Surface Machinery and Methods for Oil-Well Pumping Page: 70
The following text was automatically extracted from the image on this page using optical character recognition software:
70 SURFACE MACHINERY AND METHODS FOR OIL-WELL PUMPING.
BEVEL GEAR AND DISK TYPE
Small powers of the bevel gear and disk type consist of pulley,
shaft, beveled gear and pinion, wrist pin, and disk mounted on a cast-
iron bed plate, with the large gear placed to revolve in a horizontal
plane. Usually, three wrist-pin adjustments on the upper face of
FIGURE 10.-Small spur gear and crank-arm type of power.
the gear permit three different positions of the disk with reference
to the gear axis, and thus allow three different lengths of stroke.
These powers are light, strong, and compact and are well suited for
pumping two to six shallow wells. The disk on the wrist pin wears
rapidly, however, unless enough bearing surface is insured by using
Here’s what’s next.
This report can be searched. Note: Results may vary based on the legibility of text within the document.
Citing and Sharing
Basic information for referencing this web page. We also provide extended guidance on usage rights, references, copying or embedding.
Reference the current page of this Report.
George, H. C. Surface Machinery and Methods for Oil-Well Pumping, report, 1925; Washington D.C.. (digital.library.unt.edu/ark:/67531/metadc12407/m1/90/: accessed February 23, 2017), University of North Texas Libraries, Digital Library, digital.library.unt.edu; crediting UNT Libraries Government Documents Department.