National Advisory Committee for Aeronautics (NACA) - 20 Matching Results

Search Results

Results: 1 - 20
open access

Investigation with an interferometer of the turbulent mixing of a free supersonic jet

Description: The free turbulent mixing of a supersonic jet of Mach number 1.6 has been experimentally investigated. An interferometer, of which a description is given, was used for the investigation. Density and velocity distributions through the mixing zone have been obtained. It was found that there was similarity in distribution at the cross sections investigated and that, in the subsonic portion of the mixing zone, the velocity distribution fitted the theoretical distribution for incompressible flow. It… more
Date: January 21, 1949
Creator: Gooderum, Paul B.; Wood, George P. & Brevoort, Maurice J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Investigation at low speeds of the effect of aspect ratio and sweep on rolling stability derivatives of untapered wings

Description: A low-scale wind-tunnel investigation was conducted in rolling flow to determine the effects of aspect ratio and sweep (when varied independently) on the rolling stability derivatives for a series of untapered wings. The rolling-flow equipment of the Langley stability tunnel was used for the tests. The data of the investigation have been used to develop a method of accounting for the effects of the drag on the yawing moment due to rolling throughout the lift range.
Date: January 19, 1949
Creator: Goodman, Alex & Fisher, Lewis R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Fundamental effects of aging on creep properties of solution-treated low-carbon N-155 alloy

Description: A method is developed whereby the fundamental mechanisms are investigated by which processing, heat treatment, and chemical composition control the properties of alloys at high temperatures. The method used metallographic examination -- both optical and electronic --studies of x-ray diffraction-line widths, intensities, and lattice parameters, and hardness surveys to evaluate fundamental structural conditions. Mechanical properties at high temperatures are then measured and correlated with thes… more
Date: January 18, 1949
Creator: Frey, D. N.; Freeman, J. W. & White, A. E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Laminar mixing of a compressible fluid

Description: From Summary: "A theoretical investigation of the velocity profiles for laminar mixing of a high-velocity stream with a region of fluid at rest has been made assuming that the Prandtl number is unity. A method which involves only quadratures is presented for calculating the velocity profile in the mixing layer for an arbitrary value of the free-stream Mach number. Detailed velocity profiles have been calculated for free-stream Mach numbers of 0, 1, 2, 3, and 5."
Date: January 5, 1949
Creator: Chapman, Dean R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Application of Radial-Equilibrium Condition to Axial-Flow Compressor and Turbine Design

Description: "Basic general equations governing the three-dimensional compressible flow of gas through a compressor or turbine are given in terms of total enthalpy, entropy, and velocity components of the gas. Two methods of solution are obtained for the simplified, steady axially symmetric flow; one involves the use of a number of successive planes normal to the axis of the machine and short distances apart, and the other involves only three stations for a stage in which an appropriate radial-flow path is … more
Date: January 1, 1949
Creator: Wu, Chung-Hua & Wolfenstein, Lincoln
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Analysis of variation of piston temperature with piston dimensions and undercrown cooling

Description: From Summary: "A theoretical analysis is presented that permits estimation of the changes in piston-temperature distribution induced by variations in the crown thickness, the ring-groove-pad thickness, and the undercrown surface heat-transfer coefficient. The analysis consists of the calculation of operating temperatures at various points in the piston body on the basis of the experimentally determined surface heat-transfer coefficients and boundary-region temperatures, as well as arbitrarily s… more
Date: January 15, 1948
Creator: Sanders, J. C. & Schramm, W. B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The use of source-sink and doublet distributions extended to the solution of boundary-value problems in supersonic flow

Description: "A direct analogy is established between the use of source-sink and doublet distributions in the solution of specific boundary-value problems in subsonic wing theory and the corresponding problems in supersonic theory. The correct concept of the "finite part" of an integral is introduced and used in the calculation of the improper integrals associated with supersonic doublet distributions. The general equations developed are shown to include several previously published results and particular e… more
Date: January 1948
Creator: Heaslet, Max A. & Lomax, Harvard
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Experimental investigation of the effects of viscosity on the drag and base pressure of bodies of revolution at a Mach number 1.5

Description: Models were tested to evaluate effects of Reynolds number for both laminar and turbulent boundary layers. Principal geometric variables investigated were afterbody shape and length-diameter ratio. Force tests and base-pressure measurements were made. Schlieren photographs were used to analyze the effects of viscosity on flow separation and shock-wave configuration and to verify the condition of the boundary layer as deduced from the force tests. The results are discussed and compared with theor… more
Date: January 31, 1947
Creator: Chapman, Dean R. & Perkins, Edward W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Interference Method for Obtaining the Potential Flow Past an Arbitrary Cascade of Airfoils

Description: "A procedure is presented for obtaining the pressure distribution on an arbitrary airfoil section in cascade in a two-dimensional, incompressible, and nonviscous flow. The method considers directly the influence on a given airfoil of the rest of the cascade and evaluates this interference by an iterative process, which appeared to converge rapidly in the cases tried (about unit solidity, stagger angles of 0 degree and 45 degrees). Two variations of the basic interference calculations are descri… more
Date: January 10, 1947
Creator: Katzoff, S.; Finn, Robert S. & Laurence, James C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

An Analysis of the Full-Floating Journal Bearing

Description: Report discussing an analysis of the operating characteristics of a full-floating journal bearing, a bearing in which a floating sleeve is located between the journal and bearing surfaces, is presented together with charts from which the performance of such bearings may be predicted.
Date: January 1, 1947
Creator: Shaw, M. C. & Nussdorfer, T. J., Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Tank tests to determine the effect on planing-tail hulls of varying length, width, and plan-form taper of afterbody

Description: Tests were conducted in Langley Tank no. 2 on models of an unconventional flying-boat hull called a planing-tail hull to determine the effects on resistance of varying a number of afterbody parameters. The effects of varying length, width, and plan-form taper of the afterbody are presented. Tests were made with afterbodies of two widths, two lengths, and two tapers. In the tests the depth of step and the angle of afterbody keel were held constant.(author).
Date: January 7, 1946
Creator: Dawson, John R.; Walter, Robert C. & Hay, Elizabeth S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Quantitative Treatment of the Creep of Metals by Dislocation and Rate-Process Theories

Description: "An equation for the steady-state rate of creep has been derived by applying the theory of dislocations to the creep of pure metals. The form of this equation is in agreement with empirical equations describing creep rates. The theory was also used to predict the dependence of steady-state rate of creep on physical constants of the material and good agreement was obtained with data in the literature for pure annealed metals" (p. 169).
Date: January 1, 1946
Creator: Nowick, A. S. & Machlin, E. S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Estimation of F-3 and F-4 knock-limited performance ratings for ternary and quaternary blends containing triptane or other high-antiknock aviation-fuel blending agents

Description: Charts are presented that permit the estimation of F-3 and F-4 knock-limited performance ratings for certain ternary and quaternary fuel blends. Ratings for various ternary and quaternary blends estimated from these charts compare favorably with experimental F-3 and F-4 ratings. Because of the unusual behavior of some of the aromatic blends in the F-3 engine, the charts for aromatic-paraffinic blends are probably less accurate than the charts for purely paraffinic blends.
Date: January 20, 1945
Creator: Barnett, Henry C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Calculations of Economy of 18-Cylinder Radial Aircraft Engine With Exhaust-Gas Turbine Geared to the Crankshaft

Description: Calculations based on dynamometer test-stand data obtained on an 18-cylinder radial engine were made to determine the improvement in fuel consumption that can be obtained at various altitudes by gearing an exhaust-gas turbine to the engine crankshaft in order to increase the engine-shaft work.
Date: January 1, 1945
Creator: Hannum, Richard W. & Zimmerman, Richard H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Investigation of the NACA 4-(3)(8)-045 Two-Blade Propellers at Forward Mach Numbers to 0.725 to Determine the Effects of Compressibility and Solidity on Performance

Description: From Summary: "As part of a general investigation of propellers at high forward speeds, tests of two 2-blade propellers having the NACA 4-(3)(8)-03 and NACA 4-(3)(8)-45 blade designs have been made in the Langley 8-foot high-speed tunnel through a range of blade angle from 20 degrees to 60 degrees for forward Mach numbers from 0.165 to 0.725 to establish in detail the changes in propeller characteristics due to compressibility effects. These propellers differed primarily only in blade solidity,… more
Date: January 22, 1944
Creator: Stack, John; Draley, Eugene C.; Delano, James B. & Feldman, Lewis
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

On the flow of a compressible fluid by the hodograph method 1: unification and extension of present-day results

Description: From Summary: "Elementary basic solutions of the equations of motion of a compressible fluid in the hodograph variables are developed and used to provide a basis for comparison, in the form of velocity correction formulas, of corresponding compressible and incompressible flows. The known approximate results of Chaplygin, Von Karman and Tsien, Temple and Yarwood, and Prandtl and Glauert are unified by means of the analysis of the present paper. Two new types of approximations, obtained from the … more
Date: January 12, 1944
Creator: Garrick, I. E. & Kaplan, Carl
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Determination of optimum plan forms for control surfaces

Description: Solutions found for a range of airfoil plan forms indicate that, regardless of the characteristics of the tail surface, the chord of the rudder or of the elevator should be very nearly constant over its span. The optimum ailerons are also of a characteristic shape, varying little with the plan form of the wing.
Date: January 30, 1941
Creator: Jones, Robert T. & Cohen, Doris
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Effect of body nose shape on the propulsive efficiency of a propeller

Description: Report presents the results of an investigation of the propulsive efficiency of three adjustable propellers of 10-foot diameter operated in front of four body nose shapes, varying from streamline nose that continued through the propeller plane in the form of a large spinner to a conventional open-nose radial-engine cowling. One propeller had airfoil sections close to the hub, the second had conventional round blade shanks, and the third differed from the second only in pitch distribution. The b… more
Date: January 29, 1940
Creator: Stickle, George W.; Crigler, John L. & Naiman, Irven
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Design Charts Relating to the Stalling of Tapered Wings

Description: An aid in airplane design, charts have been prepared to show the effects of wing taper, thickness ratio, and Reynolds number on the spanwise location of the initial stalling point. Means of improving poor stalling characteristics resulting from certain combinations of the variables have also been considered; additional figures illustrate the influence of camber increase to the wing tips, washout, central sharp leading edges, and wing-tip slots on the stalling characteristics. Data are included … more
Date: January 18, 1940
Creator: Soulé, H. A. & Anderson, R. F.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Free-spinning wind-tunnel tests of a low-wing monoplane with systematic changes in wings and tails V: effect of airplane relative density

Description: The reported tests are a continuation of an NACA investigation being made in the free-spinning wind tunnel to determine the effects of independent variations in load distribution, wing and tail arrangement, and control disposition on the spin characteristics of airplanes. The standard series of tests was repeated to determine the effect of airplane relative density. Tests were made at values of the relative-density parameter of 6.8, 8.4 (basic), and 12.0; and the results were analyzed. The test… more
Date: January 11, 1940
Creator: Seidman, Oscar & Neihouse, A. I.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen