Technical Report Archive & Image Library (TRAIL) - 1,326 Matching Results

Search Results

prev Results: 97 - 120 next
open access

A balanced-pressure sliding seal used for transfer of pressurized air between stationary and rotating parts

Description: A combination sliding-ring and pressure-balancing seal capable of transferring pressurize air from stationary to rotating parts was developed and experimentally investigated at sliding velocities and cooling-air pressures up to 10,000 feet per minute and 38.3 pounds per square inch absolute, respectively. Leakage of cooling air was completely eliminated with an expenditure of balance air less than one-fourth the leakage loss of air from labyrinth seals under the same conditions. Additional cool… more
Date: January 9, 1957
Creator: Curren, Arthur N. & Cochran, Reeves P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Base pressure at supersonic speeds on two-dimensional airfoils and on bodies of revolution with and without fins having turbulent boundary layers

Description: From Summary: "An analysis has been made of available experimental data to show the effects of most of the variables that are more predominant in determining base pressure at supersonic speeds. The analysis covers base pressures for two-dimensional airfoils and for bodies of revolution with and without stabilizing fins and is restricted to turbulent boundary layers. The present status of available experimental information is summarized as are the existing methods for predicting base pressure."
Date: January 1957
Creator: Love, Eugene S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Basic considerations in the combustion of hydrocarbon fuels with air

Description: Basic combustion research is collected, collated, and interpreted as it applies to flight propulsion. The following fundamental processes are treated in separate chapters: atomization and evaporation of liquid fuels, flow and mixing processes in combustion chambers, ignition and flammability of hydrocarbon fuels, laminar flame propagation, turbulent flames, flame stabilization, diffusion flames, oscillations in combustors, and smoke and coke formation in the combustion of hydrocarbon-air mixtur… more
Date: 1957
Creator: Barnett, Henry C. & Hibbard, Robert R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Basic performance characteristics of several subsonic-diffuser-bypass-duct combinations for use with supersonic inlets

Description: Report presenting the basic performance characteristics of several types of designs of subsonic-diffuser-bypass-duct combinations for bypass flows up to one-third of the total flow. The tested bypass-duct design procedure was found to be greatly oversimplified and was unable to produce satisfactory performance because of the extreme adverse pressure gradient.
Date: January 21, 1957
Creator: Wood, Charles C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Beehive and Hornet : Reactor Codes for Spherical Geometry

Description: Abstract: Beehive is a five energy group, two region, time independent spherical reactor code. It considers the problem of reactor system in which the core material is assumed to be at a higher energy (temperature) than the reflector material. The code obtains a closed solution for the critical reactor assembly by a procedure which is a logical extension of normal two group theory. The companion code, Hornet, computes the neutron fluxes for the critical assembly determined by the Beehive calcul… more
Date: February 8, 1957
Creator: Stone, Stuart P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Bellows Failure in Solids Separation Loop of the HRT Mockup

Description: The failure of the valve bellows would appear to be due to a combination of stress corrosion and crevice corrosion. Stress corrosion occurred as evidenced by the transgranular branched cracking found in the bellows and in the base which which was joined to the bellows. It seems probable that chlorides were present, which, along with the residual stresses present in the bellows assembly, created the necessary conditions for stress corrosion to occur. Crevice corrosion occurred probably due to he… more
Date: February 5, 1957
Creator: Kegler, T. M., Jr. & Hammond, J. P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Beneficiation of Iron-Copper Ores from Kasaan Peninsula, Prince of Wales Island, Alaska

Description: Report issued by the Bureau of Mines over studies conducted on the beneficiation of iron-copper ores. As stated in the summary, "this report summarizes the results of laboratory testing of copper-bearing magnetite ore from the Poorman, Rush and Brown, and Copper Center deposits, Kasaan Peninsula, Prince of Wales Island, southeastern Alaska" (p. 1). This report includes tables, maps, and illustrations.
Date: February 1957
Creator: Wells, R. R.; Erspamer, E. G. & Sterling, F. T.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Beryl Resources of New Hampshire

Description: From Introduction: "The primary purpose of this work was to summarize and bring up to date the information on beryl resources as gained from investigations during 1942-45, to examine in detail certain beryl-bearing pegmatites discovered and developed in recent years, and to study other pegmatites and groups of pegmatites known or suspected to contain beryl."
Date: December 1957
Creator: Page, James J. & Larrabee, David M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Beryllium

Description: The information concerning beryllium assembled herein has been selected primarily to provide information that might be pertinent to the design of the ART. The creep-rupture data in the literature have been obtained from vacuum cast and extruded beryllium, rather than from the hot-pressed beryllium which will be used in the ART. A research program is being conducted by the Brush Beryllium Company, under contract to the Oak Ridge National Laboratory, which will eventually provide the design engi… more
Date: March 21, 1957
Creator: Whitman, M. J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Beryllium-oxide : [bibliography]

Description: "This is a bibliography of journal articles relating to beryllium oxide. Sources consulted include; Chemical Abstracts, 1951-1955; Physics Abstracts, 1951-1955; Industrial Arts Index, 1955-Jan, 1957; and the library card catalog. Starred articles are available in the library.
Date: March 22, 1957
Creator: Cason, Maggie
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Beta and Gamma Dose Rates From Terrestrially Distributed Sources

Description: Report that examines the dose rate of radiation in the air and in a test subject due to radioactive materials (uranium, thorium, and potassium) that are present in the ground. The test subject in these experiments is a water cylinder that is meant to receive radiation in a manner similar to a person.
Date: October 28, 1957
Creator: O'Brien, Keran; Lowder, Wayne M. & Solon, Leonard R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Bibliography

Description: From abstract: This bibliography consists of references pertaining to "Effects of Nuclear Radiation Upon Electronic and Electrical Components", and to "Electronic and Electrical Components for Critical Environments". References were compiled from the Classified and Unclassified report literature and the published literature. The following indexes and abstract journals were used: Weapons Data Index, AEC Card Catalog, Engineering Index (1950-55), and Office of Technical Services, Research Reports… more
Date: April 30, 1957
Creator: Frost, Frederick E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Blow-Out Velocities of Solutions of Hydrocarbons and Boron Hydride - Hydrocarbon Reaction Products in a 1 7/8-Inch-Diameter Combustor

Description: Combustion blow-out velocities were determined for JP-4 solutions containing: (1) 10 % ethylene - decaborane reaction product, (2) 10% and 20% acetylene - diborane reaction product, and (3) 5.5%, 15.7%, and 30.7% methylacetylene - diborane reaction product. These were compared with blow-out velocities for JP-4, propylene oxide, and neohexane and previously reported data for JP-4 solutions of pentaborane. For those reaction products investigated, the blow-out velocities at a fixed equivalence ra… more
Date: October 24, 1957
Creator: Morris, James F. & Lord, Albert M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Bonded lead monoxide films as solid lubricants for temperatures up to 1250 degrees F

Description: Report presenting a friction, wear, and endurance-lift study made with bonded films of mixed oxides containing lead monoxide (PbO) as the main component. The coatings lubricated over the entire temperature range, but were far more effective from 500 to 1250 degrees Fahrenheit than at the lower temperatures. Results regarding the effect of silica additions on coating formation, determination of coating composition, effect of coating thickness on friction and wear, effect of temperature on fricti… more
Date: May 7, 1957
Creator: Sliney, Harold E. & Johnson, Robert L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Booby Traps

Description: The following report provides data taken of problematic situations that have led to accidental prompt-critical radiation bursts in critical assemblies laboratories, as well as a few risky instances. The purpose of this report is to prevent these mistakes from happening in the future.
Date: June 12, 1957
Creator: Paxton, Hugh Campbell
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Boundary-Layer-Transition and Heat-Transfer Measurements from Flight Tests of Blunt and Sharp 50 Degree Cones at Mach Numbers from 1.7 to 4.7

Description: Boundary-layer-transition and heat-transfer measurements were obtained from flight tests of blunt and sharp cones having apex angles of 50 deg. The test Mach number range was from 1.7 to 4.7, corresponding to free-stream Reynolds numbers, based on cone base diameter, of 18. 3 x 10(exp 6) and 32.1 x 10(exp 6), respectively. Transition on both models occurred at a local Reynolds number of 1 x 10(exp 6) to 2 X 10(exp 6) based on distance from the stagnation point. Transition Reynolds numbers base… more
Date: April 18, 1957
Creator: Chauvin, Leo T. & Speegle, Katherine C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Boundary-layer transition at Mach 3.12 as affected by cooling and nose blunting

Description: Report presenting an investigation to determine the combined effects of nose blunting and cooling on boundary-layer transition. Data are presented for both sharp and blunted cone-cylinder and parabolic-nosed - cylinder bodies at a variety of Reynolds numbers. Results regarding the cone-cylinder model, parabolic-cylinder model, and transition reversal are provided.
Date: January 1957
Creator: Diaconis, N. S.; Jack, John R. & Wisniewski, Richard J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A Brief Analog Investigation of Inertia Coupling in Rolling Maneuvers of an Airplane Configuration Using a Variable-Incidence Wing as the Longitudinal Control

Description: "An analog computer study was made in order to investigate the inertia coupling in rolling maneuvers of an airplane configuration utilizing a variable-incidence wing for longitudinal control. A five-degree-of-freedom system of equations was used, and only one set of flight conditions was included in this study. The results, when compared to those for a conventional tail-control airplane, indicated significant advantages for the variable-incidence-wing type of control in reducing undesired dynam… more
Date: August 6, 1957
Creator: Gillis, Clarence L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Brief Studies of Turbojet Combustor and Fuel-System Operation With Hydrogen Fuel at -400 Degrees F

Description: Memorandum presenting a single J33 combustor and an experimental tubular combustor incorporating a fuel vaporizer as operated with gaseous hydrogen at temperatures slightly above the boiling point of the fuel. Data were obtained to explore possible effects of the fuel temperature on combustor performance and on the control and measurement of fuel flow.
Date: March 7, 1957
Creator: Straight, David M.; Smith, Arthur L. & Christenson, Harold H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen