Technical Report Archive & Image Library (TRAIL) - 32,676 Matching Results

Search Results

Bibliography and Index on Vacuum and Low Pressure Measurement, January 1960 to December 1965
From Abstract: "The bibliography, a supplement to NBS Monograph 35, of the same title, covers the years 1960 to 1965, inclusive, and include 109 references for prior years not listed in Monograph 35. It contains 1787 references, 38 of which are to books. The references, besides those directly concerned with pressure measurement, include those on vacuum technology which may bear on the technique of vacuum measurement, such as on adsorption and desorption, diffusion of gases into solids, gas conductance and hardware such as pumps, seals and traps."
Heat Treatment and Properties of Iron and Steel
From Abstract: "This Monograph has been prepared to give an understanding of heat treatment principally to those unacquainted with this subject. This Monograph has been prepared to answer such inquiries and to give in simplified form a working knowledge of the basic theoretical and practical principles involved in the heat treatment of iron and steel."
Ideal Gas Thermodynamic Functions and Isotope Exchange Functions for the Diatomic Hydrides, Deuterides, and Tritides
From Abstract: "This Monograph contains a consistent set of tables of thermodynamic properties of a large number of diatomic hydrides, deuterides, and tritides, for the ideal gas state at one atmosphere pressure. In addition to the thermodynamic properties of the molecular gases, the tables also include thermodynamic properties for chemical reactions involving the isotopic exchange of hydrogen."
Calibration of Line Standards of Length and Measuring Tapes at the National Bureau of Standards
From Abstract: "The methods used at the National Bureau of Standards in calibrating line standards of length and measuring tapes submitted for standardization are outlined. The equipment used is described briefly. There is a discussion of some considerations that should be given as to whether or not a standard should be submitted to the Bureau."
Standard X-ray Diffraction Powder Patterns: Section 10. Data for 84 Substances
Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.
Standard X-ray Diffraction Powder Patterns: Section 11. Data for 70 Substances
Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.
Standard X-ray Diffraction Powder Patterns: Section 12. Data for 57 Substances
Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.
Standard X-ray Diffraction Powder Patterns: Section 13. Data for 58 substances
Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.
Thermocouple Reference Tables Based on the IPTS-68
From Abstract: "Revised reference data for thermocouples have been generated in a cooperative program between groups of the National Bureau of Standards in Boulder and Gaithersburg.This Monograph contains tables, analytic expressions, various approximations, and explanatory text.
The Mechanics of Pneumatic Tires
From Abstract: "This treatise is an attempt to provide a rational descriptive and analytical basis for tire mechanics. Chapters of this book are contributed by active research workers in the fields of rubber and textile properties, friction, material properties, tire stress problems, tire design and construction, vehicle skid and handling, and tire mechanical properties."
Standard X-ray Diffraction Powder Patterns: Section 15. Data for 112 substances
Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.
Standard X-ray Diffraction Powder Patterns : Section 16. Data for 86 Substances
Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.
Standard X-ray Diffraction Powder Patterns: Section 17. Data for 54 Substances
Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.
A Compilation and Evaluation of Mechanical, Thermal, and Electrical Properties of Selected Polymers
From Abstract: "This compilation abstracts original experimental data on the mechanical, thermal, and electrical properties of six commercially available polymers. The data are also summarized and a brief description of each polymer is included."
Applications of Waveguide and Circuit Theory to the Development of Accurate Microwave Measurement Methods and Standards
Report issued by the Bureau of Standards over "the basic theory and analytical methods used in the development of accurate microwave measurement methods and standards" (p. x). These methods are presented and discussed. This report includes tables, illustrations, and photographs.
MeV Total Neutron Cross Sections
From Introduction: "This report is a compilation of the MeV Total Neutron Cross Section data measured at the U.S. National Bureau of Standards."
Tables of Spectral-Line Intensities: Part 1, Arranged by Elements
Abstract: "These data are presented by element in part I, and all 39,000 observed lines are given in order of wavelength in Part II." From Introduction: "In the beginning, most intensity data were reported on an arbitrary scale of 10 steps, weak lines being assigned an intensity of 1, and the strongest line intensity 10."
Tables of Spectral-Line Intensities: Part 2, Arranged by Wavelengths
From Abstract: "Comparisons with other intensity measurements in individual spectra indicate that the National Bureau of Standards spectral-line intensities may have average errors of 20 percent, but first of all they provide uniform quantitative values for the seventy chemical elements commonly determined by spectrochemists. These data are presented by element in part I, and all 39,000 observed lines are given in order of wavelength in part II."
Revision of the NBS Tables of Spectral-Line Intensities Below 2450 Å
From Abstract: "A calibration is applied to the intensity measurements of the 1400 lines below 2450 A in the NBS Tables of Spectral-Line Intensities. Tables of the new values are presented with the lines arranged by elements and by wavelengths."
An Experimental Study of Phase Variations in Line-of-Sight Microwave Transmissions
From Introduction: "The purpose of this report is to present an analysis of time variations in: (1) the phase (relative to a stable phase reference) if a 9414 Mc/s signal transmitted over this path, referred to hereafter as single-path phase data; (2) the phase observed at one receiving antenna relative to that observed at an adjacent antenna, referred to as phase difference data; (3) atmospheric refractivity as recorded by a microwave refractometer located at the Haleakala terminal; (4) the wind velocity at both ends of the path, and (5) surface atmospheric refractivity measured at 5 stations located on or near the path."
Standard X-ray Diffraction Powder Patterns: Section 18. Data for 58 Substances
Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.
Standard X-ray Diffraction Powder Patterns: Section 3. Data for 51 Substances
Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.
Standard X-ray Diffraction Powder Patterns: Section 4. Data for 103 Substances
Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.
Standard X-ray Diffraction Powder Patterns: Section 5. Data for 80 Substances
Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.
Standard X-ray Diffraction Powder Patterns: Section 6. Data for 60 Substances
Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.
Standard X-ray Diffraction Powder Patterns: Section 7. Data for 81 Substances
Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.
Standard X-ray Diffraction Powder Patterns: Section 8. Data for 81 Substances
Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.
Standard X-ray Diffraction Powder Patterns: Section 9. Data for 63 Substances
Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.
Development of High-Temperature Strain Gages
From Introduction: "An improved high-temperature gage was needed, and in an attempt to fill this need an investigation was initiated in February 1954 in the Enameled Metals Laboratory at the National Bureau of Standards. The present Monograph constitutes a final summary on this program."
Basic Magnetic Quantities and the Measurement of the Magnetic Properties of Materials
From Introduction: "The work of the Magnetic Measurements Section of the National Bureau of Standards includes (1) testing of specifically prepared test specimens intended for use as standards for checking magnetic testing apparatus (2) investigation and development of magnetic testing apparatus (3) calibration of mutual inductors, test coils, and instruments for measuring magnetic fields, and (4) investigations in the field of magnetics such as studies of phenomena associated with nuclear magnetic resonance or the selection and testing of materials suitable to be used as standards of magnetic susceptibility."
Determination of Total X-Ray Beam Energy With a Calibrated Ionization Chamber
From Abstract: "This report describes the use of an air-filled aluminum-alloy ionization chamber to determine the energy transported by a bremsstrahlung beam with maximum photon energy in the range 6 to 170 Mev. This report can be used to construct a replica chamber to determine its absolute calibration between 6 and 170 Mev under a variety of experimental conditions."
Preservation of Documents by Lamination
From Abstract: "Composition and performance specifications for a cellulose acetate laminating film suitable for a cellulose acetate laminating film suitable for archival use are presented. The properties of polyethylene and polyethylene terephthalate films of interest in connection with their possible use for the protection of documents are discussed."
Tables of Einstein Functions: Vibrational Contributions to the Thermodynamic Functions
From Introduction: "The recent acceptance by physicists and chemists of new values for the fundamental constants and the continued demand for expanded and convenient tables prompted the recomputation and preparation of this volume. The authors have tried to incorporate this work a number of the more desirable features of the above-cited works, particularly with respect to their use in calculations involving: Thermodynamic properties of gases; specific heats, electrical and thermal conductivity of solids; and molecular structure and spectroscopy of diatomic and polyatomic molecules. It is the hope of the authors that formal character of this publication will insure a more adequate notice and dissemination than was accorded the earlier works, thereaby reducing the probability of still further duplication of effort."
Chemistry of Cement: Proceedings of the Fourth International Symposium, Washington 1960, Volume 2
From Synopsis: "This paper deals mainly with cement paste in terms of its porosity, internal surface area, interaction between solid substance and evaporable water and related properties."
Fire Tests of Precast Cellular Concrete Floors and Roofs
From Abstract: "The results of an investigation of lightweight, precast cellular concrete planks are given. Fire tests were made of two floor and five roof specimens made up of these planks. Variables, included density of the cellular concrete, thickness and span of the planks, reinforcement, and cover for the latter."
Analysis of Coaxial Two-Terminal Conical Capacitor
From Abstract: "The electric field is plotted and its construction steps for axial symmetry are given."
Effect of Mortar Properties on Strength of Masonry
Report issued by the National Bureau of Standards over studies conducted on the effects of mortar on the strength of masonry. Materials, methods, and results are presented and discussed. This report includes tables, illustrations, and photographs.
Radiation Patterns in the Lower Ionosphere and Fresnel Zones for Elevated Antennas Over a Spherical Earth
From Introduction: "The purpose of this work is to give the results of a detailed computation of antenna patterns in the ionosphere at VHF over a spherical earth."
Calibration Procedures for Direct-Current Resistance Apparatus
From Object and Scope of This Paper: "This paper describes the apparatus and procedures used at the National Bureau of Standards for the measurement of d-c resistance when an accuracy of a few parts in a million is required. The object will be to explain procedures in detail and as simply as possible, with a minimum reference to theory."
CRPL Exponential Reference Atmosphere
From Introduction: "In this monograph, the background of the exponential reference atmosphere will be outlined and a set of radio ray tracings presented. These ray may be used for the solution of many problems involving refraction by means of the exponential reference atmosphere."
Tables of Chemical Kinetics : Homogeneous Reactions (Supplementary Tables)
From Preface: "A brief description of the method used in compiling these tables and the limitation of coverage are given in the preface to Supplement 1 of the NBS Circular 510. The present volume contains information pertaining to substitution, exchange, and elimination reaction types and extends the material on these types found in NBS Monograph 34, Volume 1. The date on each page gives the year and month to which the literature had been surveyed."
Tables of Chemical Kinetics : Homogeneous Reactions (Supplementary Tables)
From Preface: "A brief description of the method used in compiling these tables and the limitation of coverage is given in the preface to Supplement 1. A description of the numbering system used is classifying reactions for the tables is given in Supplement 2. The present supplement contains information pertaining to Substitution, Exchange and Elimination reaction types. It is not complete as still more material falling groups is being prepared."
Bibliography and Index on Vacuum and Low Pressure Measurement
From Introduction: "This paper consists essentially of a) a bibliography, b) an author index, and c) an index of the subject matter of the bibliography. While the primary objective is to focus on vacuum measurement, it was believed essential to include in the bibliography articles on vacuum technology in some measure accessory or essential to vacuum measurement. For maximum usefulness, an index of the subject matter of the references has been prepared. The abstract publications listed in the previous paragraph have been freely drawn upon in preparing the bibliography."
Corrosion Rates On Underground Steel Test Piles at Turcot Yard, Montreal, Canada - Part 1
From Abstract: "This paper describes the determination of corrosion rates based on the polarization measurements made up to the time of the removal of the first group of piles in 1969."
NBS Papers on Underground Corrosion of Steel Piling, 1962-1971
From Introduction: "In this paper are presented the results obtained to date from the inspections of steel pilings. The investigation will be continued by additional inspections of pilings in other parts of the country in order to cover a winder range of soil environments."
The Development of Loran-C Navigation and Timing
From Abstract: "This work traces the development of the Loran-C concept from its inception as a 100-kHz pulse hyperbolic navigation system to more recent times when it found a variety of applications to both timing and navigation."
The Divergent Beam (Kossel) X-Ray Method and Its Uses in Measuring Strain Contours in an Individual Grain of Fe-3 Weight Percent Si Transformer Sheet
From Abstract: "The results showed that a variable strain distribution existed in the alloy sheet at the time it was ready for insertion into a transformer core. Small applied comprehensive and tensile loads tended to rearrange this variable strain distribution but not appreciably alter the total stored elastic energy."
Mechanical Properties of Structural Materials at Low Temperatures: A Compilation From the Literature
From Introduction: "The data are presented with the idea that an engineer who is making initial calculations on equipment for operation at cryogenic temperatures is more interested in obtaining quickly a definite figure that he in evaluating the experimental data given in several detailed reports on the same material. The graphs and tables presented here, consequently, represent an attempt by the authors to perform evaluation of data which have appeared in the literature and to present the design engineer with the result."
Thermal Conductivity of Solids At Room Temperature and Below: A Review and Compilation of the Literature
From Abstract: "An extensive compilation is given of the measured values of thermal conductivity for nearly all solid materials from room temperature down to 0.02 kelvin. Experimental methods and physical phenomena are discussed in the text and coded in the tables for references for which curves are shown."
Space Groups and Lattice Complexes
From Abstract: "The lattice complex is to the space group what the site is to the point group - an assemblage of symmetry-related equivalent points. The Tables list site sets and lattice complexes in standard and alternate representation. The higher the symmetry of the crystal structures is, the more useful the lattice-complex approach should be on the road to the ultimate goal their classification."
Back to Top of Screen