Selected components from a staianless steel nonregenerative heat exchanger removed from the U.S.S. Nautilus (SSN571) have been examined for evidence of stress-corrosion cracking. The examination was conducted on three baffle plates, all primary-face seal welds, and the tubes and the surrounding tube sheets of 7 out of a total of 35 tubes. Maximum operating temperature of the heat exchanger was 260 ction prod- F for the inlet primary water and 164 ction prod- F for the exit secondary water. Chloride content of the secondary water averaged 5 ppm, with a maximum of 15 ppm. Only one suspected stress-corrosion crack was …
continued below
Publisher Info:
Battelle Memorial Inst., Columbus, Ohio
Place of Publication:
Columbus, Ohio
Provided By
UNT Libraries Government Documents Department
Serving as both a federal and a state depository library, the UNT Libraries Government Documents Department maintains millions of items in a variety of formats. The department is a member of the FDLP Content Partnerships Program and an Affiliated Archive of the National Archives.
Descriptive information to help identify this report.
Follow the links below to find similar items on the Digital Library.
Description
Selected components from a staianless steel nonregenerative heat exchanger removed from the U.S.S. Nautilus (SSN571) have been examined for evidence of stress-corrosion cracking. The examination was conducted on three baffle plates, all primary-face seal welds, and the tubes and the surrounding tube sheets of 7 out of a total of 35 tubes. Maximum operating temperature of the heat exchanger was 260 ction prod- F for the inlet primary water and 164 ction prod- F for the exit secondary water. Chloride content of the secondary water averaged 5 ppm, with a maximum of 15 ppm. Only one suspected stress-corrosion crack was found in the components normally in contact with the secondary water. The crack, 2.5 mils in depth, was located on a fully exposed tube. At the 95 per cent confidence level this represented a probability of finding cracking on fully exposed surfaces in 0 to 60 per cent of the rest of the tubes in the heat exchanger. Severe stress-corrosion cracking was found in tubes in the tube-sheet drain area at the juncture with the inner tube sheet at the inlet end, where secondary water seeped past the expanded tubes. Cracks were detected in five of seven tubes for a statistical probability of 25 to 96 per cent at the 95 per cent confidence level. Maximum depth of cracks was 28 mils or 80 per cent penetration of the 35-mil-thick tubing wall. Stress-corrosion cracks also were found around several holes on the drain-side tube-sheet surfaces at the inlet end. Maximum depth was 12 mils, which did not seriously threaten penetration of the 9/16-in.-thick tube sheet. Cracks were detected in 5 of 35 primary-face seal welds at the inlet end and in 11 of 35 at the outlet end. This behavior was attributed to hot-short cracking of the Type 347 stainless steel weldments rather than to stress corrosion. (auth)
This report is part of the following collection of related materials.
Office of Scientific & Technical Information Technical Reports
Reports, articles and other documents harvested from the Office of Scientific and Technical Information.
Office of Scientific and Technical Information (OSTI) is the Department of Energy (DOE) office that collects, preserves, and disseminates DOE-sponsored research and development (R&D) results that are the outcomes of R&D projects or other funded activities at DOE labs and facilities nationwide and grantees at universities and other institutions.
Berry, W. E.; Stewart, O. M. & Fink, F. W.Examination of a Nonregenerative Heat Exchanger From the u.s.s. Nautilus (Ssn-571),
report,
February 19, 1960;
Columbus, Ohio.
(https://digital.library.unt.edu/ark:/67531/metadc869317/:
accessed April 28, 2025),
University of North Texas Libraries, UNT Digital Library, https://digital.library.unt.edu;
crediting UNT Libraries Government Documents Department.