National Advisory Committee for Aeronautics (NACA) - 98 Matching Results

Search Results

Results: 1 - 24 next
open access

The Advantages of Uniform Fuel Distribution for Air-Cooled Engines From Considerations of Cooling Requirements and Fuel Economy

Description: "The purpose of this report is to show by analysis of existing data, pending direct experimental determination, the extent to which nonuniform distribution of fuel to cylinders of a multicylinder engine can produce temperature deviation and the benefits to be anticipated from attainment of uniform fuel distribution" (p. 1).
Date: December 1943
Creator: Rubert, K. F.; Corson, Blake W., Jr. & Nielsen, Jack
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Tests of a Full-Scale TBF-1 Aileron Installation in the Langley 16-Foot High-Speed Tunnel

Description: "This report describes tests in the Langley 16-foot high-speed tunnel to determine whether these failures could be attributed to changes in the aerodynamic characteristics of the ailerons at high speeds" (p. 1).
Date: December 1944
Creator: Becker, John V. & Korycinski, Peter F.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Analysis and Correlation of Data Obtained by Six Laboratories on Fuel-Vapor Loss From Fuel Tanks During Simulated Flight

Description: Report presenting an analysis of data on fuel-vapor loss from fuel tanks during simulated flight obtained by six laboratories to show the effects of individual variables such as altitude, initial fuel temperature, rate of climb, booster-pump agitation, fuel depth, fuel-surface area, types of fuel, and vent-line pressure drop on fuel-vapor loss.
Date: December 1944
Creator: Stone, Charles S.; Baker, Sol & Englert, Gerald W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

An analysis of the effect of core structure and performance on volume and shape of cross-flow tubular intercoolers

Description: From Introduction: "The purpose of this paper is to show, in a similar manner, the effect of change in the core structure of the tubular intercooler on the over-all dimensions when the operating conditions are fixed."
Date: December 1942
Creator: Reuter, J. George & Valerino, Michael F.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Analysis of V-G Records From the SNJ-4 Airplane

Description: Report discusses an attempt to adapt a method of analysis of V-G data to predict the occurrences of large values of airspeed and acceleration from an SNJ-4 airplane; the data are presented as "flight envelopes". The flight envelopes "predict that, on average, in a stated number of flight hours, one airspeed, one positive acceleration, and one negative acceleration will exceed the envelope with equal probability of the accelerations being experienced at any airspeed" (from Discussion). The analy… more
Date: December 1945
Creator: Wilkerson, M. & Bennett, S. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Calculations of the Performance of a Compression-Ignition Engine-Compressor Turbine Combination 1: Performance of a Highly Supercharged Compression-Ignition Engine

Description: From Summary: "Small high-speed single-cylinder compression-ignition engines were tested to determine their performance characteristics under high supercharging. Calculations were made on the energy available in the exhaust gas of the compression-ignition engines. The maximum power at any given maximum cylinder pressure was obtained when the compression pressure was equal to the maximum cylinder pressure. Constant-pressure combustion was found possible at an engine speed of 2200 rpm."
Date: December 1945
Creator: Sanders, J. C. & Mendelson, Alexander
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Characteristics of beveled-trailing-edge elevators on a typical pursuit fuselage at altitudes simulating-normal flight and spin conditions

Description: Report presenting lift and elevator hinge-moment characteristics were measured on horizontal tail provided with elevators having three different beveled trailing edges. Results regarding fuselage alone and fuselage interference, lift characteristics of fuselage-tail combination, elevator hinge-moment characteristics, drag, and comparison with data from two-dimensional-flow tests are provided.
Date: December 1942
Creator: Gillis, Clarence L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Charts for the determination of wing torsional stiffness required for specified rolling characteristics or aileron reversal speed

Description: "A series of charts are presented by which the wing torsional stiffness required to meet a given standard of rolling effectiveness may be quickly determined. The charts may also be used to obtain quickly the aileron reversal speed and the variation of the loss in rolling effectiveness with airspeed. The charts apply to linearly tapered wings and elliptical wings of tubular-shell construction having various aspect ratios with aileron span and location of ailerons as variables" (p. 457).
Date: December 1944
Creator: Pearson, Henry A. & Aiken, William S., Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Charts Showing Stability and Control Characteristics of Airplanes in Flight

Description: Report presents a series of charts used to demonstrate typical good and undesirable airplane characteristics as determined in flight that were used to facilitate discussion at a series of conferences between the National Advisory Committee, Army, Navy, and representatives of the aircraft industry. For each chart, the purpose of the test, the flight technique used, the items recorded, and the evaluation and interpretation of the data obtained were provided. Additional figures drawn on the board … more
Date: December 1944
Creator: Stability and Control Section. Flight Research Division
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A comparison at high speed of the aerodynamic merits of models of medium bombers having thickened wing roots and having wings with nacelles

Description: Report presenting testing of models of medium-bomber designs to investigate the relative characteristics of thickened wing roots with propeller-shaft fairings and wings with nacelles. Incremental drag coefficients due to thickened wing roots and due to propeller-shaft fairings through a range of Mach numbers at lift coefficient 0.10. Results regarding force tests, pressure-distribution tests, effect of thickening and filleting, nacelles and propeller-shaft fairings, and a comparison of submerge… more
Date: December 1943
Creator: Draley, Eugene C.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Conformal Transformation of an Airfoil Into a Straight Line and Its Application to the Inverse Problem of Airfoil Theory

Description: "A method of conformal transformation is developed that maps an airfoil into a straight line, the line being chosen as the extended chord line of the airfoil. The mapping is accomplished by operating directly with the airfoil ordinates. The absence of any preliminary transformation is found to shorten the work substantially over that of previous methods. Use is made of the superposition of solutions to obtain a rigorous counterpart of the approximate methods of thin-airfoils theory" (p. 1).
Date: December 1944
Creator: Mutterperl, William
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Construction of Wire Strain Gages for Engine Application

Description: Report presenting instructions for winding, baking, and mounting a phanolic resin-impregnated, bobbin-type wire strain gage that consists of Advance wire wound around a paper form. A description of some test equipment useful for establishing the merits of the techniques used in gage construction has been included.
Date: December 1943
Creator: Nettles, J. Cary & Tucker, Maurice
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Correlation of single-cylinder cooling tests of a Pratt and Whitney R-2800-21 engine cylinder with wind-tunnel tests of a Pratt and Whitney R-2800-27 engine

Description: Report presenting an equation in which it is possible to correlate the cooling characteristics of an engine. Results regarding engine cooling, engine performance, and estimated cooling-pressure-drop requirements are provided.
Date: December 1943
Creator: Ellerbrock, Herman H., Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Design of Cooling Ducts With Special Reference to the Boundary Layer at the Inlet

Description: "A study has been made of underslung cooling ducts with special references to the problems presented by the boundary layer on the fuselage skin. It was found that good flow can be obtained in such ducts by (1) making the inlet opening of such size that the mean inlet velocity is about 0.6 the free-stream velocity and (2) providing vanes behind as well as ahead of the radiator. Tables to facilitate design are included, together with an example " (p. 1).
Date: December 1940
Creator: Katzoff, S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Drag and propulsive characteristics of air-cooled engine-nacelle installations for two-engine airplanes

Description: Report presenting a study on wing-nacelle propeller arrangements using a two-engine airplane with nacelles varying in diameter. Results regarding the power-off characteristics, propulsive and overall efficiencies, power-on characteristics, and pressure distributions are provided.
Date: December 1940
Creator: Wilson, Herbert A., Jr. & Lehr, Robert R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Effect of airplane design efficiency and engine economy on range

Description: Report presenting an examination of the effects of variations in efficiency parameters, including engine economy, aerodynamic efficiency, and structural efficiency, on airplane performance. Efficiency parameters were found to be extremely ineffective in adjusting the airplane performance to its tactical mission as compared to primary parameters like altitude, power, gross weight, and wing area.
Date: December 1942
Creator: Brevoort, Maurice J.; Stickle, George W. & Hill, Paul R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Effect of Changes in Aspect Ratio, Side Area, Flight-Path Angle, and Normal Acceleration on Lateral Stability

Description: Report presenting computations made to determine the effect of changes in wing aspect ratio, additional side area, flight-path angle, and normal acceleration on the relation between the fin area and the dihedral angle required for spiral and for oscillatory lateral stability for a hypothetical airplane of the pursuit or fighter categories. The diagrams indicate that the effect of wing aspect ratio on lateral stability is small.
Date: December 1942
Creator: Bamber, M. J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The effect of concentrated loads on flexible rings in circular shells

Description: Report presenting a method of making strain measurements on a series of circular cylinders with reinforcing rings, subjected to concentrated loads, in which the bending stiffness of the rings was varied systematically over a wide range. Results regarding the general remarks, bending-moment coefficient, and skin shear coefficients are provided.
Date: December 1945
Creator: Kuhn, Paul; Duberg, John E. & Griffith, George E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Effect of Propeller-Axis Angle of Attack on Thrust Distribution Over the Propeller Disk in Relation to Wake-Survey Measurement of Thrust

Description: "Tests were made to investigate the variation of thrust distribution over the propeller disk with angle of pitch of the propeller thrust axis and to determine the disposition and the minimum number of rakes necessary to measure the propeller thrust. The tests were made at a low Mach number for a low and a high blade angle with the propeller operating at three small angles of pitch, and some of the tests were repeated at a higher Mach number. The data obtained show that, for small angles of pitc… more
Date: December 1945
Creator: Pendley, Robert E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Effect of Solidity, Blade Section, and Contravane Angle on the Characteristics of an Axial-Flow Fan

Description: Report presenting an axial flow fan tested with 5, 9, 12, 18, and 24 blades and with two different blade sections. The range of contravane angle and blade angle without contravanes was extended past results published for the same fan previously.
Date: December 1942
Creator: Bell, E. Barton & DeKoster, Lucas J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Effect of Various Surface Conditions on Press Fits of Steel Bushings and 17S-T Aluminum-Alloy Fittings

Description: Report presenting testing of specimens of 17S-T aluminum-alloy fittings with pressed-in steel bushings for various surface conditions. The surface conditions tested included bare surfaces, aonidcal coating and steel cadmium-plate, and one surface treated and the other bare, both without lubrication and with Gredag No. 83 as a lubricant. The calculated coefficients of friction for the various press fits for the investigation ranged from 0.33 for the unlubricated contact of bare steel and aluminu… more
Date: December 1942
Creator: Hartmann, E. C. & Reedy, J. F.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen