National Advisory Committee for Aeronautics (NACA) - 412 Matching Results

Search Results

Results: 1 - 24 next
open access

An 8-Foot Axisymmetrical Fixed Nozzle for Subsonic Mach Numbers Up to 0.99 and for a Supersonic Mach Number of 1.2

Description: From Introduction: "This paper, which should be of interest to those concerned with transonic wind tunnels, covers the design and operating characteristics of the nozzle."
Date: February 23, 1950
Creator: Ritchie, Virgil S.; Wright, Ray H. & Tulin, Marshall P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Additional Experiments With Flat-Top Wing- Body Combinations at High Supersonic Speeds

Description: Memorandum presenting an experimental study of the effects of several variations in configuration geometry on the aerodynamic characteristics of flat-top wing-body combinations. Generally, the configurations consist of one half of a body of revolution mounted beneath a wing of essentially arrow plan form. Results regarding the effect of trailing-edge sweep, effect of the addition of auxiliary bodies, effect of tip-flap deflection, effect of dihedral, effect of leading-edge sweep, effect of fuse… more
Date: February 19, 1957
Creator: Syvertson, Clarence A.; Wong, Thomas J. & Gloria, Hermilo R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Adhesive and protective characteristics of ceramic coating A-417 and its effect on engine life of forged Refractaloy-26 (AMS 5760) and cast stellite 21 (AMS 5385) turbine blades

Description: The adhesive and protective characteristics of National Bureau of Standards Coating A-417 were investigated, as well as the effect of the coating on the life of forged Refractaloy 26 and cast Stellite 21 turbine blades. Coated and uncoated blades were run in a full-scale J33-9 engine and were subjected to simulated service operations consisting of consecutive 20-minute cycles (15 min at rated speed and approximately 5 min at idle). The ceramic coating adhered well to Refractaloy 26 and Stellite… more
Date: February 12, 1953
Creator: Garrett, Floyd B. & Gyorgak, Charles A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Characteristics at High Speeds of Full-Scale Propellers Having Different Shank Designs

Description: "Tests of two 10-foot-diameter two-blade propellers which differed only in shank design have been made in the Langley 16-foot high-speed tunnel. The propellers are designated by their blade design numbers, NACA 10-(5)(08)-03, which had aerodynamically efficient airfoil shank sections, and NACA 10-(5)(08)-03R which had thick cylindrical shank sections typical of conventional blades. The propellers mere tested on a 2000-horsepower dynamometer through a range of blade-angles from 20 degrees to 55 … more
Date: February 13, 1947
Creator: Maynard, Julian D.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic characteristics at transonic speeds of a 69 degree delta wing with a triangular plan-form control having a skewed hinge axis and an overhang balance: transonic-bump method

Description: From Introduction: "Presented in this paper are the results of an investigation of a semispan model of a delta wing with 60^o sweepback at the leading edge which was equipped with a large triangular control having an overhang balance mounted on a skewed hinge axis. The purpose of this investigation was to determine the aerodynamic characteristics of a delta wing with a control which was designed to provide aerodynamic balance at zero control deflection based on the span load distribution of ref… more
Date: February 6, 1951
Creator: Wiley, Harleth G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic characteristics including pressure distribution of a fuselage and three combinations of the fuselage with swept-back wings at high subsonic speeds

Description: From Introduction: "The wings were tested in combination with fuselage similar to the one used in the 7- by 10-foot wind-tunnel investigations. The results are reported herein and are compared with results for three similar model wings on the transonic bump (references 1, 2, and 3)."
Date: February 6, 1951
Creator: Sutton, Fred B. & Martin, Andrew
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Characteristics of a 0.04956-Scale Model of the Convair F-102B Airplane at Mach Numbers of 1.41, 1.61, and 2.01: Coord No. AF-231

Description: Report discussing testing of a scale model of the Convair F-102B to determine its aerodynamic characteristics at several Mach numbers. Four basic body modifications and two afterbody configurations were evaluated.The body modifications were all found to slightly reduce values of minimum drag, but did not cause a change in the static stability and lift-curve-slope values compared to the F-102A.
Date: February 7, 1956
Creator: Driver, Cornelius & Robinson, Ross B.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic characteristics of a flying-boat hull having a length-beam ratio of 15 and a warped forebody

Description: From Introduction: "The results of two phases of this investigation, presented in references 1 and 2, have indicated possible ways of reducing hull drag without causing large changes in aerodynamic stability and hydrodynamic performance."
Date: February 11, 1949
Creator: MacLeod, Richard G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Characteristics of a Wing With Quarter-Chord Line Swept Back 45 Degrees, Aspect Ratio 4, Taper Ratio 0.6, and NACA 65A006 Airfoil Section: Transonic-Bump Method

Description: Report discussing a particular wing-body combination that is part of a larger investigation to determine the lift, drag, pitching moment, and root bending moments for various configurations. Information about the aerodynamic characteristics at the tail plane is also provided.
Date: February 24, 1949
Creator: Weil, Joseph & Goodson, Kenneth W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic characteristics of a wing with quarter-chord line swept back 60 degrees, aspect ratio 2, taper ratio 0.6, and NACA 65A006 airfoil section : transonic bump method

Description: From Introduction: "This paper presents the results of the investigation of the wing-alone and wing-fuselage configurations employing a wing with the quarter-chord line swept back 60^o, aspect ratio 2, taper ratio 0.6, and an NACA 65A006 airfoil section parallel to the free stream."
Date: February 24, 1950
Creator: Myers, Boyd C., II & King, Thomas J., Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic control of supersonic inlets for optimum performance

Description: From Introduction: "The purpose of this paper is to discuss and evaluate some of the input signals or control parameters which have been experimentally employed to operate turbojet inlet-control systems. These include the normal-shock position, the oblique-shock position, and the diffuser-exit Mach number. The discussion is based on results obtained at the NACA Lewis laboratory during control investigations of ram-jet engines (ref. 1 to 5) and during a study on the control of a supersonic inlet… more
Date: February 20, 1956
Creator: Wilcox, Fred A. & Perchonok, Eugene
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic heating of aircraft components

Description: From Introduction: "The purpose of this paper is to review new and significant data which will be of interest to designers in determining the heating of these components. A comparison with existing theory to indicate its adequacy in each case is also presented."
Date: February 14, 1956
Creator: Chauvin, Leo T.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Investigation of a Parabolic Body of Revolution at Mach Number of 1.92 and Some Effects of an Annular Jet Exhausting From the Base

Description: Report discussing an investigation of a parabolic body of revolution with and without the effects of an annular jet exhausting from the base. The aerodynamic characteristics, pressures, lift-curve slope, and other characteristics with the jet in operation and inoperative were compared.
Date: February 8, 1950
Creator: Love, Eugene S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Load Distribution on a 45 Degree Sweptback Wing With Leading-Edge Chord-Extensions at Transonic Speeds, Including Effects of a Spoiler-Slot-Deflector Aileron

Description: Report discussing the aerodynamic loading characteristics of a 45 degree sweptback wing with leading-edge chord extensions, including the effects of a spoiler-slot-deflector aileron. The wing section loading, wing-panel loading, and chord-extension loading are described.
Date: February 20, 1958
Creator: Schmeer, James W.; Whitcomb, Charles F. & West, F. E., Jr.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Loads on an External Store Adjacent to an Unswept Wing at Mach Numbers Between 0.75 and 1.96

Description: Report presenting an investigation to determine the aerodynamic characteristics of a sting-mounted Douglas Aircraft Company store in the presence of an unswept semispan cantilevered wing of aspect ratio 4.0. Results regarding wing loads and store loads are provided.
Date: February 17, 1956
Creator: Hadaway, William M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic Loads on an External Store Adjacent to an Unswept Wing at Mach Numbers Between 0.75 and 1.96

Description: Memorandum presenting an investigation in the blowdown tunnel of the pressure tunnel to determine the aerodynamic characteristics of a sting-mounted Douglas Aircraft Company store in the presence of, but not attached to, an unswept semispan cantilevered wing of aspect ratio 4.0. The influence of the store on the aerodynamic characteristics of the wing was also obtained.
Date: February 17, 1956
Creator: Hadaway, William M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Afterburner Performance With Combustion-Chamber Lengths From 10 to 62 Inches at Several Afterburner-Inlet Temperatures

Description: Effect of variation of combustion chamber length and inlet temperature on low pressure-loss sea level afterburner. A 70-percentage-point reduction in combustion efficiency resulted when the combustion-chamber length was reduced from 62 to 10 inches.
Date: February 1, 1956
Creator: Ciepluch, Carl C.; Velie, Wallace W. & Burley, Richard R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Afterburner performance with combustion-chamber lengths from 10 to 62 inches at several afterburner-inlet temperatures

Description: Report presenting an investigation to determine the effect of variation of afterburner combustion-chamber length and inlet temperature on a low-pressure-loss sea-level afterburner.
Date: February 1956
Creator: Ciepluch, Carl C.; Velie, Wallace W. & Burley, Richard R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Altitude Investigation of Thrust Augmentation Using Water-Alcohol Injection Into the Combustion Chambers of an Axial-Flow Turbojet Engine

Description: From Introduction: "The investigation reported herein, which was conducted in an NACA Lewis altitude test chamber, covered a range of altitudes from 30,000 to 50,000 feet at a flight Mach number of 0.8."
Date: February 12, 1953
Creator: Jansen, E. T. & Renas, P. E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Altitude performance of a full-scale turbojet engine using pentaborane fuels

Description: From Introduction: "The data presented herein include the standard engine performance parameters of net thrust, specific fuel consumption, and engine total-pressure ratio that reflect the performance available from the use of pentaborane as a fuel. The influence of the boric oxide deposits from the high-concentration pentaborane fuels on engine component performance is presented."
Date: February 28, 1957
Creator: Useller, James W.; Kaufman, Warner B. & Jones, William L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Altitude performance of annular combustor type turbojet engine with JFC-2 fuel

Description: An investigation was made comparing the performance of JFC-2 fuel and unleaded, clear gasoline in a 3000-pound-thrust turbojet engine. The JFC-2 fuel was a blend of percent diesel fuel and 25 percent aviation gasoline. Engine combustion efficiency was equal to that obtained with gasoline at rated engine speed and altitudes up to 35,000 feet, but at lower engine speeds or at higher altitudes the JFC-2 fuel gave lower combustion efficiency. No discernible difference was obtained in starting or lo… more
Date: February 5, 1952
Creator: Useller, James W.; Harp, James L., Jr. & Barson, Zelmar
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen