Technical Report Archive & Image Library (TRAIL) - 1,423 Matching Results

Search Results

open access

The design of fins for air-cooled cylinders

Description: From Summary: "An analysis was made to determine the proportions of fins made of aluminum, copper, magnesium, and steel necessary to dissipate maximum quantities of heat for different fin widths, fin weights, and air-flow conditions. The analysis also concerns the determination of the optimum fin proportions when specified limits are placed on the fin dimensions. The calculation of the heat flow in the fins is based on experimentally verified, theoretical equations. The surface heat-transfer co… more
Date: June 28, 1939
Creator: Biermann, Arnold E. & Ellerbrock, Herman H., Jr.
Partner: UNT Libraries Government Documents Department
open access

Heat transfer from finned metal cylinders in an air stream

Description: This report presents the results of tests made to supply design information for the construction of metal fins for the cooling of heated cylindrical surfaces by an air stream. A method is given for determining fin dimensions for a maximum heat transfer with the expenditure of a given amount of material for a variety of conditions of air flow and metals.
Date: April 26, 1934
Creator: Biermann, Arnold E. & Pinkel, Benjamin
Partner: UNT Libraries Government Documents Department
open access

Propeller charts for the determination of the rotational speed for the maximum ratio of the propulsive efficiency to the specific fuel consumption

Description: A set of propeller operating efficiency charts, based on a coefficient from which the propeller rotational speed has been eliminated, is presented. These charts were prepared with data obtained from tests of full-size metal propellers in the NACA propeller-research tunnel. Working charts for nine propeller-body combinations are presented, including results from tests of dual-rotating propellers. These charts are to be used in the calculation of the range and the endurance of airplanes equipped … more
Date: December 11, 1940
Creator: Biermann, David & Conway, Robert N.
Partner: UNT Libraries Government Documents Department
open access

The aerodynamic characteristics of six full-scale propellers having different airfoil sections

Description: From Summary: "Wind-tunnel tests are reported of six 3-blade 10-foot propellers operated in front of a liquid-cooled engine nacelle. The propellers were identical except for blade airfoil sections, which were: Clark y, R.A.F. 6, NACA 4400, NACA 2400-34, NACA 2rsub200, and NACA 6400. The range of blade angles investigated extended for 15 degrees to 40 degrees for all propellers except the Clark y, for which it extended to 45 degrees. The results showed that the range in maximum efficiency betwee… more
Date: 1939
Creator: Biermann, David & Hartman, Edwin P.
Partner: UNT Libraries Government Documents Department
open access

The Effect of Compressibility on Eight Full-Scale Propellers Operating in the Take-Off and Climbing Range

Description: "Tests were made of eight full-scale propellers of different shape at various tip speeds up to about 1,000 feet per second. The range of blade-angle settings investigated was from 10 degrees to 30 degrees at the 0.75 radius. The results indicate that a loss in propulsive efficiency occurred at tip speeds from 0.5 to 0.7 the velocity of sound for the take-off and climbing conditions" (p. 517).
Date: May 18, 1938
Creator: Biermann, David & Hartman, Edwin P.
Partner: UNT Libraries Government Documents Department
open access

Tests of Five Full-Scale Propellers in the Presence of a Radial and a Liquid-Cooled Engine Nacelle, Including Tests of Two Spinners

Description: "Wind-tunnel tests are reported of five 3-blade 10-foot propellers operating in front of a radial and a liquid-cooled engine nacelle. The range of blade angles investigated extended from 15 degrees to 45 degrees. Two spinners were tested in conjunction with the liquid-cooled engine nacelle. Comparisons are made between propellers having different blade-shank shapes, blades of different thickness, and different airfoil sections" (p. 589).
Date: 1938
Creator: Biermann, David & Hartman, Edwin P.
Partner: UNT Libraries Government Documents Department
open access

Tests of Two Full-Scale Propellers With Different Pitch Distributions, at Blade Angles Up to 60 Degrees

Description: "Two 3-blade 10-foot propellers were operated in front of a liquid-cooled engine nacelle. The propellers differed only in pitch distribution; one had normal distribution (nearly constant pitch for a blade angle of 15 degrees at 0.75 radius), and the other had the pitch of the tip sections decreased with respect to that for the shank sections (blade angle of 35 degrees for nearly constant pitch distribution). Propeller blade angles at 0.75r from 15 degrees to sixty degrees, corresponding to desi… more
Date: April 14, 1938
Creator: Biermann, David & Hartman, Edwin P.
Partner: UNT Libraries Government Documents Department
open access

Wind-Tunnel Tests of Four- and Six-Blade Single- and Dual-Rotating Tractor Propellers

Description: "Test of 10-foot diameter, four and six blade single-rotating and dual-rotating propellers were conducted in the NACA propeller-research tunnel. The propellers were mounted at the front end of a streamline body incorporating spinners to house the hub portions. The effect of a symmetrical wing mounted in the slipstream ranged from 20 degrees to 65 degrees setting corresponds to airplane speeds greater than 500 miles per hour. The results indicate that dual-rotating propellers were from 0 to 6 pe… more
Date: July 13, 1942
Creator: Biermann, David & Hartman, Edwin P.
Partner: UNT Libraries Government Documents Department
open access

The drag of airplane wheels, wheel fairings, and landing gears 2: nonretractable and partly retractable landing gears

Description: This is the second report giving the results obtained in the NACA 20-foot wind tunnel on the drag due to landing gears. The present report gives the results of tests of nonretractable and partly retractable landing gears intended for heavier low-wing monoplanes of the transport and bomber type.
Date: June 21, 1934
Creator: Biermann, David & Herrnstein, William H., Jr.
Partner: UNT Libraries Government Documents Department
open access

The interference between struts in various combinations

Description: This report presents the results of wind tunnel tests made to determine the interference drag arising from various arrangements of streamline struts and round struts, or cylinders. Determinations were made of the interference drag of struts spaced side by side, struts in tandem, tandem struts encased in a single fairing, a strut intersecting a plane, and struts intersecting to form a v. Three sizes of struts were used for most of the tests. These tests show that the interference drag arising fr… more
Date: June 5, 1933
Creator: Biermann, David & Herrnstein, William H., Jr.
Partner: UNT Libraries Government Documents Department
open access

Some theoretical low-speed span loading characteristics of swept wings in roll and sideslip

Description: The Weissinger method for determining additional span loading for incompressible flow is used to find the damping in roll, the lateral center of pressure of the rolling for wing plan forms of various aspect ratios, taper ratios, and sweep angles. In addition, the applicability of the method to the determination of certain other aerodynamic derivatives is investigated, and corrections for the first-order effects of compressibility are indicated. The agreement obtained between experimentally and … more
Date: December 22, 1948
Creator: Bird, John D.
Partner: UNT Libraries Government Documents Department
open access

A study of the use of experimental stability derivatives in the calculation of the lateral disturbed motions of a swept-wing airplane and comparison with flight results

Description: An investigation was made to determine the accuracy with which the lateral flight motions of a swept-wing airplane could be predicted from experimental stability derivatives, determined in the 6-foot-diameter rolling-flow test section and 6 by 6-foot curved-flow test section of the Langley stability tunnel. In addition, determination of the significance of including the nonlinear aerodynamic effects of sideslip in the calculations of the motions was desired. All experimental aerodynamic data ne… more
Date: 1951
Creator: Bird, John D. & Jaquet, Byron M.
Partner: UNT Libraries Government Documents Department
open access

Some effects of frequency on the contribution of a vertical tail to the free aerodynamic damping of a model oscillating in yaw

Description: The damping in yaw and the directional stability of a model freely oscillating in yaw were measured tail-off and tail-on and compared with the values obtained by theoretical consideration of the unsteady lift associated with an oscillating vertical tail. A range of low frequencies comparable to those of the lateral motions of airplanes was covered. The analysis includes the effects of vertical-tail aspect ratio and the two-dimensional effects of compressibility.
Date: November 26, 1951
Creator: Bird, John D.; Fisher, Lewis R. & Hubbard, Sadie M.
Partner: UNT Libraries Government Documents Department
open access

Friction, wear, and surface damage of metals as affected by solid surface films

Description: "As predicted by friction theory, experiments showed that friction and surface damage of metals can be reduced by solid surface films. The ability of materials to form surface films that prevent welding was a very important factor in wear of dry and boundary lubricated surfaces. Films of graphitic carbon on cast irons, NiO on nickel alloys, and FeO and Fe(sub 3)O(sub 4) on ferrous materials were found to be beneficial. Abrasive films such as Fe(sub 2)O(sub 3) or MoO(sub 3) were definitely detri… more
Date: February 10, 1955
Creator: Bisson, Edmond E.; Johnson, Robert L.; Swikert, Max A. & Godfrey, Douglas
Partner: UNT Libraries Government Documents Department
open access

Growth of Disturbances in a Flame-Generated Shear Region

Description: Results are presented of an experimental and theoretical investigation of the growth of transverse velocity disturbances in the shear region caused by a flame in a duct. In the theoretical stability analysis, a flow field arising from a flame in a duct was analyzed. The flow was neutrally stable to symmetric disturbances and unstable to antisymmetric ones. In the experimental part of the program disturbances of various frequencies were imposed on a flame stabilized in a duct, and the effects we… more
Date: October 14, 1957
Creator: Blackshear, Perry L., Jr.
Partner: UNT Libraries Government Documents Department
open access

Meteorology and Aeronautics

Description: A handbook in which properties and general phenomena of the atmosphere which aeronauts and aviators should understand are discussed.
Date: 1917
Creator: Blair, William R.
Partner: UNT Libraries Government Documents Department
open access

An Analysis of Pressure Studies and Experimental and Theoretical Downwash and Sidewash Behind Five Pointed-Tip Wings at Supersonic Speeds

Description: "Flow-angle and pressure surveys behind five, thin, pointed-tip wings of varying plan form have been made at Mach numbers 1.62 and 2.41. Schlieren studies at a Mach number 1.93 for the same five plan-form wings were made to illustrate the behavior of the vortex sheet. The surveys were conducted at 1.5, 3, and 4 root chords behind three triangular wings of 50 degree, 63 degree, and 72 degree leading-edge sweep angle, and behind the 50 degree triangular wing reversed" (p. 1067).
Date: January 22, 1954
Creator: Boatright, William B.
Partner: UNT Libraries Government Documents Department
open access

Linearized Lifting-Surface and Lifting-Line Evaluations of Sidewash Behind Rolling Triangular Wings at Supersonic Speeds

Description: "The lifting-surface sidewash behind rolling triangular wings has been derived for a range of supersonic Mach numbers for which the wing leading edges remain swept behind the mark cone emanating from the wing apex. Variations of the sidewash with longitudinal distance in the vertical plane of symmetry are presented in graphical form. An approximate expression for the sidewash has been developed by means of an approach using a horseshoe-vortex approximate-lifting-line theory" (p. 455).
Date: October 21, 1955
Creator: Bobbitt, Percy J.
Partner: UNT Libraries Government Documents Department
open access

Automatic control systems satisfying certain general criterions on transient behavior

Description: "An analytic method for the design of automatic controls is developed that starts from certain arbitrary criterions on the behavior of the controlled system and gives those physically realizable equations that the control system can follow in order to realize this behavior. The criterions used are developed in the form of certain time integrals. General results are shown for systems of second order and of any number of degrees of freedom. Detailed examples for several cases in the control of a … more
Date: October 11, 1950
Creator: Boksenbom, Aaron S. & Hood, Richard
Partner: UNT Libraries Government Documents Department
open access

General algebraic method applied to control analysis of complex engine types

Description: "A general algebraic method of attack on the problem of controlling gas-turbine engines having any number of independent variables was utilized employing operational functions to describe the assumed linear characteristics for the engine, the control, and the other units in the system. Matrices were used to describe the various units of the system, to form a combined system showing all effects, and to form a single condensed matrix showing the principal effects. This method directly led to the … more
Date: April 25, 1949
Creator: Boksenbom, Aaron S. & Hood, Richard
Partner: UNT Libraries Government Documents Department
open access

Effect of Reynolds Number in Turbulent-Flow Range on Flame Speeds of Bunsen Burner Flames

Description: "The effect of flow conditions on the geometry of the turbulent Bunsen flame was investigated. Turbulent flame speed is defined in terms of flame geometry and data are presented showing the effect of Reynolds number of flow in the range of 3000 to 35,000 on flame speed for burner diameters from 1/4 to 1 1/8 inches and three fuels -- acetylene, ethylene, and propane. The normal flame speed of an explosive mixture was shown to be an important factor in determining its turbulent flame speed, and i… more
Date: 1949
Creator: Bollinger, Lowell M. & Williams, David T.
Partner: UNT Libraries Government Documents Department
open access

Experiments on Stability of Bunsen-Burner Flames for Turbulent Flow

Description: "The results of a study of the stability of propane-air flames on bunsen-burner tubes are presented. Fuel-air ratio, tube diameter, and Reynolds number were the primary variables. Regions of stability are outlined in plots of fuel-air ratio as a function of Reynolds number for flames seated on the burner lip and for flames suspended well above the burner" (p. 1).
Date: 1948
Creator: Bollinger, Lowell M. & Williams, David T.
Partner: UNT Libraries Government Documents Department
open access

Flight Investigation on a Fighter-Type Airplane of Factors Which Affect the Loads and Load Distributions on the Vertical Tail Surfaces During Rudder Kicks and Fishtails

Description: "Results are presented of a flight investigation conducted on a fighter-type airplane to determine the factors which affect the loads and load distributions on the vertical tail surfaces in maneuvers. An analysis is made of the data obtained in steady flight, rudder kicks, and fishtail maneuvers. For the rudder kicks, the significant loads were the "deflection load" resulting from an abrupt control deflection and the "dynamic load" consisting of a load corresponding to the new static equilibriu… more
Date: 1947
Creator: Boshar, John
Partner: UNT Libraries Government Documents Department
open access

Consideration of Dynamic Loads on the Vertical Tail by the Theory of Flat Yawing Maneuvers

Description: "Dynamic yawing effects on vertical-tail loads are considered by a theory of flat yawing maneuvers. A comparison is shown between computed loads and the loads measured in flight on a fighter airplane. The dynamic effects were investigated on a large flying boat for both an abrupt rudder deflection and sinusoidal rudder deflection" (p. 91).
Date: March 15, 1946
Creator: Boshar, John & Davis, Philip
Partner: UNT Libraries Government Documents Department
Back to Top of Screen