Measurement of process-induced strains in composite materials using embedded fiber optic sensors Page: 11 of 11
This report is part of the collection entitled: Office of Scientific & Technical Information Technical Reports and was provided to UNT Digital Library by the UNT Libraries Government Documents Department.
Extracted Text
The following text was automatically extracted from the image on this page using optical character recognition software:
7.0 References
1. White, S.R., and Hahn, H.T., "Process Modeling of Composite Materials: Residual Stress Development Dur-
ing Cure. Part I. Model Formulation," Journal of Composite Materials, Vol. 26, No. 16, 1992, pp. 2402-2422.
2. Fenn, R.H., Jones, A.M., and Wells, G.M., "X-Ray Diffraction Investigation of Triaxial Residual Stresses in
Composite Materials," Journal of Composite Materials, Vol. 27, No. 14, 1993, pp. 1338-1351.
3. Kupperman, D.S., Majumdar, S., and Singh, J.P., "Neutron Diffraction NDE for Advanced Composites," Jour-
nal of Engineering Materials and Technology, Vol. 112, April 1990, pp. 198-201.
4. Nairn, J.A., and Zoller, P., "Matrix Solidification and the Resulting Residual Thermal Stresses in Composites,"
Journal of Material Science, Vol. 20, 1985, pp. 355-367.
5. Galiotis, G., Melanitis, N., Batchelder, D.N., Robinson, I.M., and Peacock, J.A., "Residual Strain Mapping in
Carbon Fibre/PEEK Composites" Composites, Vol. 19, No. 4, July 1988, pp. 321-324.
6. Ma, Q., and Clarke, D.R., "Measurement of Residual Stresses in Sapphire Fiber Composites using Optical Flu-
orescence," Acta Metallurgical Material, Vol. 41, No. 6, 1993, pp. 1817-1823.
7. Daniel, I.M., Liber, T., and Chamis, C.C., "Measurement of Residual Strains in Boron-Epoxy and Glass-Epoxy
Laminates," Composites Reliability, ASTM STP 580, American Society for Testing and Materials, 1975, p.
340-351.
8. Udd, E., Editor, Fiber Optic Smart Structures, Wiley, New York, 1995.
9. Butter, C.D. and Hocker, G.B., "Fiber optics strain gauge," Applied Optics, Vol. 17, No. 18, September 1978,
pp. 2867-2869.
10. Udd, E., Editor, Fiber Optic Sensors: An Introduction for Engineers and Scientists, Wiley, New York, 1991.
11. Carman, G.P., and Sendeckyj, G.P, "Review of the mechanics of embedded optical sensors," Journal of Com-
posites Technology & Research, JCTRER, Vol. 17, No. 3, July 1995, pp. 183-193.
12. Miller, Mark S., et al. "Validation of axial strain transfer from a composite laminate to embedded optical fiber
sensors," SPIE Vol. 1798, Fiber Optic Smart Structures and Skins V 1992, pp. 19-29.
13. Morey, W.W., "Fiber optic grating technology," SPIE Vol. 2574, Pacific Northwest Fiber Optic Sensor Work-
shop, 1995, pp. 22-31.
14. Lawrence, C.M., and Nelson, D.V., "Validation of the absolute extrinsic Fabry-Perot interferometer for strain
measurements," SPIE Vol. 2575, Pacific Northwest Fiber Optic Sensor Workshop, 1995, pp. 32-39.
15. White, S.R., and Hahn, H.T., "Process modeling of composite materials: residual stress development during
cure. Part II. Experimental validation," Journal of Composite Materials, Vol. 26, No. 16, 1992, pp. 2423-2453.
16. Daniel, I.M., and Liber, T., "Effect of laminate construction on residual stresses in graphite/polyimide compos-
ites," Experimental Mechanics, Vol. 17, January 1977, pp. 21-25.
17. Udd, E., Nelson, D.V., Lawrence, C.M., Spingarn, J.R., Ferguson, B.A., "Three axis strain plus temperature
fiber optic grating sensor," to be published in SPIE Vol. 2718.
DISCLAIMER
This report was prepared as an account of work sponsored by an agency of the United States
Government. Neither the United States Government nor any agency thereof, nor any of their
employees, makes any warranty, express or implied, or assumes any legal liability or responsi-
bility for the accuracy, completeness, or usefulness of any information, apparatus, product, or
process disclosed, or represents that its use would not infringe privately owned rights. Refer-
ence herein to any specific commercial product, process, or service by trade name, trademark,
manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recom-
mendation, or favoring by the United States Government or any agency thereof. The views
and opinions of authors expressed herein do not necessarily state or reflect those of the
United States Government or any agency thereof.
Search Inside
This report can be searched. Note: Results may vary based on the legibility of text within the document.
Tools / Downloads
Get a copy of this page or view the extracted text.
Citing and Sharing
Basic information for referencing this web page. We also provide extended guidance on usage rights, references, copying or embedding.
Reference the current page of this Report.
Lawrence, C.M.; Nelson, D.V.; Spingarn, J.R. & Bennett, T.E. Measurement of process-induced strains in composite materials using embedded fiber optic sensors, report, May 1, 1996; Livermore, California. (https://digital.library.unt.edu/ark:/67531/metadc667412/m1/11/: accessed April 19, 2024), University of North Texas Libraries, UNT Digital Library, https://digital.library.unt.edu; crediting UNT Libraries Government Documents Department.