Technical Report Archive and Image Library (TRAIL) - Browse

ABOUT BROWSE FEED

WR15 Microwave Calorimeter and Bolometer Unit

Description: Descriptions of the principal changes in the calorimeter and bolometer unit from the WR28 models of a microwave serving as National Bureau of Standards standard for power measurements in the frequency range 50 to 75 GHz.
Date: May 1972
Creator: Harvey, Morris E.
Partner: UNT Libraries Government Documents Department

Analysis of Tentative Seismic Design Provisions for Buildings

Description: Report issued by the U.S. National Bureau of Standards discussing an analysis of seismic design provisions for buildings with three main objectives. As stated in the introduction, "The first objective was to assist the ATC in the preparation of its report. The second objective of the study was to augment the text of the published Provisions by providing a formal, consistent documentation of the text. The third objective was to provide alternate arrangements of the Provisions that would make them more readily usable by several categories of users" (p. 1). This report includes illustrations.
Date: July 1979
Creator: Harris, James Robert; Fenves, Steven J. & Wright, Richard N.
Partner: UNT Libraries Government Documents Department

Construction of a Large Transverse Electromagnetic Cell

Description: Report issued by the U.S. National Bureau of Standards discussing the construction of large electromagnetic cells. As stated in the introduction, "this instruction provides information and procedures necessary to fabricate a large transverse electromagnetic (TEM) cell to be used for experimental "electromagnetic interference" (EMI) evaluation studies" (p. 1). This report includes illustrations, and photographs.
Date: February 1979
Creator: Decker, W. F. & Wilson, W. A.
Partner: UNT Libraries Government Documents Department

Guideline on Major Job Accounting Systems: The System Management Facilities (SMF) for IBM Systems Under OS/MVT

Description: Report issued by the U.S. National Bureau of Standards discussing the System Management Facilities for IBM systems. As stated in the introduction, "the purpose of SMF, as stated in the IBM manual, is to provide the means for gathering and recording information that can be used for billing customers or evaluating system usage" (p. 1). This report includes tables, and illustrations.
Date: October 1978
Creator: Durbin, Gary; Kinney, Todd; Lamasney, Peter; Newman, Edward & Syrett, Edward
Partner: UNT Libraries Government Documents Department

Recommended Practice for the Use of Metric (SI) Units in Building Design and Construction

Description: Report issued by the U.S. National Bureau of Standards discussing the use of metric units of measurement during construction. As stated in the scope, "this document outlines a selection of SI units, with multiples and sub-multiples, for general use in building design and construction" (p. 1). This report includes tables, and illustrations.
Date: April 1977
Creator: Milton, Hans J.
Partner: UNT Libraries Government Documents Department

Selection of Data Entry Equipment

Description: Report issued by the U.S. National Bureau of Standards discussing information on data entry equipment selection by Federal agencies and organizations. As stated in the abstract, "this report provides information about economic and general operational considerations, steps to be followed in acquisition and training, and other factors pertinent to data entry equipment selection" (p. iii). This report includes a table.
Date: November 1979
Creator: Recicar, Steve A.
Partner: UNT Libraries Government Documents Department

Tentative Provisions for the Development of Seismic Regulations for Buildings: A Cooperative Effort with the Design Professions, Building Code Interests, and the Research Community

Description: Report issued by the U.S. National Bureau of Standards discussing building codes and standards in earthquake-prone areas. As stated in the introduction, "the basic purpose of this project is to present, in one comprehensive document, current state-of-knowledge in the fields of engineering seismology and engineering practice as it pertains to seismic design and construction of buildings" (p. 1). This report includes tables, and illustrations.
Date: June 1978
Creator: Applied Technology Council
Partner: UNT Libraries Government Documents Department

Geometrical Considerations and Nomenclature for Reflectance

Description: Report issued by the U.S. National Bureau of Standards discussing specifications of reflectance and proposed nomenclature. As stated in the introduction, "this monograph presents a unified approach to the specification of reflectance in relation to the beam geometry of both the incident and the reflected flux in any reflectometer or in any application of measured reflectance data" (p. 1). This report includes illustrations.
Date: October 1977
Creator: Nicodemus, F. E.; Richmond, J. C.; Hsia, J. J.; Ginsberg, I. W. & Limperis, T.
Partner: UNT Libraries Government Documents Department

Automatic Indexing: A State-of-the-Art Report

Description: Report issued by the U.S. National Bureau of Standards discussing results of a survey conducted on automatic mechanized indexing and data processing. As stated in the introduction, "it has concentrated on the major developments in and related demonstrations of automatic indexing potentialities. Examples are also given of indexes compiled by machine and of potentially related research efforts in such areas as natural language text searching, statistical association techniques used for search and retrieval, and proposed systems for concept processing" (p. 1). This report includes an illustration.
Date: February 1970
Creator: Stevens, Mary Elizabeth
Partner: UNT Libraries Government Documents Department

Life-Cycle Costing: A Guide for Selecting Energy Conservation Projects for Public Buildings

Description: Report issued by the Bureau of Standards discussing the energy conservation of public buildings. As stated in the introduction, "this report focuses on the establishment of a technically correct, practical, standardized approach for evaluating proposed energy conservation improvements in public buildings" (p. 2). This report includes tables, illustrations, and photographs.
Date: September 1978
Creator: Ruegg, Rosalie T.; McConnaughey, John S.; Sav, G. Thomas & Hockenbery, Kimberly A.
Partner: UNT Libraries Government Documents Department

Geographical Variation in the Heating and Cooling Requirements of a Typical Single-Family House, and Correlation of These Requirements to Degree Days

Description: Report issued by the Bureau of Mines discussing the heating and cooling requirements for single-family homes. These requirements are determined from "Test Reference Year," or TRY data and long-term geographic climate information. This report includes tables, illustrations, photographs, and a map.
Date: November 1978
Creator: Arens, Edward A. & Carroll, William L.
Partner: UNT Libraries Government Documents Department

Brief History of Measurement Systems: with a Chart of the Modernized Metric System

Description: Pamphlet issued by the United States National Bureau of Standards providing an overview of the English system of measurement used in the United States and of the metric system. The internal pages of the pamphlet contain a chart labeled "The Modernized Metric System" which includes tables of common conversions and a chart of the seven base units: meter/length, kilogram/mass, second/time, ampere/electric current, kelvin/temperature, mole/amount of substance, and candela/luminous intensity, as well as two supplementary units: radian/plane angle and steradian/solid angle. There is also a graphic representation of yards versus meters in ruler form at the bottom.
Date: August 1976
Creator: United States. National Bureau of Standards.
Partner: UNT Libraries Government Documents Department

Some References on Metric Information, Including a Chart on All You Need to Know About Metric

Description: Pamphlet issued by the United States National Bureau of Standards containing a list of government pamphlets, reports, and other resources related to the metric system of measurement. It includes a form for ordering materials from the Government Printing Office as well as an illustrated description of everyday conversions for weight, volume, length, and temperature.
Date: January 1977
Creator: United States. National Bureau of Standards.
Partner: UNT Libraries Government Documents Department

What About Metric?

Description: Pamphlet issued by the United States National Bureau of Standards discussing the reasons that the U.S. decided passed the Metric Conversion Act of 1975 and provides tables, illustrations, and formulas for converting between customary units and metric units of measuring weight, length, volume, and temperature. It also includes a discussion of how one might expect to use metric measurements in the marketplace, in the home, and at work.
Date: October 1976
Creator: Barbrow, Louis E. & Halpin, Suellen
Partner: UNT Libraries Government Documents Department

America Joins a Metric World

Description: Pamphlet issued by the United States National Bureau of Standards discussing the Metric Conversion Act of 1975, the work of the U.S. Metric Board, and how government agencies are facilitating a switch to the metric system.
Date: February 1976
Creator: United States. National Bureau of Standards.
Partner: UNT Libraries Government Documents Department

[United States National Bureau of Standards Metric Conversion Card]

Description: Conversion card issued by the United States National Bureau of Standards containing conversion information for length, area, mass (weight), volume, and temperature (exact). The front lists "Approximate Conversions to Metric Measures" and includes a continuum of temperatures at the bottom and a centimeter ruler along the right side (to 8 cm.). The back of the card lists "Approximate Conversions from Metric Measures" and includes an inch ruler along the right side (to 3 in.).
Date: May 1976
Creator: United States. National Bureau of Standards.
Partner: UNT Libraries Government Documents Department