National Advisory Committee for Aeronautics (NACA) - 45 Matching Results

Search Results

Airplane dopes and doping

Description: Report details some examples of dopes and doping on airplanes and balloons and the various properties of different materials. Topics covered include cellulose nitrate dopes, cellulose acetate dopes, dope covers, application of dopes, and fireproof dopes
Date: 1919
Creator: Smith, W. H.
Partner: UNT Libraries Government Documents Department

An investigation of the elements which contribute to statical and dynamical stability, and of the effects of variation in those elements

Description: Part 1 gives details of models tested and methods of testing of the Eiffel 36 wing alone and the JN2 aircraft. Characteristics and performance curves for standard JN are included. Part 2 presents a statistical analysis of the following: lift and drag contributed by body and chassis tested without wings; lift and drag contributed by tail, tested without wings; the effect on lift and drift of interference between the wings of a biplane combination; lift and drag contributed by the addition of body, chassis, and tail to a biplane combination; total parasite resistance; effect of varying size of tail, keeping angle of setting constant; effect of varying length of body and size of tail at the same time, keeping constant moment of tail surface about the center of gravity; forces on the tail and the effects of downwash; effect of size and setting of tail on statical longitudinal stability effects of length of body on stability; the effects of the various elements of an airplane on longitudinal stability and the placing of the force vectors. Part 3 presents the fundamental principals of dynamical stability; computations of resistance derivatives; solution of the stability equation; dynamical stability of the Curtiss JN2; tabulation of resistance derivatives; discussion of the resistance derivatives; formation and solution of stability equations; physical conceptions of the resistance derivatives; elements contributing to damping and an investigation of low speed conditions. Part 4 includes a summary of the results of the statistical investigation and a summary of the results for dynamic stability.
Date: 1918
Creator: Klemin, Alexander; Warner, Edward P. & Denkinger, George M.
Partner: UNT Libraries Government Documents Department

Periodic stresses in gyroscopic bodies, with applications to air screws

Description: Report discusses periodic stresses in gyroscopic bodies with applications to air screws caused by particle mass. Report concludes that all modern air screws obey the laws found for plane groups of particles. In particular the two-bladers exert on the shaft a rhythmic gyroscopic torque; the multibladers a steady one; both easily calculable for any given conditions of motion and mass distribution.
Date: 1918
Creator: Zahm, A. F.
Partner: UNT Libraries Government Documents Department

Aerofoils and aerofoil structural combinations

Description: Report presents results of wind tunnel tests of cambered aerofoils and body-wing combinations used for biplanes. Aerodynamic characteristics including drag, lift-drift ratio and stability derivatives are given.
Date: 1918?
Creator: Gorrell, Edgar S & Martin, H S
Partner: UNT Libraries Government Documents Department

Fabrics for aeronautic construction

Description: The Bureau of Standards undertook the investigation of airplane fabrics with the view of finding suitable substitutes for the linen fabrics, and it was decided that the fibers to be considered were cotton, ramie, silk, and hemp. Of these, the cotton fiber was the logical one to be given primary consideration. Report presents the suitability, tensibility and stretching properties of cotton fabric obtained by laboratory tests.
Date: 1918
Creator: Walen, E. D.
Partner: UNT Libraries Government Documents Department

Thermodynamic Efficiency of Present Types of Internal Combustion Engines for Aircraft

Description: Report presents requirements of internal combustion engines suitable for aircraft. Topics include: (1) service requirements for aeronautic engines - power versus weight, reliability, and adaptability factors, (2) general characteristics of present aero engines, (3) aero engine processes and functions of parts versus power-weight ratio, reliability, and adaptability factors, and (4) general arrangement, form, proportions, and materials of aero parts - power-weight ratio, reliability, and adaptability.
Date: 1917
Creator: Lucke, Charles E.
Partner: UNT Libraries Government Documents Department

Annual report of the National Advisory Committee for Aeronautics (2nd) together with the message of the President of the United States transmitting the report for the fiscal year ending June 30, 1916. administrative report including technical report

Description: Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, expenditures, problems, recommendations and a compilation of technical reports produced.
Date: 1917
Partner: UNT Libraries Government Documents Department

General Specifications Covering Requirements of Aeronautic Instruments

Description: Report includes specifications for the use and production of instruments used in the navigation and operation of aircraft. Specifications are included for the following instruments: barometer or altimeter, compass, air speed meter, inclinometer, drift meter, tachometer, oil gauge, oil pressure gauge, gasoline gauge, gasoline flow indicator, distance indicator, barograph, angle of attack indicator, radiator temperature indicator, gasoline feed system pressure indicator, sextant, airplane director.
Date: 1917
Partner: UNT Libraries Government Documents Department

Airplane stress analysis

Description: Report presents stress analysis of individual components of an airplane. Normal and abnormal loads, sudden loads, simple stresses, indirect simple stresses, resultant unit stress, repetitive and equivalent stress, maximum steady load and stress are considered.
Date: January 1918
Creator: Zahm, A. F. & Crook, L. H.
Partner: UNT Libraries Government Documents Department

The Design of Wind Tunnels and Wind Tunnel Propellers

Description: Report discusses the theory of energy losses in wind tunnels, the application of the Drzewiecki theory of propeller design to wind tunnel propellers, and the efficiency and steadiness of flow in model tunnels of various types.
Date: 1919
Creator: Warner, Edward P.; Norton, F. H. & Hebbert, C. M.
Partner: UNT Libraries Government Documents Department

The Limiting Velocity in Falling from a Great Height

Description: The purpose of this report is to give a simple treatment of the problem of calculating the final or limiting velocity of an object falling in vertical motion under gravity in a resisting medium. The equations of motion are easily set up and integrated when the density of the medium is constant and the resistance varies as the square of the velocity. The results show that the fundamental characteristics of the vertical motion under gravity in a resisting medium is the approach to a terminal or limiting velocity, whether the initial downward velocity is less or greater than the limiting velocity. This method can be used to calculate the terminal velocity of a bomb trajectory.
Date: 1919
Creator: Wilson, Edwin Bidwell
Partner: UNT Libraries Government Documents Department

The altitude effect on air speed indicators

Description: The report present the results of a theoretical and experimental study of the effect, on the performance of air speed indicators, of the different atmospheric conditions experienced at various altitudes.
Date: 1917~
Creator: Hersey, M. D.; Hunt, F. L. & Eaton, H. N.
Partner: UNT Libraries Government Documents Department

Air flow through poppet valves

Description: Report discusses the comparative continuous flow characteristics of single and double poppet valves. The experimental data presented affords a direct comparison of valves, single and in pairs of different sizes, tested in a cylinder designed in accordance with current practice in aviation engines.
Date: 1918
Creator: Lewis, G W & Nutting, E M
Partner: UNT Libraries Government Documents Department

The Variation of Yawing Moment Due to Rolling

Description: The aerodynamical constants of an airplane necessary for the discussion of stability are partly observed and partly calculated. Among the calculated coefficients is n(p), which is the variation of yawing moment due to rolling. (author).
Date: 1919
Creator: Wilson, Edwin Bidwell
Partner: UNT Libraries Government Documents Department

Theory of an Airplane Encountering Gusts 3

Description: Report presents a new method for solving linear equations developed by Bromwich, which is suited to determine the motion for any particular gust, when the machine started from equilibrium, without the trouble of determining the constants of integration in the complementary function. (author).
Date: October 15, 1918
Creator: Wilson, Edwin Bidwell
Partner: UNT Libraries Government Documents Department

The general theory of blade screws including propellers, fans, helicopter screws, helicoidal pumps, turbo-motors, and different kinds of helicoidal blades

Description: Report presents a theory which gives a complete picture and an exact quantitative analysis of the whole phenomenon of the working of blade screws, but also unites in a continuous whole the entire scale of states of work conceivable for a blade screw. Chapter 1 is devoted to the establishment of the system of fundamental equations relating to the blade screw. Chapter 2 contains the general discussion of the 16 states of work which may establish themselves for a blade screw. The existence of the vortex ring state and the whirling phenomenon are established. All the fundamental functions which enter the blade-screw theory are submitted to a general analytical discussion. The general outline of the curve of the specific function is examined. Two limited cases of the work of the screw, the screw with a zero constructive pitch and the screw with an infinite constructive pitch, are pointed out. Chapter 3 is devoted to the study of the propulsive screw or propeller. (author).
Date: 1919
Creator: De Bothezat, George
Partner: UNT Libraries Government Documents Department

Experimental research on air propellers, 2

Description: This report is a continuation of NACA Technical Report 14. It presents the results of an experimental investigation on the performance of air propellers which was divided into five parts, as follows: (1) Tests under conditions of flight on 16 model propellers of different forms, sections, or pitch ratios from those of Technical Report 14; (2) Tests under conditions of flight on one model propeller of variable pitch; (3) Tests under conditions of flight on three sets of right and left hand model propellers in series; (4) Tests on 12 model propellers to determine brake effect or negative thrust at negative slip; (5) Standing thrust and power tests of 67 model propellers.
Date: 1919
Creator: Durand, William F. & Lesley, E. P.
Partner: UNT Libraries Government Documents Department