Technical Report Archive and Image Library (TRAIL) - Browse

ABOUT BROWSE FEED

Accurate calculation of multispar cantilever and semicantilever wings with parallel webs under direct and indirect loading

Description: In the present report the computation is actually carried through for the case of parallel spars of equal resistance in bending without direct loading, including plotting of the influence lines; for other cases the method of calculation is explained. The development of large size airplanes can be speeded up by accurate methods of calculation such as this.
Date: March 1932
Creator: Sanger, Eugen
Item Type: Report
Partner: UNT Libraries Government Documents Department

The aerodynamic characteristics of a model wing having a split flap deflected downward and moved to the rear

Description: Tests were made on a model wing with three different sized split trailing-edged flaps, in the NACA 7 by 10 foot wind tunnel. The flaps were formed of the lower rear portion of the wing and were rotated downward about axes at their front edges. The lift, drag, and center of pressure were measured with the axis in its original position and also with it moved back in even steps to the trailing edge of the main wing, giving in effect an increase in area. The split flaps when deflected about their original axis locations gave slightly higher maximum lift coefficients than conventional trailing-edge flaps, and the lift coefficients were increased still further by moving the axes toward the rear. The highest value of C(sub L max), which was obtained with the largest flap hinged at 90 per cent of the chord from the leading edge, was 2.52 as compared with 1.27 for the basic wing.
Date: May 1932
Creator: Weick, Fred E. & Harris, Thomas E.
Item Type: Report
Partner: UNT Libraries Government Documents Department

The aerodynamic characteristics of a slotted Clark y wing as affected by the auxiliary airfoil position

Description: Aerodynamic force tests on a slotted Clark Y wing were conducted in a vertical wind tunnel to determine the best position for a given auxiliary airfoil with respect to the main wing. A systematic series of 100 changes in location of the auxiliary airfoil were made to cover all the probable useful ranges of slot gap, slot width, and slot depth. The results of the investigation may be applied to the design of automatic or controlled slots on wings with geometric characteristics similar to the wing tested. The best positions of the auxiliary airfoil were covered by the range of the tests, and the position for desired aerodynamic characteristics may easily be obtained from charts prepared especially for the purpose.
Date: 1932~
Creator: Wenzinger, Carl J. & Shortal, Joseph A.
Item Type: Report
Partner: UNT Libraries Government Documents Department

The aerodynamic characteristics of airfoils at negative angles of attack

Description: A number of airfoils, including 14 commonly used airfoils and 10 NACA airfoils, were tested through the negative angle-of-attack range in the NACA variable-density wind tunnel at a Reynolds Number of approximately 3,000,000. The tests were made to supply data to serve as a basis for the structural design of airplanes in the inverted flight condition. In order to make the results immediately available for this purpose they are presented herein in preliminary form, together with results of previous tests of the airfoils at positive angles of attack. An analysis of the results made to find the variation of the ratio of the maximum negative lift coefficient to the maximum positive lift coefficient led to the following conclusions: 1) For airfoils of a given thickness, the ratio -C(sub L max) / +C(sub L max) tends to decrease as the mean camber is increased. 2) For airfoils of a given mean camber, the ratio -C(sub L max) / +C(sub L max) tends to increase as the thickness increases.
Date: 1932~
Creator: Anderson, Raymond F
Item Type: Report
Partner: UNT Libraries Government Documents Department

Aerodynamic characteristics of circular-arc airfoils at high speeds

Description: The aerodynamic characteristics of eight circular-arc airfoils at speeds of 0.5, 0.8, 0.95, and 1.08 times the speed of sound have been determined in an open-jet air stream 2 inches in diameter, using models of 1-inch chord. The lower surface of each airfoil was plane; the upper surface was cylindrical. As compared with the measurements described in NACA-TR-319, the circular-arc airfoils at speeds of 0.95 and 1.08 times the speed of sound are more efficient than airfoils of the R. A. F. or Clark Y families. At a speed of 0.5 times the speed of sound, the thick circular-arc sections are extremely inefficient, but thin sections compare favorably with those of the R. A. F. family. A moderate round of the sharp edges changes the characteristics very little and is in many instances beneficial. The results indicate that the section of the blades of propellers intended for use at high tip-speeds should be of the circular-arc form for the outer part of the blade and should be changed gradually to the R. A. F. or Clark Y form as the hub is approached.
Date: 1932~
Creator: Briggs, L. J. & Dryden, H. L.
Item Type: Report
Partner: UNT Libraries Government Documents Department

The aerodynamic characteristics of eight very thick airfoils from tests in the variable density wind tunnel

Description: Report presents the results of wind tunnel tests on a group of eight very thick airfoils having sections of the same thickness as those used near the roots of tapered airfoils. The tests were made to study certain discontinuities in the characteristic curves that have been obtained from previous tests of these airfoils, and to compare the characteristics of the different sections at values of the Reynolds number comparable with those attained in flight. The discontinuities were found to disappear as the Reynolds number was increased. The results obtained from the large-scale airfoil, a symmetrical airfoil having a thickness ratio of 21 per cent, has the best general characteristics.
Date: 1932~
Creator: Jacobs, Eastman N.
Item Type: Report
Partner: UNT Libraries Government Documents Department

The aerodynamic safety of airplanes

Description: This report presents several hypotheses regarding airplane safety, mainly concerning the nondimensional coefficient of air, speed, acceleration, and wing area on aerodynamic considerations of safety.
Date: September 1932
Creator: Kahn, Louis
Item Type: Report
Partner: UNT Libraries Government Documents Department

Airfoil section characteristics as affected by protuberances

Description: The drag and interference caused by protuberance from the surface of an airfoil have been determined in the NACA variable-density wind tunnel at a Reynolds number approximately 3,100,000. The effects of variations of the fore-and-aft position, height, and shape of the protuberance were measured by determining how the airfoil section characteristics were affected by the addition of the various protuberances extending along the entire span of the airfoil. The results provide fundamental data on which to base the prediction of the effects of actual short-span protuberances. The data may also be applied to the design of air brakes and spoilers.
Date: July 11, 1932
Creator: Jacobs, Eastman N.
Item Type: Report
Partner: UNT Libraries Government Documents Department

Airplane flight in the stratosphere

Description: This brief survey of the problems encountered in high-altitude flight deals in particular with the need for high lift coefficient in the wings, large aspect ratios in the wings, and also the problem of hermetically sealing the cabin.
Date: February 1932
Creator: De Caria, Ugo
Item Type: Report
Partner: UNT Libraries Government Documents Department

Airplane stability in taxying

Description: The stability analysis of an airplane while rolling is much more simplified to the extent that it can be obtained for numerical data which can be put to practical use in the design of landing gear dimensions. Every landing gear type attains to a critical ground friction coefficient that decides the beginning of instability, i.e., nosing over. This study has, in addition, a certain interest for the use of wheel brakes.
Date: September 1, 1932
Creator: Anderlik, E
Item Type: Report
Partner: UNT Libraries Government Documents Department

Application of the theory of free jets

Description: Based upon Kirchoff's theory of free jets the flow through different screen arrangements of flat plates, as chiefly encountered with turbines in the cavitation zone is defined. It is shown by experiments that these theoretical results are very well representative in most cases of the conditions of discharge from water in air and consequently by cavitation. In addition, the experiments reveal a picture of the discrepancies between the actual flow and the theory of discharge of air in air (of water in water without cavitation). These discrepancies are explained qualitatively by the mingling processes between the jets and the dead air zones.
Date: April 1932
Creator: Betz, A & Petersohn, E
Item Type: Report
Partner: UNT Libraries Government Documents Department

Approximate calculation of multispar cantilever and semicantilever wings with parallel ribs under direct and indirect loading

Description: A method is presented for approximate static calculation, which is based on the customary assumption of rigid ribs, while taking into account the systematic errors in the calculation results due to this arbitrary assumption. The procedure is given in greater detail for semicantilever and cantilever wings with polygonal spar plan form and for wings under direct loading only. The last example illustrates the advantages of the use of influence lines for such wing structures and their practical interpretation.
Date: August 1932
Creator: Sanger, Eugen
Item Type: Report
Partner: UNT Libraries Government Documents Department

The Ashland Coal Field, Rosebud, Powder River, and Custer Counties, Montana

Description: From introduction: The detailed information concerning the coal deposits of the Ashland field set forth in this report has been obtained in the course of an investigation that has been conducted both as a part of the United States Geological Survey's general systematic study of western coal lands and as an aid in the administration of the public lands. With the information obtained on the location of outcrops, the number, distribution, and thickness of coal beds, the accessibility of the coal, and the thickness of the overburden, the public lands of the region are classified as to their coal value; coal-bearing lands are differentiated from noncoal-bearing lands; and the administration of the coal-land leasing law is facilitated.
Date: 1932
Creator: Bass, N. Wood
Item Type: Report
Partner: UNT Libraries Government Documents Department

Automatic stability of airplanes

Description: It is endeavored in this report to give a full outline of the problem of airplane stability and to classify the proposed solutions systematically. Longitudinal stability, which can be studied separately, is considered first. The combination of lateral and directional stabilities, which cannot be separated, will be dealt with later.
Date: December 1932
Creator: Haus, FR
Item Type: Report
Partner: UNT Libraries Government Documents Department

The automotive ignition coil

Description: This report gives the results of a series of measurements on the secondary voltage induced in an ignition coil of typical construction under a variety of operating conditions. These results show that the theoretical predictions hitherto made as to the behavior of this type of apparatus are in satisfactory agreement with the observed facts. The large mass of data obtained is here published both for the use of other investigators who may wish to compare them with other theoretical predictions and for the use of automotive engineers who will here find definite experimental results showing the effect of secondary capacity and resistance on the crest voltage produced by ignition apparatus.
Date: 1932?~
Creator: Darnell, T. H.
Item Type: Report
Partner: UNT Libraries Government Documents Department