Lower thrust structure S/N 0000001 static structural test evaluation report Page: 6 of 53
This report is part of the collection entitled: Office of Scientific & Technical Information Technical Reports and was provided to Digital Library by the UNT Libraries Government Documents Department.
The following text was automatically extracted from the image on this page using optical character recognition software:
I. INTRODUCTION 1
II. TEST PROGRAM OBJECTIVES 3
III. DESCRIPTION OF TEST 5
A. TEST ASSEMBLY 5
B. INSTRUMENTATION 9
C. TEST OPERATIONS 15
TV EXPERIMENTAL RESULTS 17
A. LOADS 17
B. STRAIN DISTRIBUTION 19
C. DEFLECTION 35
D. STRESSCOAT 39
V. EVALUATION AND CONCLUSIONS 41
A. DISCUSSION 41
1. Structural Integrity 41
2. Axial and Lateral Stiffness 42
3. Thrust Alignment 44
4. Design Improvement 44
5. Theoretical Analysis 44
Po CONCLUSIONS 45
i Measured UTS Biaxial Stresses at Maximutm load 20
2 Measured Uniaxial Stresses Adjacent Reinforced Cutouts 21
3 TVC Actuator Support Axial Loads and Stresses 30
4 Comparison of TVC Actuator Support Axial and Bending 33
5 Summary of Clamp Stresses 3h
6 rustrum and TVC Actuator Support Deflections at Maximum 36
7 Axial Spring Constant 43
Here’s what’s next.
This report can be searched. Note: Results may vary based on the legibility of text within the document.
Tools / Downloads
Get a copy of this page or view the extracted text.
Citing and Sharing
Basic information for referencing this web page. We also provide extended guidance on usage rights, references, copying or embedding.
Reference the current page of this Report.
Lower thrust structure S/N 0000001 static structural test evaluation report, report, April 1, 1965; Sacramento, California. (https://digital.library.unt.edu/ark:/67531/metadc1024652/m1/6/?rotate=270: accessed April 25, 2019), University of North Texas Libraries, Digital Library, https://digital.library.unt.edu; crediting UNT Libraries Government Documents Department.