An APFIM and TEM study of Ni{sub 4}Mo precipitation in a commercial Ni-28% Mo-1.4% Fe-0.4% Cr wt. % alloy

PDF Version Also Available for Download.

Description

Ni-Mo alloys containing at least 26 wt.% Mo have a negligible corrosion rate in boiling 10% hydrochloric acid and are therefore used in corrosive environments. A series of commercial Ni-Mo alloys has been developed with subtle variations in chemical composition. These alloys usually contain {approximately} 28 wt.% Mo with additions of up to 5% Fe and Cr. A significant amount of research has been performed to understand the microstructure and properties of these alloys, although most of the effort has concentrated on the Ni-Mo binary system. In some alloys with low Fe and Cr contents, a severe embrittlement problem has ... continued below

Physical Description

4 p.

Creation Information

Thomson, R.C.; Brown, N.; Bates, J.S.; Russell, K.F. & Miller, M.K. February 1, 1998.

Context

This report is part of the collection entitled: Office of Scientific & Technical Information Technical Reports and was provided by UNT Libraries Government Documents Department to Digital Library, a digital repository hosted by the UNT Libraries. More information about this report can be viewed below.

Who

People and organizations associated with either the creation of this report or its content.

Authors

Sponsor

Publisher

Provided By

UNT Libraries Government Documents Department

Serving as both a federal and a state depository library, the UNT Libraries Government Documents Department maintains millions of items in a variety of formats. The department is a member of the FDLP Content Partnerships Program and an Affiliated Archive of the National Archives.

Contact Us

What

Descriptive information to help identify this report. Follow the links below to find similar items on the Digital Library.

Description

Ni-Mo alloys containing at least 26 wt.% Mo have a negligible corrosion rate in boiling 10% hydrochloric acid and are therefore used in corrosive environments. A series of commercial Ni-Mo alloys has been developed with subtle variations in chemical composition. These alloys usually contain {approximately} 28 wt.% Mo with additions of up to 5% Fe and Cr. A significant amount of research has been performed to understand the microstructure and properties of these alloys, although most of the effort has concentrated on the Ni-Mo binary system. In some alloys with low Fe and Cr contents, a severe embrittlement problem has been observed due to the formation of the Ni{sub 4}Mo (D1{sub a}-ordered) phase within the microstructure. This research focuses on a commercial alloy with nominal composition Ni-28% Mo-1.4% Fe-0.4% Cr-0.1% Mn-0.003 wt.% C. The material supplied was a heat treatment coupon which had been attached to a large vessel during fabrication. Assessment of the chemical analysis of the alloy suggested that detrimental phases could be present or might appear during subsequent repair work. Therefore, it was important to assess the microstructural condition of the vessel, and in particular the kinetics of precipitation of Ni{sub 4}Mo.

Physical Description

4 p.

Notes

OSTI as DE98005021

Source

  • Microscopy and microanalysis 1998, Atlanta, GA (United States), 12-16 Jul 1998

Language

Item Type

Identifier

Unique identifying numbers for this report in the Digital Library or other systems.

  • Other: DE98005021
  • Report No.: ORNL/CP--96510
  • Report No.: CONF-980713--
  • Grant Number: AC05-96OR22464;AC05-76OR00033
  • DOI: 10.2172/650361 | External Link
  • Office of Scientific & Technical Information Report Number: 650361
  • Archival Resource Key: ark:/67531/metadc706475

Collections

This report is part of the following collection of related materials.

Office of Scientific & Technical Information Technical Reports

Reports, articles and other documents harvested from the Office of Scientific and Technical Information.

Office of Scientific and Technical Information (OSTI) is the Department of Energy (DOE) office that collects, preserves, and disseminates DOE-sponsored research and development (R&D) results that are the outcomes of R&D projects or other funded activities at DOE labs and facilities nationwide and grantees at universities and other institutions.

What responsibilities do I have when using this report?

When

Dates and time periods associated with this report.

Creation Date

  • February 1, 1998

Added to The UNT Digital Library

  • Sept. 12, 2015, 6:31 a.m.

Description Last Updated

  • Jan. 15, 2016, 12:45 p.m.

Usage Statistics

When was this report last used?

Yesterday: 1
Past 30 days: 1
Total Uses: 5

Interact With This Report

Here are some suggestions for what to do next.

Start Reading

PDF Version Also Available for Download.

Citations, Rights, Re-Use

Thomson, R.C.; Brown, N.; Bates, J.S.; Russell, K.F. & Miller, M.K. An APFIM and TEM study of Ni{sub 4}Mo precipitation in a commercial Ni-28% Mo-1.4% Fe-0.4% Cr wt. % alloy, report, February 1, 1998; Tennessee. (digital.library.unt.edu/ark:/67531/metadc706475/: accessed April 21, 2018), University of North Texas Libraries, Digital Library, digital.library.unt.edu; crediting UNT Libraries Government Documents Department.