The reactor equipment cell is expected to be completed by February 15. While filled with water, the tank was inspected for leaks, and the few leaks found will have been repaired by February 15. All orders for construction materials placed prior to this quarter have been received. New requisitions issued during the quarter total $16,000. Work orders were issued, and fabrication of all low-pressure-system components was begun in the ORNL shops. The thermal shield around the reactor vessel was specified as a 2-ft-thick cylindrical concrete wall. With this shield, the fast-neutron flux in the equipment area will be reduced to …
continued below
We've identified this
report
as a primary source within our collections. Researchers, educators, and students may find this report useful in their work.
Provided By
UNT Libraries Government Documents Department
Serving as both a federal and a state depository library, the UNT Libraries Government Documents Department maintains millions of items in a variety of formats. The department is a member of the FDLP Content Partnerships Program and an Affiliated Archive of the National Archives.
Added Title:
Oak Ridge National Laboratory Report ORNL-1853
Description
The reactor equipment cell is expected to be completed by February 15. While filled with water, the tank was inspected for leaks, and the few leaks found will have been repaired by February 15. All orders for construction materials placed prior to this quarter have been received. New requisitions issued during the quarter total $16,000. Work orders were issued, and fabrication of all low-pressure-system components was begun in the ORNL shops. The thermal shield around the reactor vessel was specified as a 2-ft-thick cylindrical concrete wall. With this shield, the fast-neutron flux in the equipment area will be reduced to 7 x 109 neutrons/cm2/sec, the slow flux to 4 x 107 neutrons/cm2/sec, and the gamma intensity to less than 105 r/hr. The possible blast effects from a rupture of the pressure vessel were studied and are judged to be sufficient to justify the inclusion of a 1.5. to 2-in.-thick blast shield around the pressure vessel. The blast shield eliminates the danger of damaging the leak tight equipment-cell liner. Pressures in the reactor equipment cell, as a result of vessel failure, were calculated in order to arrive at a safe design pressure for the reactor equipment cell. For the case of instantaneous release of the core and pressure-vessel liquids and release of the heat-exchanger liquids through 6-in. steam lines, a maximum cell pressure of 29 psig is expected. A study was made of the problem of uranium peroxide precipitation at places where the reactor solution is cooled soon after leaving the reactor core. A curve is presented to show the temperatures, for various decay times, at which the peroxide might form.
Notes
Digitized from microopaque cards (7).
"Date received by Information and Reports Division (February 16, 1955)."
This report is part of the following collections of related materials.
TRAIL Microcard Collection
Imaged from microcard, these technical reports describe research performed for U.S. government agencies from the 1930s to the 1960s. The reports were provided by the Technical Report Archive and Image Library (TRAIL).
The Technical Report Archive & Image Library (TRAIL) identifies, acquires, catalogs, digitizes and provides unrestricted access to U.S. government agency technical reports. The mission of TRAIL is to ensure preservation, discoverability, and persistent open access to government technical publications regardless of form or format.
McDuffie, H. F. & Kelly, D. C.Homogenous Reactor Project Quarterly Progress Report For Period Ending January 31, 1955,
report,
April 6, 1955;
Washington D.C..
(https://digital.library.unt.edu/ark:/67531/metadc1956978/:
accessed April 15, 2026),
University of North Texas Libraries, UNT Digital Library, https://digital.library.unt.edu;
crediting UNT Libraries Government Documents Department.