Search Results

open access

Strength of Welded Joints in Tubular Members for Aircraft

Description: "The object of this investigation is to make available to the aircraft industry authoritative information on the strength, weight, and cost of a number of types of welded joints. This information will, also, assist the aeronautics branch in its work of licensing planes by providing data from which the strength of a given joint may be estimated. As very little material on the strength of aircraft welds has been published, it is believed that such tests made by a disinterested governmental labora… more
Date: February 6, 1930
Creator: Whittemore, H. L. & Brueggeman, W. C.
Partner: UNT Libraries Government Documents Department
open access

Hydraulics of Fuel-Injection Pumps for Compression-Ignition Engines

Description: "Formulas are derived for computing the instantaneous pressures delivered by a fuel pump. The first derivation considers the compressibility of the fuel and the second, the compressibility, elasticity, and inertia of the fuel. The second derivation follows that given by Sass; it is shown to be the more accurate of the two. Additional formulas are given for determining the resistance losses in the injection tube" (p. 621).
Date: March 6, 1931
Creator: Rothrock, A. M.
Partner: UNT Libraries Government Documents Department
open access

The Mechanism of Atomization Accompanying Solid Injection

Description: "A brief historical and descriptive account of solid injection is followed by a detailed review of the available theoretical and experimental data that seem to throw light on the mechanism of this form of atomization. It is concluded that this evidence indicates that (1) the atomization accompanying solid injection occurs at the surface of the liquid after it issues as a solid stream from the orifice; and (2) that such atomization has a mechanism physically identical with the atomization which … more
Date: January 6, 1932
Creator: Castleman, R. A., Jr.
Partner: UNT Libraries Government Documents Department
open access

Force measurements on a 1/40-scale model of the U. S. Airship "Akron"

Description: This report describes a series of tests made on a 1/40-scale model of the U. S. Airship "Akron" (ZRS-4) for the purpose of determining the drag, lift, and pitching moments of the bare hull and of the hull equipped with two different sets of fins. Measurements were also made of the elevator forces and hinge moments.
Date: May 6, 1932
Creator: Freeman, Hugh B.
Partner: UNT Libraries Government Documents Department
open access

A photographic study of combustion and knock in a spark-ignition engine

Description: Report presents the results of a photographic study of the combustion in a spark-ignition engine using both Schlieren and flame photographs taken at high rates of speed. Although shock waves are present after knock occurs, there was no evidence of any type of sonic or supersonic compression waves existing in the combustion gases prior to the occurrence of knock. Artificially induced shock waves in the engine did not in themselves cause knock.
Date: December 6, 1937
Creator: Rothrock, A. M. & Spencer, R. C.
Partner: UNT Libraries Government Documents Department
open access

The Compressibility Burble and the Effect of Compressibility on Pressures and Forces Acting on an Airfoil

Description: "Simultaneous air-flow photographs and pressure-distribution measurements were made of the NACA 4412 airfoil at high speeds to determine the physical nature of the compressibility burble. The tests were conducted in the NACA 24-inch high-speed wind tunnel. The flow photographs were obtained by the Schlieren method and the pressures were simultaneously measured for 54 stations in the 5-inch-chord airfoil by means of a multiple-tube manometer. Following the general program, a few measurements of … more
Date: July 6, 1938
Creator: Stack, John; Lindsey, W. F. & Littell, Robert E.
Partner: UNT Libraries Government Documents Department
open access

Air Flow in the Boundary Layer of an Elliptic Cylinder

Description: From Introduction: "The present investigation was carried out for the purpose of supplementing the earlier work with information on the boundary layer under such conditions of air speed and turbulence that transition occurs and the layer is partly laminar and partly turbulent. In the work reported in reference 1, the air speed was about 12 feet per second, and it was assumed that the boundary layer remained in the laminar condition until after separation because the separation point remained fi… more
Date: August 6, 1938
Creator: Schubauer, G. B.
Partner: UNT Libraries Government Documents Department
open access

Determination of the Profile Drag of an Airplane Wing in Flight at High Reynolds Numbers

Description: "Flight tests were made to determine the profile-drag coefficients of a portion of the original wing surface of an all-metal airplane and of a portion of the wing made aerodynamically smooth and more nearly fair than the original section. The wing section was approximately the NACA 2414.5. The tests were carried out over a range of airplane speeds giving a maximum Reynolds number of 15,000,000. Tests were also carried out to locate the point of transition from laminar to turbulent boundary laye… more
Date: January 6, 1939
Creator: Bicknell, Joseph
Partner: UNT Libraries Government Documents Department
open access

Piston temperatures in an air-cooled engine for various operating conditions

Description: As part of a program for the study of piston cooling, this report presents the results of tests conducted on a single-cylinder, air-cooled, carburetor engine to determine the effect of engine operating conditions on the temperatures at five locations on the piston.
Date: April 6, 1940
Creator: Manganiello, Eugene J.
Partner: UNT Libraries Government Documents Department
open access

The NACA high-speed motion-picture camera optical compensation at 40,000 photographs per second

Description: The principle of operation of the NACA high-speed camera is completely explained. This camera, operating at the rate of 40,000 photographs per second, took the photographs presented in numerous NACA reports concerning combustion, preignition, and knock in the spark-ignition engine. Many design details are presented and discussed, details of an entirely conventional nature are omitted. The inherent aberrations of the camera are discussed and partly evaluated. The focal-plane-shutter effect of th… more
Date: November 6, 1945
Creator: Miller, Cearcy D.
Partner: UNT Libraries Government Documents Department
open access

Analysis of Performance of Jet Engine From Characteristics of Components 1: Aerodynamic and Matching Characteristics of Turbine Component Determined With Cold Air

Description: "The performance of the turbine component of an NACA research jet engine was investigated with cold air. The interaction and the matching of the turbine with the NACA eight-stage compressor were computed with the combination considered as a jet engine. The over-all performance of the engine was then determined. The internal aerodynamics were studied to the extent of investigating the performance of the first stator ring and its influence on the turbine performance" (p. 397).
Date: June 6, 1947
Creator: Goldstein, Arthur W.
Partner: UNT Libraries Government Documents Department
open access

Stability derivatives of triangular wings at supersonic speeds

Description: "The analysis of the stability derivatives of low-aspect-ratio triangular wings at subsonic and supersonic speeds, given in NACA TN no. 1423, is extended to apply to triangular wings having large vertex angles and traveling at supersonic speeds. The lift, rolling moment due to sideslip, and damping in roll and pitch for this more general case have been treated elsewhere on the basis of the theory of small disturbances. The surface potentials for angle of attack and rolling taken therefrom are u… more
Date: November 6, 1947
Creator: Ribner, Herbert S. & Malvestuto, Frank S., Jr.
Partner: UNT Libraries Government Documents Department
open access

Aerodynamic characteristics at high speeds of related full-scale propellers having different blade-section cambers

Description: From Summary: "Wind-tunnel tests of a full-scale two-blade NACA 10-(10)(08)-03 (high camber) propeller have been made for a range of blade angles from 20 degrees to 55 degrees at airspeeds up to 500 miles per hour. The results of these tests have been compared with results from previous tests of the NACA 10-(3) (08)-03 (low camber) and NACA 10-(5)(08)-03 (medium camber) propellers to evaluate the effects of blade-section camber on propeller aerodynamic characteristics."
Date: May 6, 1948
Creator: Maynard, Julian D. & Salters, Leland B., Jr.
Partner: UNT Libraries Government Documents Department
open access

Effect of aspect ratio on the air forces and moments of harmonically oscillating thin rectangular wings in supersonic potential flow

Description: This report treats the effect of aspect ratio on the air forces and moments of an oscillating flat rectangular wing in supersonic potential flow. The linearized velocity potential for the wing undergoing sinusoidal torsional oscillations simultaneously with sinusoidal vertical translations is derived in the form of a power series in terms of a frequency parameter. The series development is such that the differential equation for the velocity potential is satisfied to the required power of the f… more
Date: January 6, 1950
Creator: Watkins, Charles E.
Partner: UNT Libraries Government Documents Department
open access

Displacement Effect of a Three-Dimensional Boundary Layer

Description: "A method is described for determining the "displacement surface" of known three-dimensional compressible boundary-layer flow in terms of the mass-flow defects associated with the profiles of the two velocity components parallel to the surface. The result is a generalization of the plane flow concept of displacement thickness introduced in order to describe how a thin boundary layer distorts the outer nonviscous flow. Numerical values are found for the known three-dimensional boundary-layer flo… more
Date: March 6, 1952
Creator: Moore, Franklin K.
Partner: UNT Libraries Government Documents Department
open access

Theoretical and experimental investigation of mufflers with comments on engine-exhaust muffler design

Description: Equations are presented for the attenuation characteristics of single-chamber and multiple-chamber mufflers of both the expansion-chamber and resonator types, for tuned side-branch tubes, and for the combination of an expansion chamber with a resonator. Experimental curves of attenuation plotted against frequency are presented for 77 different mufflers with a reflection-free tailpipe termination. The experiments were made at room temperature without flow; the sound source was a loud-speaker. A … more
Date: October 6, 1952
Creator: Davis, Don D., Jr.; Stokes, George M.; Moore, Dewey & Stevens, George L., Jr.
Partner: UNT Libraries Government Documents Department
open access

A Thermal Equation for Flame Quenching

Description: "An approximate thermal equation was derived for quenching distance based on a previously proposed diffusional treatment. The quenching distance was expressed in terms of the thermal conductivity, the fuel mole fraction, the heat capacity, the rate of the rate-controlling chemical reaction, a constant that depends on the geometry of the quenching surface, and one empirical constant. The effect of pressure on quenching distance was shown to be inversely proportional to the pressure dependence of… more
Date: December 6, 1954
Creator: Potter, A. E., Jr. & Berlad, A. L.
Partner: UNT Libraries Government Documents Department
open access

Incompressible Flutter Characteristics of Representative Aircraft Wings

Description: "This report gives the results of a detailed study of the flutter characteristics of four representative aircraft wings. This study was made using the electric-analog computer at the California Institute of Technology. During the course of this investigation eight important parameters of each wing were varied and, in addition, the effects of mass, inertia, pitching spring, and location of a concentrated mass were investigated for all four wings and at several sweepback angles" (p. 1385).
Date: June 6, 1955
Creator: Wilts, C. H.
Partner: UNT Libraries Government Documents Department
open access

Theoretical span load distributions and rolling moments for sideslipping wings of arbitrary plan form in incompressible flow

Description: From Summary: "A method of computing span loads and the resulting rolling moments for sideslipping wings of arbitrary plan form in incompressible flow is derived. The method requires that the span load at zero sideslip be known for the wing under consideration. Because this information is available for a variety of wings, this requirement should not seriously restrict the application of the present method. The basic method derived herein requires a mechanical differentiation and integration to … more
Date: October 6, 1955
Creator: Queijo, M. J.
Partner: UNT Libraries Government Documents Department
open access

Experimental determination of effects of frequency and amplitude on the lateral stability derivatives for a delta, a swept, and unswept wing oscillating in yaw

Description: "Three wing models were oscillated in yaw about their vertical axes to determine the effects of systematic variations of frequency and amplitude of oscillation on the in-phase and out-of-phase combination lateral stability derivatives resulting from this motion. The tests were made at low speeds for a 60 degree delta wing, a 45 degree swept wing, and an unswept wing; the swept and unswept wings had aspect ratios of 4. The results indicate that large changes in the magnitude of the stability der… more
Date: January 6, 1956
Creator: Fisher, Lewis R.
Partner: UNT Libraries Government Documents Department
open access

Theoretical calculation of the power spectra of the rolling and yawing moments on a wing in random turbulence

Description: The correlation functions and power spectra of the rolling and yawing moments on an airplane wing due to the three components of continuous random turbulence are calculated. The rolling moments to the longitudinal (horizontal) and normal (vertical) components depend on the spanwise distributions of instantaneous gust intensity, which are taken into account by using the inherent properties of symmetry of isotropic turbulence. The results consist of expressions for correlation functions or spectr… more
Date: September 6, 1956
Creator: Eggleston, John M. & Diederich, Franklin W.
Partner: UNT Libraries Government Documents Department
open access

Area-Suction Boundary-Layer Control as Applied to the Trailing-Edge Flaps of a 35 Degree Swept-Wing Airplane

Description: "A wind-tunnel investigation was made to determine the effects on the aerodynamic characteristics of a 35 degree swept-wing airplane of applying area-suction boundary-layer control to the trailing-edge flaps. Flight tests of a similar airplane were then conducted to determine the effect of boundary-layer control in the handling qualities and operation of the airplane, particularly during landing. The wind-tunnel and flight tests indicated that area suction applied to the trailing-edge flaps pro… more
Date: May 6, 1958
Creator: Cook, Woodrow L.; Anderson, Seth B. & Cooper, George E.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen