need for Additional Programs in Vocational and Industrial Arts Education at Lawrence D. Bell High School

Description: The purpose of this study was to indicate if there exists a need for additional learning experiences in the area of vocational and industrial arts education at Lawrence D. Bell High School. The information acquired from the check list, combined with other related studies, should help establish valid guide lines for curriculum development in this area. This study should provide information as to whether or not the needs of the terminal student and the college preparatory student are dissimilar.
Date: January 1968
Creator: McNeese, Charles H.
Partner: UNT Libraries

A Study to Determine the Need for and Interest in a Vocational Industrial Education Program in the Eagle Mountain-Saginaw School District

Description: This study was made to gather information and data to aid the administration of the Eagle Mountain-Saginaw School District in making a decision as to whether a vocational industrial education program was needed and if so what courses should be included.
Date: January 1967
Creator: Dennis, Thomas E.
Partner: UNT Libraries

A Study to Determine the Need for and Interest in an Electricity-Electronics Course in the Industrial Arts Department of Amarillo High School

Description: This study was made to gather information and data concerning the electrical industry of Amarillo, Texas, and to determine the desirability of an electricity-electronics course in the Industrial Arts Department of Amarillo High School, Amarillo, Texas.
Date: August 1969
Creator: Hicks, Jacky C.
Partner: UNT Libraries