National Advisory Committee for Aeronautics (NACA) - 44 Matching Results

Search Results

Airplane dopes and doping

Description: Report details some examples of dopes and doping on airplanes and balloons and the various properties of different materials. Topics covered include cellulose nitrate dopes, cellulose acetate dopes, dope covers, application of dopes, and fireproof dopes
Date: 1919
Creator: Smith, W. H.
Partner: UNT Libraries Government Documents Department

The airplane tensiometer

Description: Certain parts of an airplane are subjected not only to the stresses imposed by the aerodynamic or flying load, but also to the initial stresses, caused by the tension in the stay and drift wires. Report describes a tensiometer that measures such stresses which is simple in construction, accurate, and easily and quickly operated even by inexperienced persons. Two sizes of the instrument are available. One is suitable for wires up to one-fourth inch in diameter and the other for wires from one-fourth to three-eights inch in diameter.
Date: 1919
Creator: Larson, L. J.
Partner: UNT Libraries Government Documents Department

The Design of Wind Tunnels and Wind Tunnel Propellers

Description: Report discusses the theory of energy losses in wind tunnels, the application of the Drzewiecki theory of propeller design to wind tunnel propellers, and the efficiency and steadiness of flow in model tunnels of various types.
Date: 1919
Creator: Warner, Edward P.; Norton, F. H. & Hebbert, C. M.
Partner: UNT Libraries Government Documents Department

Effect of Compression Ratio, Pressure, Temperature, and Humidity on Power

Description: Among other factors which affect the horsepower of an airplane engine are the atmospheric pressure, and consequently the altitude at which the engine is working, and the compression ratio, or cylinder volume divided by clearance volume. The tests upon which this report is based were selected from a large number of runs made during the intercomparison of various gasolines to determine the variation of horsepower with altitude at three different compression ratios. The test results and conclusions are presented in this report.
Date: 1919
Creator: Dickinson, H. C.; James, W. S.; Anderson, G. V. & Brinkerhoff, V. W.
Partner: UNT Libraries Government Documents Department

Experimental research on air propellers, 2

Description: This report is a continuation of NACA Technical Report 14. It presents the results of an experimental investigation on the performance of air propellers which was divided into five parts, as follows: (1) Tests under conditions of flight on 16 model propellers of different forms, sections, or pitch ratios from those of Technical Report 14; (2) Tests under conditions of flight on one model propeller of variable pitch; (3) Tests under conditions of flight on three sets of right and left hand model propellers in series; (4) Tests on 12 model propellers to determine brake effect or negative thrust at negative slip; (5) Standing thrust and power tests of 67 model propellers.
Date: 1919
Creator: Durand, William F. & Lesley, E. P.
Partner: UNT Libraries Government Documents Department

The general theory of blade screws including propellers, fans, helicopter screws, helicoidal pumps, turbo-motors, and different kinds of helicoidal blades

Description: Report presents a theory which gives a complete picture and an exact quantitative analysis of the whole phenomenon of the working of blade screws, but also unites in a continuous whole the entire scale of states of work conceivable for a blade screw. Chapter 1 is devoted to the establishment of the system of fundamental equations relating to the blade screw. Chapter 2 contains the general discussion of the 16 states of work which may establish themselves for a blade screw. The existence of the vortex ring state and the whirling phenomenon are established. All the fundamental functions which enter the blade-screw theory are submitted to a general analytical discussion. The general outline of the curve of the specific function is examined. Two limited cases of the work of the screw, the screw with a zero constructive pitch and the screw with an infinite constructive pitch, are pointed out. Chapter 3 is devoted to the study of the propulsive screw or propeller. (author).
Date: 1919
Creator: De Bothezat, George
Partner: UNT Libraries Government Documents Department

The Kiln Drying of Wood for Airplanes

Description: This report is descriptive of various methods used in the kiln drying of woods for airplanes and gives the results of physical tests on different types of woods after being dried by the various kiln-drying methods.
Date: 1919
Creator: Tiemann, Harry D.
Partner: UNT Libraries Government Documents Department

The Limiting Velocity in Falling from a Great Height

Description: The purpose of this report is to give a simple treatment of the problem of calculating the final or limiting velocity of an object falling in vertical motion under gravity in a resisting medium. The equations of motion are easily set up and integrated when the density of the medium is constant and the resistance varies as the square of the velocity. The results show that the fundamental characteristics of the vertical motion under gravity in a resisting medium is the approach to a terminal or limiting velocity, whether the initial downward velocity is less or greater than the limiting velocity. This method can be used to calculate the terminal velocity of a bomb trajectory.
Date: 1919
Creator: Wilson, Edwin Bidwell
Partner: UNT Libraries Government Documents Department

Metering Characteristics of Carburetors

Description: Report presents the results of an extensive experimental investigation of the performance of different types of carburetors as effecting the maintenance under all conditions of correct ratio between the weights of fuel and air. It also gives a description of the Bureau of Standards carburetor test plant, test equipment and measuring instruments used to determine the metering characteristics of carburetors.
Date: 1919
Creator: Tice, Percival S. & Dickinson, H. C.
Partner: UNT Libraries Government Documents Department

Temperatures in Spark Plugs Having Steel and Brass Shells

Description: From Resume: "Brass has often been assumed superior to steel for spark plug shells because of its greater heat conductivity. The measurements described in this report prove the contrary, showing that the interior of a spark plug having a brass shell is from 50 degrees to 150 degrees c. (90 degrees to 270 degrees f.) hotter than that of a similar steel plug. It is to be concluded that steel is to be preferred to brass for spark plug shells. This report embodies the results of measurements taken of electrodes and a comparison of brass and steel insulators of spark plugs while they were in actual operation."
Date: 1919
Creator: Cragoe, C. S.
Partner: UNT Libraries Government Documents Department

The Variation of Yawing Moment Due to Rolling

Description: The aerodynamical constants of an airplane necessary for the discussion of stability are partly observed and partly calculated. Among the calculated coefficients is n(p), which is the variation of yawing moment due to rolling. (author).
Date: 1919
Creator: Wilson, Edwin Bidwell
Partner: UNT Libraries Government Documents Department

Theory of an Airplane Encountering Gusts 3

Description: Report presents a new method for solving linear equations developed by Bromwich, which is suited to determine the motion for any particular gust, when the machine started from equilibrium, without the trouble of determining the constants of integration in the complementary function. (author).
Date: October 15, 1918
Creator: Wilson, Edwin Bidwell
Partner: UNT Libraries Government Documents Department

Aerofoils and aerofoil structural combinations

Description: Report presents results of wind tunnel tests of cambered aerofoils and body-wing combinations used for biplanes. Aerodynamic characteristics including drag, lift-drift ratio and stability derivatives are given.
Date: 1918?
Creator: Gorrell, Edgar S & Martin, H S
Partner: UNT Libraries Government Documents Department

Air flow through poppet valves

Description: Report discusses the comparative continuous flow characteristics of single and double poppet valves. The experimental data presented affords a direct comparison of valves, single and in pairs of different sizes, tested in a cylinder designed in accordance with current practice in aviation engines.
Date: 1918
Creator: Lewis, G W & Nutting, E M
Partner: UNT Libraries Government Documents Department

Airplane stress analysis

Description: Report presents stress analysis of individual components of an airplane. Normal and abnormal loads, sudden loads, simple stresses, indirect simple stresses, resultant unit stress, repetitive and equivalent stress, maximum steady load and stress are considered.
Date: January 1918
Creator: Zahm, A. F. & Crook, L. H.
Partner: UNT Libraries Government Documents Department

Experimental research on air propellers

Description: The purposes of the experimental investigation on the performance of air propellers described in this report are as follows: (1) the development of a series of design factors and coefficients drawn from model forms distributed with some regularity over the field of air-propeller design and intended to furnish a basis of check with similar work done in other aerodynamic laboratories, and as a point of departure for the further study of special or individual types and forms; (2) the establishment of a series of experimental values derived from models and intended for later use as a basis for comparison with similar results drawn from certain selected full-sized forms and tested in free flight.
Date: 1918
Creator: Durand, William F.
Partner: UNT Libraries Government Documents Department

Fabrics for aeronautic construction

Description: The Bureau of Standards undertook the investigation of airplane fabrics with the view of finding suitable substitutes for the linen fabrics, and it was decided that the fibers to be considered were cotton, ramie, silk, and hemp. Of these, the cotton fiber was the logical one to be given primary consideration. Report presents the suitability, tensibility and stretching properties of cotton fabric obtained by laboratory tests.
Date: 1918
Creator: Walen, E. D.
Partner: UNT Libraries Government Documents Department

An investigation of the elements which contribute to statical and dynamical stability, and of the effects of variation in those elements

Description: Part 1 gives details of models tested and methods of testing of the Eiffel 36 wing alone and the JN2 aircraft. Characteristics and performance curves for standard JN are included. Part 2 presents a statistical analysis of the following: lift and drag contributed by body and chassis tested without wings; lift and drag contributed by tail, tested without wings; the effect on lift and drift of interference between the wings of a biplane combination; lift and drag contributed by the addition of body, chassis, and tail to a biplane combination; total parasite resistance; effect of varying size of tail, keeping angle of setting constant; effect of varying length of body and size of tail at the same time, keeping constant moment of tail surface about the center of gravity; forces on the tail and the effects of downwash; effect of size and setting of tail on statical longitudinal stability effects of length of body on stability; the effects of the various elements of an airplane on longitudinal stability and the placing of the force vectors. Part 3 presents the fundamental principals of dynamical stability; computations of resistance derivatives; solution of the stability equation; dynamical stability of the Curtiss JN2; tabulation of resistance derivatives; discussion of the resistance derivatives; formation and solution of stability equations; physical conceptions of the resistance derivatives; elements contributing to damping and an investigation of low speed conditions. Part 4 includes a summary of the results of the statistical investigation and a summary of the results for dynamic stability.
Date: 1918
Creator: Klemin, Alexander; Warner, Edward P. & Denkinger, George M.
Partner: UNT Libraries Government Documents Department