D0 Silicon Upgrade: Muon Shield Conceptual Design Report

PDF Version Also Available for Download.

Description

The nominal overall dimensions are 71-inch high x 71-inch wide x 144-inch long and has a 25-inch square hole throughout. The shield consists of three different materials, steel (inner most section), polycarbonate (central section) and lead (outer most section). The material thicknesses are, steel=15-inch, poly=6-inch and lead=2-inch. The estimated weight is {approx}69 tons. The shield is centered about the Tev beam line and the 25-inch square hole provides clearance to the low Beta quad, which is nominally 20-inch square. During beamline operation, the shield is in contact with Samus magnet core at the detector end and with the Main Ring ... continued below

Physical Description

6 pages

Creation Information

Stredde, Herman J. May 14, 1996.

Context

This report is part of the collection entitled: Office of Scientific & Technical Information Technical Reports and was provided by UNT Libraries Government Documents Department to Digital Library, a digital repository hosted by the UNT Libraries. More information about this report can be viewed below.

Who

People and organizations associated with either the creation of this report or its content.

Author

Publisher

Provided By

UNT Libraries Government Documents Department

Serving as both a federal and a state depository library, the UNT Libraries Government Documents Department maintains millions of items in a variety of formats. The department is a member of the FDLP Content Partnerships Program and an Affiliated Archive of the National Archives.

Contact Us

What

Descriptive information to help identify this report. Follow the links below to find similar items on the Digital Library.

Description

The nominal overall dimensions are 71-inch high x 71-inch wide x 144-inch long and has a 25-inch square hole throughout. The shield consists of three different materials, steel (inner most section), polycarbonate (central section) and lead (outer most section). The material thicknesses are, steel=15-inch, poly=6-inch and lead=2-inch. The estimated weight is {approx}69 tons. The shield is centered about the Tev beam line and the 25-inch square hole provides clearance to the low Beta quad, which is nominally 20-inch square. During beamline operation, the shield is in contact with Samus magnet core at the detector end and with the Main Ring shield wall on the MR side (with some small clearance {approx}2-inch-3-inch). The need for the clearance will be discussed later. The shield support structure consists steel structural members appropriately sized for loads encountered in the design. The structure must not only support the shield but, must be designed for rolling the entire assembly into position in the collision hall. It must provide for cylinders to lift the assembly, Hilman rollers and also connections for moving the entire assembly. The movement is considered to be similar to that with which the calorimeters were moved from the clean room to the sidewalk staging area, i.e. hydraulic cylinder and chain (see dwg. 3740.000-ME294017,3 sheets). This method will be used for the East to West motion and a hydraulic scheme will be used for any North-South motion. Since the shield is 144-inch long and the sidewalk structural support is {approx}96-inch, there is a section of the shield that is cantilevered (48-inch). Further, the EF toroid must open {approx}40+ inch for access to the detector during operations and this requires that the shield or some part of it must also move. This conceptual design suggests that the shield be designed in two pieces axially. These two pieces are identical in cross section but, the lengths are divided into 48-inch nearest EF and 96-inch nearest the MR tunnel. The 96-inch section is designed to clam shell, i.e. split vertically along the beam line, with each half moving {approx}36-inch East/West. The opening created with this motion (72-inch) is 1-inch greater than the width of the shield, 71 If. Now the forward section can be moved, North/South, within the opened end section, a full 48-inch. The forward section will be support at one end by the basic shield support structure and at the EF end by a member welded to EF. Rails will be extended from the basic structure to EF and these rails will be collapsible within the basic structure. The shield sections will be mounted on Hilman rollers and all motions will be provided by hydraulic cylinders.

Physical Description

6 pages

Language

Item Type

Identifier

Unique identifying numbers for this report in the Digital Library or other systems.

  • Report No.: FERMILAB-D0-EN-446
  • Grant Number: AC02-07CH11359
  • DOI: 10.2172/1033285 | External Link
  • Office of Scientific & Technical Information Report Number: 1033285
  • Archival Resource Key: ark:/67531/metadc841244

Collections

This report is part of the following collection of related materials.

Office of Scientific & Technical Information Technical Reports

Reports, articles and other documents harvested from the Office of Scientific and Technical Information.

Office of Scientific and Technical Information (OSTI) is the Department of Energy (DOE) office that collects, preserves, and disseminates DOE-sponsored research and development (R&D) results that are the outcomes of R&D projects or other funded activities at DOE labs and facilities nationwide and grantees at universities and other institutions.

What responsibilities do I have when using this report?

When

Dates and time periods associated with this report.

Creation Date

  • May 14, 1996

Added to The UNT Digital Library

  • May 19, 2016, 3:16 p.m.

Description Last Updated

  • Aug. 30, 2016, 4:09 p.m.

Usage Statistics

When was this report last used?

Yesterday: 0
Past 30 days: 0
Total Uses: 4

Interact With This Report

Here are some suggestions for what to do next.

Start Reading

PDF Version Also Available for Download.

International Image Interoperability Framework

IIF Logo

We support the IIIF Presentation API

Stredde, Herman J. D0 Silicon Upgrade: Muon Shield Conceptual Design Report, report, May 14, 1996; Batavia, Illinois. (digital.library.unt.edu/ark:/67531/metadc841244/: accessed June 19, 2018), University of North Texas Libraries, Digital Library, digital.library.unt.edu; crediting UNT Libraries Government Documents Department.