Technical Report Archive & Image Library (TRAIL) - 238 Matching Results

Search Results

Results: 1 - 24 next
open access

The additional-mass effect of plates as determined by experiments

Description: From Introduction: "The apparent increase in the inertia properties of a body moving in a fluid medium has been called the additional-mass effect. This report presents a resume of test procedures and results of experimental determinations of the additional-mass effect of flat plates. In addition to data obtained from various foreign sources and from a NACA investigation in 1933, the results of tests recently conducted by the National Advisory Committee for Aeronautics are included."
Date: 1941
Creator: Gracey, William
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Characteristics of Naca 4400R Series Rectangular and Tapered Airfoils, Including the Effect of Split Flaps

Description: "At the request of the Bureau of Aeronautics, Navy Department, tests were made in the variable-density wind tunnel of a tapered wing of 3-10-18 plan form and based on the NACA 4400R series sections. The wing was also tested with 0.2 chord split flaps, deflected 60 degrees, in the center of the wing and having flat span to wing span ratios of 0.3, 0.5, 0.7, and 1.0, respectively" (p. 1).
Date: January 1941
Creator: Greenberg, Harry
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Characteristics of NACA 4400R Series Rectangular and Tapered Airfoils, Including the Effect of Split Flaps

Description: "At the request of the Bureau of Aeronautics, Navy Department, tests were made in the variable-density wind tunnel of a tapered wing of 3-10-18 plan form and based on the NACA 4400R series sections. The wing was also tested with 0.2 chord spit flaps, deflected 60 deg span ratios of 0.3, 0.5, 0.7 and 1.0 respectively. In order to get data from which to calculate the characteristics of the flapped wing, the investigation was extended to include tests of the four rectangular airfoils of the NACA 4… more
Date: January 1941
Creator: Greenberg, Harry
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Coal-Mine Accidents in the United States, 1938

Description: Report compiled by the U.S. Bureau of Mines including statistics on fatal and non-fatal accidents in coal mines located in the United States as well as data regarding the various operations (e.g., number of miners employed and average production). The information is organized into tables for comparison and the text draws some overall conclusions in the summary.
Date: 1941
Creator: Adams, W. W.; Geyer, L. E. & Parry, M. G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Collecting and Examining Subsurface Samples of Petroleum

Description: Report issued by the Bureau of Mines discussing subsurface samples of petroleum. As stated in the scope of report, "the Bureau of Mines has developed special equipment and procedures for obtaining samples of petroleum under pressure from the bottom of wells and for examining these samples in the laboratory" (p. 4). This report includes tables, illustrations, and a photograph.
Date: 1941
Creator: Grandone, Peter & Cook, Alton B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Compressive Yield Strength of Extruded Shapes of 24ST Aluminum Alloy

Description: The following report discusses an investigation that was made to determine the tensile and the compressive properties of a large number of 24ST extruded shapes selected at random from commercial production in order to investigate the interrelation of these properties.
Date: January 1941
Creator: Templin, R. L.; Howell, F. M. & Hartmann, E. C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Contributions to the Data on Theoretical Metallurgy: [Part] 9. The Entropies of Inorganic Substances. Revision (1940) of Data and Methods of Calculation

Description: From Introduction: "This bulletin originally was planned as a second revision of the first member of this series, the first revision (249) having appeared in 1936; however, because of requests for the explanatory, section of the first bulletin from those teaching thermodynamics, it was decided to combine the information in the first bulletin and its revision with the data that have appeared since 1935 and to repeat the explanatory material in somewhat more detail. The purpose of this bulletin i… more
Date: 1941
Creator: Kelley, K. K.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Design charts for cross-flow tubular intercoolers charge-across-tube type

Description: Report presenting equations relating the various dimensions, air mass flow, and performance of a cross-flow tubular intercooler in which the charge flows across and the cooling air through the tubes. Design charts are presented from which the intercooler design characteristics and performance can be quickly determined.
Date: January 1941
Creator: Reuter, J. George & Valerino, Michael F.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Determination of control-surface characteristics from NACA plain-flap and tab data

Description: From Summary: "The data from previous NACA pressure-distribution investigations of plain flaps and tabs with sealed gaps have been analyzed and are presented in this paper in a form readily applicable to the problems of control-surface design. The experimentally determined variation of aerodynamic parameters with flap chord and tab chord are given in chart form and comparisons are made with the theory. With the aid of these charts and the theoretical relationships for a thin airfoil, the aerody… more
Date: 1941
Creator: Ames, Milton B., Jr. & Sears, Richard I.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Effect of Alternately High and Low Repeated Stresses Upon the Fatigue Strength of 25S-T Aluminum Alloy

Description: "Fatigue tests were made on one lot of 3/4 inch diameter rolled-and-drawn 25S-T aluminum-alloy rod normal in composition and tensile properties. The specimens were tested at 3500 cycles per second in a rotating-beam fatigue test machine. Tests were made for three ratios (20:1, 50:1, and 200:1) of the number of cycles applied at low stress to the number applied at high stress. In general, failure occurred when the number of cycles at either the low or the high stress approached the ordinary fati… more
Date: January 1941
Creator: Stickley, G. W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Geologic Structure and Occurrence of Gas in Part of Southwestern New York: Part 2. Subsurface Structure in Part of Southwestern New York and Mode of Occurrence of Gas in the Medina Group

Description: Abstract: Based on the records of several hundred deep wells, contour maps have been prepared showing the monoclinal structure of part of western New York, and isopach lines have been drawn showing the westward convergence of the rocks. The mode of occurrence of natural gas in the Medina group is briefly discussed. The location of the gas fields has not been determined by structural traps, but rather stratigraphy and lithology are the controlling factors in trapping the gas, which occurs in por… more
Date: 1941
Creator: Richardson, G. B. (George Burr)
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Internal-Flow Systems for Aircraft

Description: An investigation has been made to determine efficient arrangements for an internal-flow system of an aircraft when such a system operates by itself or in combination with other flow systems. The investigation included a theoretical treatment of the problem and tests in the NACA 5-foot vertical wind tunnel of inlet and outlet openings in a flat plate and in a wing.
Date: 1941
Creator: Rogallo, F. M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Magnetic Separation of Ores

Description: Report issued by the Bureau of Mines over studies conducted on the removal of magnetic materials from iron ores. As stated in the introduction, "this report discusses briefly operations and trends in magnetic separation, explains magnetic separation, describes and classifies the machines used, and outlines their development" (p. 1). This report includes tables, and illustrations.
Date: 1941
Creator: Dean, Reginald S. & Davis, Charles Wesley
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Metal- and Nonmetal-Mine Accidents in the United States During the Calendar Year 1939 (Excluding Coal Mines)

Description: Report published by the U.S. Bureau of Mines regarding accidents at mines located in the United States for all operations except coal mines. The report includes statistics about the number and kinds of accidents as well as information about the mining operations (i.e., number of persons employed, average amount of work performed per person, etc.).
Date: 1941
Creator: Adams, William W. & Kolhos, Mary E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Metal-Mine Accidents in the United States During the Calendar Year 1938

Description: Report issued by the U.S. Bureau of Mines covering accidents that happened in metal mines located in the United States including statistics for injuries, fatalities, kinds and causes of accidents, and operational data, such as number of mine workers and shifts worked.
Date: 1941
Creator: Adams, William W. & Kolhos, Mary E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Mineral Industry of Alaska in 1939

Description: From Introduction: "The presentation of a yearly record of the Alaska mineral industry is a continuing service that has been rendered by the Geological Survey from almost the earliest years of extensive mining in Alaska, and the present report for 1939, is the thirty-sixth of this series.These reports therefore serve miners, prospectors, and businessmen concerned with Alaska affairs as useful historical records, statements of contemporary conditions, and starting points on which some conjecture… more
Date: 1941
Creator: Smith, Philip S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Mining Practices and Safety at the Lava Cap Gold Mining Corporation Mines, Nevada City-Grass Valley District, California

Description: Report issued by the Bureau of Mines discussing mining safety in the Grass Valley mining district. As stated in the introduction, "the purpose of this paper is not to present an outstanding safety record but to show that gold mining can be pursued with the same degree of safety and improvement as any other industry, if and when the management recognizes that it can and must be done" (p. 1). This report includes tables, maps, illustrations, and photographs.
Date: 1941
Creator: Ash, S. H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Model Tests of a Wing-Duct System for Auxiliary Air Supply

Description: Report discusses the design of a cooling system developed for a Pratt & Whitney H-2800 engine equipped with a two-stage supercharger. The wing-duct system was newly developed and was determined to be a valuable method for cooling engine auxiliaries by combining simplicity with low drag and excellent cooling capabilities.
Date: January 1941
Creator: Bierman, David & Corson, Blake W., Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen