Search Results

open access

Enclosure Pressure Calculation Method

Description: A method of determining enclosure pressure in the event of a reactor rupture is presented and a sample calculation is shown. This method was used in calculating the design pressure of the Dresden Nuclear Power Station enclosure.
Date: October 6, 1956
Creator: Bailey, J. A.
Partner: UNT Libraries Government Documents Department
open access

Enclosure Section of the Hazards Summary Report for the Dresden Nuclear Power Station

Description: The General Electric Company is designing and building a 180,000 kilowatt nuclear power plant for the Commonwealth Edison Company at a site near the confluence of the Kankakee and Des Plaines Rivers in Grundy County, Illinois, about 47 miles southwest of Chicago. The plant will be known as the Dresden Nuclear Power Station, and will employ a nuclear reactor of the dual-cycle boiling water type.
Date: January 24, 1957
Creator: Commonwealth Edison Company
Partner: UNT Libraries Government Documents Department
open access

The Determination of Fission Product Gamma Doses

Description: In this paper arbitrary limits of the general fission source gamma problem are set. Then, by assuming cooling of at least one day, it is shown that only twelve different fission product gamma sources need ever be considered.
Date: February 25, 1957
Creator: Ruehle, William G.
Partner: UNT Libraries Government Documents Department
open access

Steam Slip and Burnout in Bulk Boiling Systems

Description: In concurrent flow of two phase mixtures there exists a velocity difference between the vapor and liquid phases. This difference in velocity is known as the slip velocity. The prediction of slip is the subject of Part I. In boiling systems there is some heat transfer rate at which nucleste boiling becomes unstable. At this point the separate bubbles coalesce forming an insulating vapor film on the heat transfer surface resulting in the destruction, or burnout, of the heater. The prediction of t… more
Date: June 5, 1957
Creator: Gelson, A. E.
Partner: UNT Libraries Government Documents Department
open access

Final Summary Safeguards Report For The General Electric Test Reactor

Description: This report is submitted to the U. S. Atomic Energy Commission as a final summary safeguards and hazards evaluation of a proposed test reactor at its Vallecitos Atomic Laboratory in Alameda County of California. It is the purpose of this report to provide sufficient data to obtain an AEC facility license for the reactor.
Date: February 20, 1958
Creator: Andersen, R. K. & Jacobs, I. M.
Partner: UNT Libraries Government Documents Department
open access

Amendment No. 1 to Preliminary Hazards Summary Report For The Dresden Nuclear Power Station

Description: Commonwealth Edison Company for the purpose of supplementing the license application for the Dresden Nuclear Power Station submits herewith Amendment No.1 to the portion of the Final Hazards Summary Report entitled Preliminary Hazards Summary Report.
Date: May 26, 1958
Creator: Commonwealth Edison Company
Partner: UNT Libraries Government Documents Department
open access

Operating Procedures and Emergency Plans for the Dresden Nuclear Power Station

Description: The General Electric Company is designing and building a 180,000 kilowatt nuclear power plant for the Commonwealth Edison Company at a site 47 miles southwest of Chicago. The construction permit was issued on May 4, 1956 but is subject to submittal to the Commission of a final hazards summary report and a finding by the Commission that the final design provides reasonable assurances that the health and safety of the public will not be endangered by operation of the reactor in accordance with th… more
Date: June 5, 1958
Creator: Commonwealth Edison Company
Partner: UNT Libraries Government Documents Department
open access

NPR; Tube to Nozzle Connection and Zircaloy-2 to Stainless Steel Tube Connection

Description: Zircaloy-2 tubing was successfully joined to austenetic and ferritic stainless steel tubing by fusion bonding. Tungsten inert gas welding was employed to join a flange to a pressure tube. This work was performed to help determine the design of pressure tubes of a pressure tube reactor.
Date: November 18, 1958
Creator: Smith, W. R. & Klepfer, H. H.
Partner: UNT Libraries Government Documents Department
open access

Amendment No. 4 to Hazards Summary Report For The Dresden Nuclear Power Station

Description: This report is an amendment to the Preliminary Hazards Summary Report (1) and the Operating Procedures and Emergency Plans (5) for the Dresden Nuclear Power Station, submitted to the United States Atomic Energy Commission on September 3, 1957, and June 5, 1958, respectively.
Date: February 6, 1959
Creator: Commonwealth Edison Company
Partner: UNT Libraries Government Documents Department
open access

The Rhode Island and Providence Plantations Atomic Energy Commission Nuclear Science Center Volume II - Safeguard Report

Description: This report presents the description and safeguard evaluation of an open pool research and test reactor rated at one megawatt. The reactor is being proposed by the General Electric Company to the Rhode Island and Providence Plantation Atomic Energy Commission.
Date: May 20, 1959
Creator: General Electric Company
Partner: UNT Libraries Government Documents Department
open access

Hydraulic Instability In a Natural Circulation Loop With Wet Steam Generation at 1000 PSIA

Description: Experimental test loops have been used to study the problem of hydraulic stability. The oscillatory behavior of a single-phase and two-phase natural circulation loop has been examined at atmospheric pressures and oscillating modes of operation were studied in terms of heat input.
Date: July 15, 1959
Creator: Levy, S. & Beckjord, E. S.
Partner: UNT Libraries Government Documents Department
open access

Post-Irradiation Examination of Cored, Edge Loaded, Thoria-Urania Nuclear Fuel

Description: Three edge loaded thoria-urania nuclear fuel samples were assembled into a capsule, irradiated and examined. This irradiation was the first of a series to develop thoria-urania fuel for high heat flux, specific power and burn-up operation in a sodium graphite reactor.
Date: July 15, 1959
Creator: Slosek, T. J.
Partner: UNT Libraries Government Documents Department
open access

N. S. Savannah Fuel Design and Development Program: Fuel Rod Vibration (Preliminary Report)

Description: This is a preliminary report on the investigation of the N.S. Savannah replacement fuel rod vibration amplitude when excited by water flowing parallel to the axis of the fuel rod. Methods of calculating the fuel rod frequency in air were verified by experiment. Work is continuing to establish the validity of methods of calculating natural frequencies in water and to confirm the correlation of flow induced vibration amplitude found in reference (1).
Date: September 25, 1959
Creator: Bailey, J. A. & Shields, C. M.
Partner: UNT Libraries Government Documents Department
open access

Collected Methods for Analysis of Sodium Metal

Description: Methods for analyzing chemical impurities in sodium metal samples are presented. Chemical analysis was used to determine the following impurities: Calcium, Carbon, Chromium, Iron, Lithium, Nickel, Oxygen, Potassium, and Zirconium. Spectrographic analysis was used to determine many other impurities. Sodium samples obtained from experimental apparatus operated as part of the work being conducted for Atomics International were analyzed by these methods.
Date: October 15, 1959
Creator: Perrine, H. E.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen