Technical Report Archive & Image Library (TRAIL) - 2,176 Matching Results

Search Results

Results: 1 - 24 next
open access

Thorium Bismuthide : Ultrasonic Control of Crystal Size

Description: Thorium bismuthide when crystallized from a solution i bismuth results in large platelets which may be as large a 1 centimeter in diameter. A slurry of these platelets is difficult to pump through pipe lines and filters. The particle size can be reduced by (1) very rapid cooing (approximately 1000 degree C per second) or (2) ultrasonic treatment. The latter, much easier to attain in large scale, gives equiaxed particles of thorium bismuthide.
Date: March 16, 1959
Partner: UNT Libraries Government Documents Department
open access

RAYPAC : a Special-Purpose Analog Computer

Description: As an aid in forecasting possible blast damage in areas distant from a bomb burst point, a special-purpose electronic analog computer has been developed. Sound ray paths (orthogonal trajectories to sound wave front) are computed as a function of meteorological conditions.
Date: March 24, 1955
Creator: Durham, H. B.
Partner: UNT Libraries Government Documents Department
open access

A Study of the Mechanisms of Heat Treatment of Zirconium-Base Alloys : Status Report, July 1, 1955 - February 29, 1956

Description: The kinetics of transformation of zirconium binary alloys is being pursued. Mechanical property variation as a function of transformation if also being investigated. Zirconium-tin and zirconium-titanium alloys transform very rapidly when quenched from the beta field. These alloys have, generally speaking, been demonstrated to be not amenable to heat treatment in the normal sense of the word. Eutectoid alloys, principally zirconium-molybdenum alloys, have shown a definite response to heat treatm… more
Date: March 15, 1956
Creator: Domagala, R. F. & Levinson, David W.
Partner: UNT Libraries Government Documents Department
open access

Liquid Metal Level Instrument

Description: Theory of operation and test results are given for a resistance type of liquid metal level instrument. The voltage across a steel rod in the tank is amplified by a magnetic amplifier and indicated by a milliammeter. Temperature compensation is provided for tank temperatures up to 1000 F.
Date: March 18, 1952
Creator: Robinson, H.; Dows, L. H. & Droms, C. R.
Partner: UNT Libraries Government Documents Department
open access

Chemical Development Section C Progress Report for October-November 1960

Description: Studies are being made on the recovery of thorium (and uranium) from granitic rock, since this source represents a very large potential thorium reserve for the nuclear power industry. In preliminary leaching studies on 16 granite samples (containing 8-95 ppm thorium and 1.5-16 ppm uranium), maximum recoveries of thorium and uranium ranged 30-85% and 15-65% respectively, and sulfuric acid consumption was high (30-120 lbs H2SO4 per ton of granite). A relatively high acidity was needed to obtain r… more
Date: March 3, 1961
Creator: Brown, K. B.
Partner: UNT Libraries Government Documents Department
open access

The Lindemann and Grüneisen Laws

Description: The Lindemann assumption of direct contact of neighboring atoms at fusion is replaced by the criterion that melting occurs when the root-mean-square amplitude of thermal vibration reaches a critical fraction ρ, presumed the same for all isotropic monatomic solids, of the distance of separation of nearest-neighbor atoms. The Debye-Waller theory of the temperature dependence of the intensity of Bragg reflection of x-rays is used, without further assumptions, to derive a generalized Lindemann law… more
Date: March 23, 1955
Creator: Gilvarry, J. J. (John James), |1917-
Partner: UNT Libraries Government Documents Department
open access

Gas Plated Coatings on Metals and Alloys : Progress Report No. 1

Description: The object of this project is to conduct studies on the coating of metals and alloys by the gas plating process. Coatings to be studied consist of chromium on copper; alloys of nickel chromium on copper; molybdenum on stainless steel and Inconel; chromium on stainless steel and Inconel; and tungsten and molybdenum and their carbides on stainless steel and Inconel.
Date: March 11, 1953
Creator: Nack, Herman & Whitacre, John R.
Partner: UNT Libraries Government Documents Department
open access

Effects of Heat Treatment on Microstructure and Fabricability of 48 wt % Uranium - 52 wt % Aluminum Alloys

Description: It has been reported in the literature that prolonged soaking of 16 wt & uranium-aluminum alloys at elevated temperatures induces a microstructural changed termed "conglobulation". this process is essentially a spheroidization of the UAl4 eutectic. Conclusions of the tests: (1) Extended soaking of 48 wt $ uranium-aluminum alloy billets at 600 C does not improve their hot-rolling characteristics. (2) Soaking periods of 50 hours and greater reduce the tensile and yield strengths of these alloys.… more
Date: March 15, 1957
Creator: Thurber, William C.
Partner: UNT Libraries Government Documents Department
open access

Radiation Dose Received by Passengers and Crew on Planes Carrying the Maximum Number of Radiation Units

Description: The dose of ionizing radiation received by passengers and crew members traveling on commercial airlines which transport radioisotopes is of interest to all persons who travel the airways frequently. Tariff regulations permit the air transport of 40 units of radioactive materials where one unit represents a quantity of radioisotopes which when packaged delivers a dose rate of one mr/hr at a distance of one meter from the center of the package. Using five different types of commercial aircraft, s… more
Date: March 1, 1957
Creator: Davis, D. M.; Hart, J. C. & Warden, A. D.
Partner: UNT Libraries Government Documents Department
open access

Anisotropic Elastic Scattering of Neutrons

Description: In an elastic collision the neutron loses part of its kinetic energy to the nucleus with both the kinetic and momentum of the system being conserved. However, for many elements the scattering is not isotropic in the center-of-mass system at the higher neutron energies. Many of the present reactor multigroup codes include anisotropic scattering at the high neutron energies, while many others assume isotropic scattering at all energies. In order to consider some of the effects of including anisot… more
Date: March 21, 1957
Creator: Copenhaver, C. M.
Partner: UNT Libraries Government Documents Department
open access

Compatibility Tests of Various Materials in Molten Sodium

Description: Several compatibility test of various materials in contact in sodium under 500 psi pressure were conducted for 716 hr at 1500 F. Of the diffusion couples studies, the Inconel-beryllium system showed the largest amount al alloying. The reaction between molybdenum and beryllium resulted in the formation of two compounds, both of which were severely cracked in several areas. The molybdenum-INOR #8, and the INOR #8p type 316 stainless steel interfaces showed little if any alloying.
Date: March 25, 1957
Creator: Carlander, R. & Hoffman, E. E.
Partner: UNT Libraries Government Documents Department
open access

Source of Fission Products in LITR Cooling Water

Description: A study has been made of the radioactive nuclides present in the cooling water of the Low Intensity Test Reactor. Prominent nuclides which have been identified include Np239 and certain fission products. The experimental evidence points to the probability that there could be adequate U235 contamination on the fuel plates to quantitatively account for the fission products identified in the LITR cooling water. inasmuch as new aluminum does not contain uranium, it must be assumed that the contamin… more
Date: March 26, 1957
Creator: Moeller, D. W. (Dade W.) & Leddicotte, G. W.
Partner: UNT Libraries Government Documents Department
open access

In-Reactor Autoclave Corrosion Studies. II, Autoclave Z18

Description: In order to test the effect of chromate ion on the corrosion of Zircaloy-2, a 0.04 m uranyl sulfate solution (enriched) containing added acid, copper sulfate and 557 ppm of Cr (VI) was autoclaved with rocking at 280 degrees C for about eight days in the HB-5 facility of the LITR. The average corrosion rate established by the rate of consumption of oxygen was 9.9 mpy at a power density of 4.9 w/ml. It is indicated by comparison with a previous corrosion study under LITR radiation that the presen… more
Date: March 22, 1957
Creator: Warren, K. S.; Davis, R. J. & Jenks, G. H. (Glenn Herbert), 1916-
Partner: UNT Libraries Government Documents Department
open access

Beryllium

Description: The information concerning beryllium assembled herein has been selected primarily to provide information that might be pertinent to the design of the ART. The creep-rupture data in the literature have been obtained from vacuum cast and extruded beryllium, rather than from the hot-pressed beryllium which will be used in the ART. A research program is being conducted by the Brush Beryllium Company, under contract to the Oak Ridge National Laboratory, which will eventually provide the design engi… more
Date: March 21, 1957
Creator: Whitman, M. J.
Partner: UNT Libraries Government Documents Department
open access

Measurement of the Friction Characteristics for Flow in the ART Fuel-to-NaK Heat Exchanger

Description: The friction characteristics of a full-scale straight-tube model of the ART fuel-to-NaK heat exchanger were determined experimentally. The presence of the spacers resulted in a transition to semi-turbulent flow at a Reynolds modulus of 350. this semi-turbulent flow persisted up to a Reynolds modulus of 5,000. The circumferential spacers were found to contribute slightly more than the radial spacers to the pressure loss in the heat exchanger.
Date: March 19, 1957
Creator: Cohen, S. I. & Jones, T. N.
Partner: UNT Libraries Government Documents Department
open access

TBP Stripping in Bubble-Cap Column and Concomitant Product Evaporation

Description: A study was conducted to demonstrate the stripping and evaporation steps in a Purex-type uranium recovery process and to ascertain the operating behavior of the equipment under a range of conditions. The factors considered were control, effectiveness, and reliability of equipment and optimum feed point. Experimental procedures are described, and recommendations for equipment modifications are included. (J.R.D.)
Date: March 18, 1957
Creator: Long, J. T.
Partner: UNT Libraries Government Documents Department
open access

Comments on the Determination of the Particle Size Distribution of Thorium Oxide

Description: Factors affecting the results of thoria particle size distribution measurements by sedimentation procedures currently and recently employed are considered. The effects of thoria concentration, solvent, dispersant, thoria properties, and other factors are discussed.
Date: March 31, 1957
Creator: Moore, G. E.
Partner: UNT Libraries Government Documents Department
open access

High-Temperature Properties in Relation to Design

Description: The essential physical and mechanical properties of materials which enter into the design considerations of high-temperature systems have been outlined, and the relationship of these factors to the detailed design of structural members noted. Particular attention is given to the phenomenon of strain-cycling and relaxation, and several engineering devices wherein these effects can markedly influence design are mentioned. Techniques and apparatus for the measurement of strain-cycling and relaxati… more
Date: March 14, 1957
Creator: Weir, J. R.; Meghreblian, Robert V. (Robert Vartan) & Douglas, D. A.
Partner: UNT Libraries Government Documents Department
open access

In-Pile Slurry Loop Program

Description: The in-plie slurry loop work is now being considered as a joint program between the PAR project and ORNL. It is proposed that PAR design, fabricate and test the in-pile loops and that ORNL operate the loops in-pile, dismantle the loops after irradiation and made the appropriate measurements to determine the radiation effects. This report gives the objects of the slurry in-pile program and outlines the facilities and operations required to execute ORNL's part of this program.
Date: March 8, 1957
Creator: Arehart, T. A.; Compere, E. L. (Edgar L.); Ferguson, D. E.; Korsmeyer, R. B. & McBride, J. P.
Partner: UNT Libraries Government Documents Department
open access

Neutron and Gamma-Ray Attenuation for a Fission Source in Water : Comparison of Theory with LTSF Measurements

Description: Calculations are presented of the fast neutron dose rate, the gamma-ray dose rate, and the thermal neutron flux along the source plate axis in the Lid Tank with the tank filled entirely with water. These calculations are compared with experimental measurements. The calculations are absolute and are compared with absolute measurements.
Date: March 12, 1957
Creator: Otis, David Ridgway
Partner: UNT Libraries Government Documents Department
open access

Volatility Pilot Plant : Design of a NaF Packed Tower for Removing HF from Fluorine

Description: A 4-ft-7-in. adsorption column packed with 1/8 in. sodium fluoride pellets was designed to reduce the hydrogen fluoride content of the fluorine being used by the Volatility Pilot Plant from 5% to less than 0.01%. It will be a non-isothermal packed bed with the bas inlet heated to 100 C to avoid plugging and the exit cooed to 25 C for more complete HF removal.
Date: March 7, 1957
Creator: Watson, J. S.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen