National Advisory Committee for Aeronautics (NACA) - 1,082 Matching Results

Search Results

Results: 1 - 24 next
open access

Flow observations with tufts and lampblack of the stalling of four typical airfoil sections in the NACA variable-density tunnel

Description: From Summary: "A preliminary investigation of the stalling processes of four typical airfoil sections was made over the critical range of the Reynolds Number. Motion pictures were taken of the movements of small silk tufts on the airfoil surface as the angle of attack increased through a range of angles including the stall. The boundary-layer flow also at certain angles of attack was indicated by the patterns formed by a suspension of lampblack in oil brushed onto the airfoil surface. These obs… more
Date: October 1938
Creator: Abbott, Ira H. & Sherman, Albert
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Theories of Turbulence

Description: "The theory of turbulence reached its full growth at the end of the 19th century as a result of the work by Boussinesq and Reynolds. It then underwent a long period of stagnation which ended under the impulse given to it by the development of wind tunnels caused by the needs of aviation. Numerous researchers, attempted to put Reynolds' elementary statistical theory into a more precise form. During the war, some isolated scientists - von Weizsacker and Heisenberg in Germany, Kolmogoroff in Russi… more
Date: October 1955
Creator: Agostini, L. & Bass, J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Flight determination of wing and tail loads on a fighter-type airplane by means of strain-gage measurements

Description: Report presenting a flight investigation to determine the contributions of wing, tail, and fuselage to the total airplane lift of a propeller-driven fighter-type airplane. The tests occurred over a range of Mach numbers. The loads on the various airplane components were measured by the use of calibrated strain-gage installations located at the roots of the wings and horizontal tail surfaces.
Date: October 1948
Creator: Aiken, William S., Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Motion of a ballistic missile angularly misaligned with the flight path upon entering the atmosphere and its effect upon aerodynamic heating, aerodynamic loads, and miss distance

Description: From Summary: "An analysis is given of the oscillating motion of a ballistic missile which upon entering the atmosphere is angularly misaligned with respect to the flight path. The history of the motion for some example missiles is discussed from the point of view of the effect of the motion on the aerodynamic heating and loading. The miss distance at the target due to misalignment and to small accidental trim angles is treated. The stability problem is also discussed for the case where the mis… more
Date: October 1957
Creator: Allen, H. Julian
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A Study of the Motion and Aerodynamic Heating of Missiles Entering the Earth's Atmosphere at High Supersonic Speeds

Description: A simplified analysis of the velocity and deceleration history of missiles entering the earth's atmosphere at high supersonic speeds is presented. The results of this motion analysis are employed to indicate means available to the designer for minimizing aerodynamic heating. The heating problem considered involves not only the total heat transferred to a missile by convection, but also the maximum average and local time rates of convective heat transfer.
Date: October 1957
Creator: Allen, H. Julian & Eggers, A. J., Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Heat of Combustion of the Product Formed by the Reaction of Acetylene and Diborane (LFPL-CZ-3)

Description: The heat of combustion of the product formed by the reaction acetylene and diborane was found to be 20,100 +/- 100 Btu per pound for the reaction of liquid fuel to gaseous carbon dioxide, gaseous water, and solid boric oxide. The measurements were made in a Parr oxygen-bomb calorimeter, and chemical analyses both of the sample and of the combustion products indicated combustion in the bomb calorimeter to have been 97 percent complete. The estimated net heat of combustion for complete combustion… more
Date: October 24, 1957
Creator: Allen, Harrison, Jr. & Tannenbaum, Stanley
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Performance comparison at supersonic speeds of inlets spilling excess flow by means of bow shock, conical shock, or bypass

Description: Report presenting a comparison of fixed-geometry, translating-spike, and bypass-inlets on the basis of turbojet- and ramjet-engine performance. Results regarding a comparison of the experimental data and its application to ramjet and turbojet engines are provided.
Date: October 23, 1953
Creator: Allen, J. L. & Beke, Andrew
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Effect of Compression Ratio on Knock Limits of High-Performance Fuels in a CFR Engine 1: Blends of Triptane and 28-R Fuel

Description: Report discussing the knock-limited performance of blends of triptane and 28-R fuel in an F-4 engine at three sets of conditions and three compression ratios. The knock limits of the triptane blends were more sensitive to compression ratio than the 28-R fuel, and the sensitivities of the blends increased as the severity of other engine conditions increased.
Date: October 1944
Creator: Alquist, Henry E. & Tower, Leonard K.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Combustion of Liquid Fuels in Diesel Engine

Description: Hitherto, definite specifications have always been made for fuel oils and they have been classified as more or less good or non-utilizable. The present aim, however, is to build Diesel engines capable of using even the poorest liquid fuels and especially the waste products of the oil industry, without special chemical or physical preparation.
Date: October 1924
Creator: Alt, Otto
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Calculated Heats of Formation and Combustion of Boron Compounds (Boron, Hydrogen, Carbon, Silicon)

Description: Memorandum presenting the calculation of the heats of formation and combustion for liquid and gaseous alkyl- and silyl-substituted boron compounds by a semitheoretical method. The results indicated that alkylation and more especially silylation reduce the heat of combustion. Results regarding alkyl- and silyldecaboranes, diborylmethane, diborylethane, and their alkyl derivatives, bipentaboranyl and bideocaboranyl, dipentaboranyl- and didecaboranylalkanes, and heats of combustion of isomers are … more
Date: October 4, 1955
Creator: Altshuller, Aubrey P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Method for studying helicopter longitudinal maneuver stability

Description: A theoretical analysis of helicopter maneuver stability is made and the results are compared with experimental results for both a single and a tandem rotor helicopter. Techniques are described for measuring in flight the significant stability derivatives for use with the theory to aid in design studies of means for achieving marginal maneuver stability for a prototype helicopter.
Date: October 1953
Creator: Amer, Kenneth B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Theory of helicopter damping in pitch or roll and a comparison with flight measurements

Description: Report presenting calculations and flight-test measurements on a single-main-rotor helicopter indicate that the damping moment about the helicopter center of gravity produced during pitching or rolling by a rotor which has flapping hinges on the rotor shaft, which depends primarily on four quantities: rotor speed, blade mass factor, height of the rotor hub above the helicopter center of gravity, and the ratio of collective pitch to the thrust coefficient - solidity ratio.
Date: October 1950
Creator: Amer, Kenneth B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Charts for estimating tail-rotor contribution to helicopter directional stability and control in low-speed flight

Description: "Theoretically derived charts and equations are presented by which tail-rotor design studies of directional trim and control response at low forward speed can be conveniently made. The charts can also be used to obtain the main-rotor stability derivatives of thrust with respect to collective pitch and angle of attack at low forward speeds. The use of the charts and equations for tail-rotor design studies is illustrated. Comparisons between theoretical and experimental results are presented. The… more
Date: October 27, 1953
Creator: Amer, Kenneth B. & Gessow, Alfred
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

An Investigation at Low Speed of a Large-Scale Triangular Wing of Aspect Ratio Two 3: Characteristics of Wing With Body and Vertical Tail

Description: Report presenting an investigation to determine the aerodynamic characteristics in sideslip of a triangular wing of aspect ratio 2.04 in combination with a body of fineness ratio 12.5 and a vertical tail surface. The body combined with the triangular plan-form wing caused no significant changes in the lift characteristics of the wing and only a 1-percent decrease in the static margin. Results regarding the longitudinal characteristics, lateral and directional characteristics, and estimation of … more
Date: October 14, 1949
Creator: Anderson, Adrien E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Determination of Coupled Modes and Frequencies of Swept Wings by Use of Power Series

Description: "A solution is presented for the coupled modes and frequencies of swept wings mounted on a fuselage. The energy method is used in conjunction with power series to obtain the characteristic equations for both symmetrical and asymmetrical vibration. A numerical example which is susceptible to exact solution is presented, and the results for the exact solution and the solution presented in this paper show excellent agreement" (p. 1).
Date: October 20, 1947
Creator: Anderson, Roger A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Measurements in Flight of the Longitudinal Characteristics of Two Jet Aircraft, One With a Diving Tendency and the Other With a Climbing Tendency at High Mach Numbers

Description: Memorandum presenting flight tests conducted on two straight-wing jet airplanes of generally similar configuration, one exhibiting a diving tendency and the other a climbing tendency, in order to investigate the cause for the particular type of behavior of each airplane at high Mach numbers. The results showed that the diving tendency experienced by the one airplane was due to the predominant effect of an increased angle of attack of the horizontal tail.
Date: October 5, 1951
Creator: Anderson, Seth B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Flight Measurements of the Flying Qualities of a Lockheed P-80A Airplane (Army No. 44-85099): Lateral- and Directional-Stability and Control Characteristics

Description: "This report contains the flight-test results of the lateral and directional-stability and control phase (including tests with wing-tip tanks) of a general flying-qualities investigation of the Lockheed P-80A airplane (Army No. 44-85099). These tests were conducted at indicated airspeeds up to 494 miles per hour (0.691 Mach number) at low altitude and up to 378 miles per hour (0.816 Mach number) at high altitude. These tests showed that the flying qualities of the airplane were for the most par… more
Date: October 24, 1947
Creator: Anderson, Seth B. & Cooper, George E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Flight measurements of the low-speed characteristics of a 35 degree swept-wing airplane with blowing-type boundary-layer control in the trailing-edge flaps

Description: Report presenting tests to determine the flight characteristics of an F-86 airplane equipped with a blowing-type boundary-layer-control installation on the trailing-edge flaps. The effectiveness of the flap was determined in conjunction with slatted leading edges and an inflatable rubber boot on the leading edge. Measurements were made of lift, drag, flow requirements, and computations for take-off, climb, and landing.
Date: October 25, 1956
Creator: Anderson, Seth B.; Quigley, Hervey C. & Innis, Robert C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Effect of three design parameters on the operating characteristics of 75-millimeter-bore cylindrical roller bearings at high speeds

Description: Report presenting three experimental investigation conducted with 75-millimeter-bore cylindrical roller bearings to determine the effects of roller axial clearance ratio, cage diametral clearance ratio, and cage land width-diameter ratio on bearing operating temperatures, wear, cage slip, and high-speed operating characteristics.
Date: October 1956
Creator: Anderson, William J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Generalized Performance Comparison of Large Conventional, Tail Boom, and Tailless Airplanes

Description: Report presenting an investigation to determine the performance of large tailless and conventional airplanes. The primary conclusion drawn fro the testing is that large all-wing tailless airplanes may have better performance characteristics than their equivalent tail-boom airplanes for certain types of missions. Results regarding a general performance comparison, performance variations with structural weight, landing speed, and take-off distance, and performance comparison based on arbitrary de… more
Date: October 1947
Creator: Ankenbruck, Herman O. & McKinney, Marion O., Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Summary of Rocket-Model Tests at Zero Lift of the Northrop MX-775B Missile Configuration from Mach Numbers of 0.9 to 1.8

Description: Flight tests were conducted between Mach numbers of 0.9 and 1.8 over a Reynolds number range of 9(exp 6) to 30(exp 6) to determine the zero-lift drag and some rolling-effectiveness characteristics of the Northrop MX -775B missile with small and large body. The MX-775B is a proposed long range, supersonic, ground-to-ground missile having an arrow wing with 67.5 degree leading-edge sweep, 15 deg trailing-edge sweep, and a modified NACA 0004 airfoil section. The configuration has no horizontal tai… more
Date: October 1, 1953
Creator: Arbic, Richard G. & Gillespie, Warren, Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Altitude-Chamber Performance of British Rolls-Royce Nene II Engine 2: 18.41-Inch-Diameter Jet Nozzle

Description: Report presenting an altitude-chamber investigation to determine the altitude performance characteristics of the British Rolls-Royce Nene II turbojet engine with an 18.41-inch-diameter jet nozzles. Testing occurred at a range of simulated altitudes and ram-pressure ratios. Results regarding the simulated flight performance, generalized performance, and effect of jet-nozzle area on performance are provided.
Date: October 26, 1949
Creator: Armstrong, J. C.; Wilsted, H. D. & Vincent, K. R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Altitude-ignition limit of a turbojet engine using a condenser-discharge ignition system

Description: The altitude-ignition limits of a condenser-discharge ignition system installed on a turbojet engine were determined at a flight Mach number of 0.6 using 1.1-pound Reid vapor pressure fuel. Ignition was possible up to an altitude of 55,000 feet with 4.8 joules per spark and 6 sparks per second.
Date: October 23, 1951
Creator: Armstrong, John C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Investigation of several techniques for improving altitude starting limits of turbojet engines

Description: Report presenting a study of the altitude-starting limits of a production turbojet engine with an axial-flow compressor and a multiple through-flow combustor. The ignition limits, flame-propagation limits, and acceleration limits of the engine were improved to increase the starting limits to relatively high altitude.
Date: October 29, 1952
Creator: Armstrong, John C. & Wilsted, H. D.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen