Technical Report Archive and Image Library (TRAIL) - Browse

ABOUT BROWSE FEED

Idaho Division Summary Report

Description: Report issued by the Argonne National Laboratory discussing a summary of projects conducted with the Idaho Division. Descriptions of each project are presented. This report includes tables, and illustrations.
Date: 1961
Creator: Novick, Meyer & Thalgott, F. W.
Partner: UNT Libraries Government Documents Department

Particle Accelerator Division Summary Report: April Through September 1960

Description: Report issued by the Argonne National Laboratory discussing a summary report of the Particle Accelerator Division. As stated in the summary, "this report outlines two methods applicable respectively to longhand and computer calculations" (p. 4). This report includes tables, illustrations, and photographs.
Date: 1960
Creator: Crewe, Albert V.; FitzPatrick, John P.; Foss, Martyn H. & Manson, David S.
Partner: UNT Libraries Government Documents Department

Liquid MHD Power Cycle Studies

Description: Report issued by the Argonne National Laboratory discussing the magnetohydrodynamics (MHD) power cycle for liquid metals. The benefits, and different phases of the MHD power cycle are presented. This report includes tables, and illustrations.
Date: June 1965
Creator: Petrick, Michael & Lee, Kung-You
Partner: UNT Libraries Government Documents Department

Design and Testing of a High-Heat Flux Electron-Bombardment Heater

Description: Report issued by the Argonne National Laboratory discussing the testing of an electron-bombardment heater. As stated in the abstract, "the applications of electron-bombardment heating to liquid-metal heat transfer and reactor safety experiments are discussed. The design of a high-heat-flux, electron-bombardment heater (EBH) is presented" (p. 7). This report includes tables, illustrations, and photographs.
Date: March 1968
Creator: Carlson, R. D. & Holtz, R. E.
Partner: UNT Libraries Government Documents Department

Midwest Tandem Cyclotron: A Proposal for a Regional Accelerator Facility

Description: Report issued by the Argonne National Laboratory discussing the proposal of the Midwest Tandem-Cyclotron accelerator facility. Descriptions of the facility designs, methods, and operations are presented. This report includes tables, illustrations, and photographs.
Date: June 1969
Creator: Argonne National Laboratory
Partner: UNT Libraries Government Documents Department

A Hybrid-Computer Program for Transient Temperature Calculations on TREAT Fast Reactor Safety Experiments

Description: Report issued by the Argonne National Laboratory discussing a computer program used for fast reactor safety experiments. As stated in the summary, "this report gives a detailed description of a hybrid-computer program for calculating temperatures in a multi-region, axisymmetric, cylindrical configuration consisting of solid materials bounded by flowing coolant. Included is an explanation of the mathematical methods, together with a discussion of special features, input-output descriptions, and several sample problems" (p. 7). This report includes tables, and illustrations.
Date: September 1967
Creator: Bryant, Lawrence T.; Dickerman, Charles E. & Stephany, William P.
Partner: UNT Libraries Government Documents Department

A Generalized Computer Program for Flowsheet Calculation and Process Data Reduction

Description: Report issued by the Argonne National Laboratory discussing the PACER-65 computer program. As stated in the summary, the program "has been developed and utilized for flow sheet calculations and process-data reduction. PACER-65 is an executive program in which material- and energy-balance equations, conversion factors, etc., for each processing step are described by separate subroutines" (p. 5). This report includes tables, and illustrations.
Date: April 1966
Creator: Koppel, L. B.; Alfredson, P. G.; Anastasia, L. J.; Knudsen, I. E. & Vogel, G. J.
Partner: UNT Libraries Government Documents Department

Performance Characteristics of a Liquid Metal MHD Generator

Description: Report issued by the Argonne National Laboratory discussing the performance of magnetohydrodynamic generators. As stated in the abstract, "an experimental study was made of the performance characteristics of a liquid metal MHD generator utilizing single-phase sodium-potassium and two-phase sodium-potassium-nitrogen fluids. The purpose of this study was to compare the generator performance with theory for single-phase flow and to determine the effects of the introduction of the gaseous phase on the generator output and efficiency" (p. 9). This report includes tables, illustrations, and photographs.
Date: July 1964
Creator: Petrick, Michael & Lee, Kung-You
Partner: UNT Libraries Government Documents Department

A Report on Some Attempts to Cast Centrifugally Fuel Elements of Small Diameter

Description: Report issued by the Argonne national Laboratory discussing centrifugal casting of thin uranium plates. The applicability of the centrifugal casting technique to the production of multiple castings of fuel pins of small diameter and of thin fuel plates was investigated. This report includes tables, illustrations, and photographs.
Date: March 1961
Creator: Yaggee, F. L.
Partner: UNT Libraries Government Documents Department

Irradiation of an Aluminum Alloy-Clad, Aluminum-Uranium Alloy-Fueled Plate

Description: Report issued by the Argonne National Laboratory discussing irradiation tests of an aluminum alloy-clad, aluminum-uranium alloy fuel plate. As stated in the introduction, "calculations were made to determine the lowest possible pressure which would allow the maximum possible local boiling on the plate and still assure a margin of safety against burnout" (p. 9). This report includes tables, illustrations, and photographs.
Date: July 1960
Creator: Gavin, A. P. & Crothers, C. C.
Partner: UNT Libraries Government Documents Department

Cost Study of a 100-Mw(e) Direct-Cycle Boiling Water Reactor Plant

Description: Report issued by the Argonne national Laboratory discussing a technical and economic evaluation of a direct-cycle light-water boiling reactor designed for natural circulation and internal steam-water separation. The reference 100-Mw(e) reactor power plant design evolved from the study should have the best chance (compared to similar plants) of approaching the 8 to 9 mill/kwh total power-cost level. This report includes tables, and illustrations.
Date: July 1960
Creator: Bullinger, C. F. & Harrer, J. M.
Partner: UNT Libraries Government Documents Department

Condensation of Metal Vapors: Mercury and the Kinetic Theory of Condensation

Description: Report issued by the Argonne National Laboratory discussing condensation theories of metal vapors. As stated in the introduction, "the objectives of this research then are critical analysis of condensation theories and data for metal vapors and experimental evaluation of the resistance to condensation for a representative metal such as mercury" (p. 18). This report includes tables, illustrations, and photographs.
Date: October 1964
Creator: Wilhelm, Donald J.
Partner: UNT Libraries Government Documents Department

Design of the Argonne Low Power Reactor (ALPR)

Description: Report containing "[a] description (...) of the design of a prototype "packaged" nuclear power plant. The purpose of the plant is to alleviate fuel oil logistics and storage problems posed by remote auxiliary DEW Line radar stations north of the Arctic Circle. The ALPR (redesignated SL-1) is a 3 Mwt, heterogeneous, highly enriched uranium- fueled, natural-circulation boiling water reactor, cooled and moderated with light water. Steam at 300 psig, dry and saturated (421 deg F) is passed directly from the reactor to a conventional turbine-generator to produce electric power (300 kw nominal) and space-heating (400 kw) requirements consistent with rigid mechanical and structural specifications prescribed by the military, and dictated by the extreme geophysics prevailing at the ultimate site. The over-all design criteria emphasize: simplicity and reliability of operation and maintenance, with minimum supervision; minimum on-site construction; maximum use of standard components; limited water supply; utilization of local gravel for biological shielding; transportability by air lift; and nominal 3-year fuel operating lifetime per core loading." (p. 15)
Date: May 1961
Creator: Hamer, E. E.; Grant, N. R.; Hooker, H. H.; Jorgensen, G. L.; Kann, W. J.; Lipinski, W. C. et al.
Partner: UNT Libraries Government Documents Department

Dynamic Analysis of Coolant Circulation in Boiling Water Nuclear Reactors

Description: Report concerning the study of the two-phase flow through the cooling channels of a natural-circulation boiling water nuclear reactor. "One-dimensional conservation equations describing the flow through each channel are written in the linearized perturbed form, and Laplace transformation in time is performed." (p. 5)
Date: April 1964
Creator: Sanathanan, Chathilingath K.
Partner: UNT Libraries Government Documents Department

An Experimental Investigation of Two-Phase, Two-Component Flow in a Horizontal, Converging-Diverging Nozzle

Description: Report that "describes an investigation of the flow characteristics in a horizontal, converging-diverging nozzle for a two-phase, two-component system" (p. 1) using air and water and "attempting to determine the effects of accelerating the liquid phase by the gaseous phase" (p. 1).
Date: July 1963
Creator: Vogrin, Joseph A., Jr.
Partner: UNT Libraries Government Documents Department

The Facility 350 Helium-Atmosphere System

Description: Report describing the helium atmosphere system in the Argonne National Laboratory's Facility 350. The atmosphere's ability to remove moisture, oxygen, and other impurities, how the atmosphere is purified, and experimental data regarding the use of activated carbon to absorb oxygen from helium are discussed.
Date: December 1962
Creator: Mayfield, R. M.; Tope, W. G. & Shuck, A. B.
Partner: UNT Libraries Government Documents Department

Description and Proposed Operation of the Fuel Cycle Facility for the Second Experimental Breeder Reactor (EBR-II)

Description: Report regarding "[t]he Fuel Cycle Facility for the Second Experimental Breeder Reactor (EBR-II), the process equipment, and the operations to be conducted in the facility are described. The Fuel Cycle Facility is a plant for reprocessing, by pyro-metallurgical methods, the core and blanket material discharged from EBR-II. The reactor core alloy is uranium-5 percent fissium and contains about 46 wt.% Uranium-235 . The blanket material consists of uranium in which plutonium is bred. Core and blanket subassemblies contained in transfer coffins are transferred between EBR-II and the Fuel Cycle Facility, which is in an adjacent building." (p. 13)
Date: April 1963
Creator: Hesson, J. C.; Feldman, M. J. & Burris, L.
Partner: UNT Libraries Government Documents Department

Design Summary Report on the Juggernaut Reactor

Description: Report issued by the Argonne National Laboratory over design studies conducted on the Juggernaut reactor. Design processes, and methods are presented and discussed. This report includes tables, illustrations, and photographs.
Date: September 1962
Creator: Folkrod, J. R.; Ember, G.; Kolb, W.; Saluja, J. & Moon, D. P.
Partner: UNT Libraries Government Documents Department