Technical Report Archive and Image Library (TRAIL) - 2,226 Matching Results

Search Results

Abnormal grain growth in M-252 and S-816 alloys

Description: Report discussing an experimental investigation was carried out on air- and vacuum-melted M-252 and S-816 alloys to find conditions of heating and hot-working which resulted in abnormal grain growth. The experiments were mainly limited to normal conditions of heating for hot-working and heat treatment and normal temperatures of solution treatment were used to allow grain growth after susceptibility to abnormal grain growth was developed by various experimental conditions. Results indicated that small reductions of essentially strain-free metal were the basic cause of such grain growth.
Date: November 1957
Creator: Decker, R F; Rush, A I; Dano, A G & Freeman, J W
Partner: UNT Libraries Government Documents Department

Abnormal grain growth in nickel-base heat-resistant alloys

Description: From Introduction: "The data included in this report for Nimonic 80A alloy, for instance, represent experiments carried out to help clarify a production problem of grain-size control in an alloy which has been extensively used. The general procedure of the investigation was to carry out controlled laboratory experiments on samples of bar stock to find conditions of heating and hot-working which resulted in abnormal grain growth."
Date: December 1957
Creator: Decker, R F; Rush, A I; Dano, A G & Freeman, A G
Partner: UNT Libraries Government Documents Department

Abnormal grain growth in S-816 alloy

Description: From Introduction: "This report presents the results obtained to date of an investigation to establish the fundamental causes of abnormal growth in S-816 alloy under conditions encountered during the forging of blades for the gas turbine of jet engines."
Date: April 1952
Creator: Rush, A I; Freeman, J W & White, A E
Partner: UNT Libraries Government Documents Department

Accelerations and passenger harness loads measured in full-scale light-airplane crashes

Description: From Introduction: "Light-airplane accident data, compiled by Crash Injury Research of Cornell University Medical College, indicate that human beings have often withstood declarations in excess of those imposed in airplane crashes involving extensive damage to the airplane structure (ref. 1). This study also correlates the extent of damage to the airplane structure with the injury incurred by the occupants during crash accidents."
Date: August 1953
Creator: Eiband, A Martin; Simpkinson, Scott H & Black, Dugald O
Partner: UNT Libraries Government Documents Department

Accelerations in transport-airplane crashes

Description: From Introduction: "A study of crash-impact survival in light airplanes is reported in references 1 and 2. A similar study for fighter airplanes is reported in reference 3. This report discusses crash-impact survival in transport airplanes."
Date: February 1958
Creator: Preston, G Merritt & Pesman, Gerard J
Partner: UNT Libraries Government Documents Department

An accurate and rapid method for the design of supersonic nozzles

Description: From Introduction: "This report presents a computational procedure which provides for the rapid and accurate calculation of any streamline in a series of special flows. Detailed information is given on the boundary conditions and equations used for computing the characteristic nets and stream function."
Date: February 1955
Creator: Beckwith, Ivan E & Moore, John A
Partner: UNT Libraries Government Documents Department

Acoustic analysis of ram-jet buzz

Description: From Introduction: "The surging of a system containing a centrifugal- or axial-flow compressor (e.g., refs. 1 to 4) is an example of self-sustained oscillation. Inlets designed for supersonic jet engines also have been observed to induce oscillations (e.g., refs. 5 to 11) which are usually referred to as "buzz." The origin of buzz in ram-jet engines is the subject of the present report."
Date: November 1955
Creator: Mirels, Harold
Partner: UNT Libraries Government Documents Department

Acoustic radiation from two-dimensional rectangular cutouts in aerodynamic surfaces

Description: From Introduction: "The experiments in high-speed flow showed that an intense, high-frequency acoustic radiation is an essential feature of the problem. Consequently, a study of the acoustic field (involving schlieren observations and frequency and intensity measurements) was undertaken. This report presents the salient features of the study, which was mainly exploratory."
Date: August 1955
Creator: Krishnamurty, K
Partner: UNT Libraries Government Documents Department

Acoustic, thrust, and drag characteristics of several full-scale noise suppressors for turbojet engines

Description: From Introduction: " Considerable analytical and experimental research has been done to find means of reducing the noise levels of the turbojet transports. Noise levels can be decreased by engine redesign to reduce the jet-exit velocity (ref. 1), proper flight-climb techniques (ref. 2), and the use of noise-suppression exhaust nozzles (refs. 3 to 5). The present report is concerned with the last method."
Date: April 1958
Creator: Ciepluch, Carl C; North, Warren J; Coles, Willard D & Antl, Robert J
Partner: UNT Libraries Government Documents Department

Acoustical treatment for the NACA 8- by 6-foot supersonic propulsion wind tunnel

Description: From Introduction: "This report presents results of a research and engineering program performed during the first half of 1950 that resulted in an acoustical treatment for the 8- by 6-foot supersonic wind tunnel at the Lewis Flight Propulsion Laboratory."
Date: June 1955
Creator: Beranek, Leo L; Labate, Samuel & Ingard, Uno
Partner: UNT Libraries Government Documents Department

Additional static and fatigue tests of high-strength aluminum-alloy bolted joints

Description: From Introduction: "Early in 1951 the National Advisory Committee for Aeronautics published, as Technical Note 2276 (ref. 1), a report by the Aluminum Research Laboratories of the Aluminum Company of America on the results of static and fatigue tests of high-strength aluminum alloy monobloc specimens and bolted joints. In view of special interest shown by several aircraft companies, certain expansions of the test program were undertaken by the Aluminum Research Laboratories and are reported herein."
Date: July 1954
Creator: Hartmann, E C; Holt, Marshall & Eaton, I D
Partner: UNT Libraries Government Documents Department

Aerodynamic characteristics and flying qualities of a tailless triangular-wing airplane configuration as obtained from flights of rocket-propelled models at transonic and supersonic speeds

Description: Report discussing a flight investigation of rocket-powered models of a tailless triangular-wing airplane configuration was made through the transonic and low supersonic speed range at the Langley Pilotless Aircraft Research Station at Wallops Island, Va. An analysis of the aerodynamic coefficients, stability derivatives, and flying qualities based on the results obtained from the successful flight tests of three models is presented.
Date: November 1956
Creator: Mitcham, Grady L; Stevens, Joseph E & Norris, Harry P
Partner: UNT Libraries Government Documents Department

Aerodynamic characteristics of a circular cylinder at Mach number 6.86 and angles of attack up to 90 degrees

Description: Pressure-distribution and force tests of a circular cylinder have been made in the Langley 11-inch hypersonic tunnel at a Mach number of 6.88, a Reynolds number of 129,000, and angles of attack up to 90 degrees. The results are compared with the hypersonic approximation of Grimminger, Williams, and Young and a simple modification of the Newtonian flow theory. An evaluation of the crossflow theory is made through comparison of present results with available crossflow Mach number drag coefficients.
Date: January 1957
Creator: Penland, Jim A
Partner: UNT Libraries Government Documents Department

Aerodynamic characteristics of a refined deep-step planing-tail flying-boat hull with various forebody and afterbody shapes

Description: From Introduction: "The results of one phase of this investigation, presented in reference 1, have indicated that hull drag can be reduced without causing large changes in aerodynamic stability and hydrodynamic performance by the use of high length-beam ratios. Another phase of the investigation, reference 2, indicated that hulls of the deep-step planning-tail type have much lower air drag than the conventional type of hull and about the same aerodynamic stability; tank tests, reference 3, have indicated that this type of hull also has hydrodynamic performance equal to and in some respects superior to the conventional type of hull. Unpublished tank tests have indicated that the hull models presented in the present paper (with the possible exception of the forebody alone for which data are not available) will have acceptable hydrodynamic performance."
Date: June 1952
Creator: Riebe, John M & Naeseth, Rodger L
Partner: UNT Libraries Government Documents Department

Aerodynamic characteristics of a two-blade NACA 10-(3)(062)-045 propeller and of a two-blade NACA 10-(3)(08)-045 propeller

Description: Report discussing characteristics are given for the two-blade NACA 10-(3)(062)-045 propeller and for the two-blade NACA 10-(3)(08)-045 propeller over a range of advance ratio from 0.5 to 3.8, through a blade-angle range from 20 degrees to 55 degrees measured at the 0.75 radius. Maximum efficiencies of the order of 91.5 to 92 percent were obtained for the propellers. The propeller with the thinner airfoil sections over the outboard portion of the blades, the NACA 10-(3)(062)-045 propeller, had lower losses at high tip speeds, the difference amounting to about 5 percent at a helical tip Mach number of 1.10.
Date: January 1953
Creator: Solomon, William
Partner: UNT Libraries Government Documents Department

Aerodynamic characteristics of damping screens

Description: From Summary: "The experimental investigation of damping screens described herein was undertaken primarily to test theories of the effects of damping screens and to obtain information on the performance of screens in oblique flow. The characteristics investigated include the damping of longitudinal and lateral components of turbulence, the effect of screens on scale, the conditions for the production of turbulence and eddies by screens, and the damping of spatial variations of mean speed."
Date: January 1950
Creator: Schubauer, G B; Spangenberg, W G & Klebanoff, P S
Partner: UNT Libraries Government Documents Department