ALE3D Rolling Simulations

PDF Version Also Available for Download.

Description

Hot rolling is a problem involving large deformations during the process of turning an ingot into a thin sheet. As a result of the large deformations inherent in the process, significant amounts of energy are put into the ingot mechanically, most of which results in heat generation. Therefore, in order to predict the results of rolling both the mechanical and the thermal factors must accurately represent the real conditions. The factors which must be properly tuned include interface friction, mass scaling to decrease computation times, heat transfer at the interface, convective heat transfer from the ingot, and convective heat transfer ... continued below

Physical Description

PDF-file: 24 pages; size: 1 Mbytes

Creation Information

Riordan, T July 27, 2006.

Context

This report is part of the collection entitled: Office of Scientific & Technical Information Technical Reports and was provided by UNT Libraries Government Documents Department to Digital Library, a digital repository hosted by the UNT Libraries. More information about this report can be viewed below.

Who

People and organizations associated with either the creation of this report or its content.

Author

Publisher

Provided By

UNT Libraries Government Documents Department

Serving as both a federal and a state depository library, the UNT Libraries Government Documents Department maintains millions of items in a variety of formats. The department is a member of the FDLP Content Partnerships Program and an Affiliated Archive of the National Archives.

Contact Us

What

Descriptive information to help identify this report. Follow the links below to find similar items on the Digital Library.

Description

Hot rolling is a problem involving large deformations during the process of turning an ingot into a thin sheet. As a result of the large deformations inherent in the process, significant amounts of energy are put into the ingot mechanically, most of which results in heat generation. Therefore, in order to predict the results of rolling both the mechanical and the thermal factors must accurately represent the real conditions. The factors which must be properly tuned include interface friction, mass scaling to decrease computation times, heat transfer at the interface, convective heat transfer from the ingot, and convective heat transfer from the roll. Since these parameters are generally not measurable the correct values must be derived by tuning the parameters so that solutions match some other measurable result. The interface friction will be tuned using an ALE3D input deck which has been set up to output the torque applied to the roll during the pass. The friction coefficient will be adjusted so that the computed torque matches the measured value. The various heat transfer coefficients are dependent on each other, and are tuned based on measured roll surface temperatures, ingot exit temperatures, and the energy input through the mechanical deformation of the ingot. The heat transfer coefficient at the interface has been found to be approximately 1.25 x 10{sup 5} W/m{sup 2}K, based on estimates of how much heat can be taken from the roll surface by coolant and matching a roll surface temperature. The convection coefficient on the ingot surface has been assumed to be 100 W/m{sup 2}K, on the high end for convection to air. However, this convection coefficient is low enough that the ingot should cool uniformly through its thickness as it would with a lower convection coefficient. Also necessary in accurate modeling is a good description of material behavior. In order to aid the development of an accurate material model an ALE3D input deck which simulates compression tests with temperature gradients has been developed. The model output engineering stress-strain curves which can be compared to the experimentally collected data. Also, comparisons of the deformed shapes can be made. The model has been tuned using MTS parameters for AA 5182 and will be ready for use when parameters for AA 2024 are experimentally developed. Currently, more work is needed to properly tune all the model parameters. A parameterized three dimensional geometry and mesh has been created so that once the parameters are tuned the transition to three dimensional simulations should be quick.

Physical Description

PDF-file: 24 pages; size: 1 Mbytes

Language

Item Type

Identifier

Unique identifying numbers for this report in the Digital Library or other systems.

  • Report No.: UCRL-TR-223365
  • Grant Number: W-7405-ENG-48
  • DOI: 10.2172/898476 | External Link
  • Office of Scientific & Technical Information Report Number: 898476
  • Archival Resource Key: ark:/67531/metadc887395

Collections

This report is part of the following collection of related materials.

Office of Scientific & Technical Information Technical Reports

Reports, articles and other documents harvested from the Office of Scientific and Technical Information.

Office of Scientific and Technical Information (OSTI) is the Department of Energy (DOE) office that collects, preserves, and disseminates DOE-sponsored research and development (R&D) results that are the outcomes of R&D projects or other funded activities at DOE labs and facilities nationwide and grantees at universities and other institutions.

What responsibilities do I have when using this report?

When

Dates and time periods associated with this report.

Creation Date

  • July 27, 2006

Added to The UNT Digital Library

  • Sept. 22, 2016, 2:13 a.m.

Description Last Updated

  • Dec. 2, 2016, 7:13 p.m.

Usage Statistics

When was this report last used?

Congratulations! It looks like you are the first person to view this item online.

Interact With This Report

Here are some suggestions for what to do next.

Start Reading

PDF Version Also Available for Download.

Citations, Rights, Re-Use

Riordan, T. ALE3D Rolling Simulations, report, July 27, 2006; Livermore, California. (digital.library.unt.edu/ark:/67531/metadc887395/: accessed December 18, 2017), University of North Texas Libraries, Digital Library, digital.library.unt.edu; crediting UNT Libraries Government Documents Department.