Contributions to the Data on Theoretical Metallurgy: [Part] 11. Entropies of Inorganic Substances: Revision (1948) of Data and Methods of Calculation Page: 52
The following text was automatically extracted from the image on this page using optical character recognition software:
52 CONTRIBUTIONS TO DATA ON THEORETICAL METALLURGY
From spectroscopic data, Giauque and Wiebe compute Ss98.16=
49.4, in agreement with their third-law value. Murphy (367) more
recently has calculated the entropy from molecular-constant data,
I~4.30X 10-40 and w= 2,270. Their result, which has been corrected
for differences in natural constants, is S298.16=49.33 +0.05. This
value is adopted.
Blagg and Murphy (44) computed the entropy of DI (g) from molec-
ular-constant data corresponding to I=8.4X 10-40 and w= 1,620.
Evidently some mistake was made, as they obtain an impossibly
low value in comparison with that for HI (g). Repetition of the
calculation yields S298.1-= 50.69 0.05, which is higher than the value
for HI (g) by the anticipated amount.
Azide.-Eyster and Gillette (157) have computed the entropy of
HN3 (g) from the moments of inertia, 1,=70.75X 10-40, 12=69.38X
10-40, and 13=1.376X10-40, and the vibration frequencies, 658, 739,
1,152, 1,269, 2,140, and 3,336 cm.-' Repetition of the calculation
leads to St+r,298.16= 56.06, S,298.16=0.70, and S98.16= 56.8 0.3.
Cyanide.-The heat capacity of HCN was measured by Giauque
and Ruehrwein (185) (140-3000). Their calculations, which have
been checked, are S5.0o=0.13 (extrapolation), S159.8-S5.0= 16.77
(crystals, less abnormal heat absorption near 170.370), AS170.37=
3.8/170.37= 0.02 (abnormal heat absorption), AS259 .=- 2,009/259.86 =
7.73 (fusion), S9.80-S59.86= 2.36 (liquid), AS298.80= 6,027/298.80=
20.17 (vaporization at 1 atm. pressure), AS298.80=0.03 (correction to
ideal gas state), and AS298.80=0.73 (correction for polymerization).
The sum is S29s.80=47.94 for HCN (g). The value for 298.160 is 0.02
less, or S298.16=47.920.2. It also is evident that Sls.so0=27.01 for
HCN (1), which corresponds to S2~98,.= 26.970.10. The values
for HCN (1) apply to the equilibrium mixture of polymers.
From molecular-constant values, 1=18.72 X 10-40, 1= 2,089 (1),
w2=712 (2), and wo3=3,313 (1), which were reported by Bartunek and
Barker (38) and used by Giauque and Ruehrwein (185), there are
computed Str, 298.16=47.615, S, 298s.18=0.586, and S98.,6= 48.200.10
for HCN (g). This value from molecular-constant data is adopted.
Giauque and Ruehrwein obtained S98.1=48.23; Badger and Woo (34)
obtained S398.2=48.23; and Gordon (198) obtained Ss9.16=48.29.
From molecular-constant values given by Bartunek and Barker
(38) and Crawford and Brinkley (113), I=22.92 X 10-40, w = 1,906 (1),
2= 569 (2), and o= 2,630 (1), there are obtained S+7,298. 648.126,
SV, 298.16= 1.010, and S2098.6=49.14-0.10 for DCN (g).
The National Bureau of Standards tables (370) list S98.16= 30.8
for HCN (aq).
Cyanic Acid.-The value, S2098.1-=43.6, for HCNO (aq.) is given in
the National Bureau of Standards tables (370).
Sulfide.-Heat-capacity measurements of H2S at low temperatures
were made by Clusius and Frank (95, 97,162) (110-2090) and Giauque
and Blue (175) (160-2130). The calculations of the latter investi-
gators are repeated here. They find S16.o=0.26 (extrapolation),
8003.52-I .0=7.65 (crystals III), ASo03.52= 368.0/103.52=3.55 (tran-
sition), S126.0- S.52= 2.48 (crystals II), S127.0 o S26.0= 121.3/126.22=
0.96 (transition), Ss87 .61- S12.o= 5.32 (crystals I), ASI7.61= 568.1/187.61
=3.03 (fusion), S212.7~- S87.1=2.05 (liquid), AS212 .77=4,463/212.77
Here’s what’s next.
This report can be searched. Note: Results may vary based on the legibility of text within the document.
Tools / Downloads
Get a copy of this page or view the extracted text.
Citing and Sharing
Basic information for referencing this web page. We also provide extended guidance on usage rights, references, copying or embedding.
Reference the current page of this Report.
Kelley, K. K. Contributions to the Data on Theoretical Metallurgy: [Part] 11. Entropies of Inorganic Substances: Revision (1948) of Data and Methods of Calculation, report, 1950; Washington D.C.. (https://digital.library.unt.edu/ark:/67531/metadc12637/m1/56/?rotate=90: accessed May 24, 2019), University of North Texas Libraries, Digital Library, https://digital.library.unt.edu; crediting UNT Libraries Government Documents Department.