Tests were conducted to determine methods of removing scale deposits from the HRT heat exchangers. A mockup of the heat exchanger header was cleared of a deposit of iron rust by reverse flushing at a flow rate below 75 gpm. A tube bundle consisting of 109 1/4 in OD X 0.049 in. wall tubes was plugged with rust. Approximately 80% of these tubes were unplugged by using a 70 psi water pressure differential in combination with vibration from a pneumatic rivet gun. No mechanical method was employed in the tests which could clear the remaining tubes. (auth)
Serving as both a federal and a state depository library, the UNT Libraries Government Documents Department maintains millions of items in a variety of formats. The department is a member of the FDLP Content Partnerships Program and an Affiliated Archive of the National Archives.
Descriptive information to help identify this report.
Follow the links below to find similar items on the Digital Library.
Description
Tests were conducted to determine methods of removing scale deposits from the HRT heat exchangers. A mockup of the heat exchanger header was cleared of a deposit of iron rust by reverse flushing at a flow rate below 75 gpm. A tube bundle consisting of 109 1/4 in OD X 0.049 in. wall tubes was plugged with rust. Approximately 80% of these tubes were unplugged by using a 70 psi water pressure differential in combination with vibration from a pneumatic rivet gun. No mechanical method was employed in the tests which could clear the remaining tubes. (auth)
This report is part of the following collection of related materials.
Office of Scientific & Technical Information Technical Reports
Reports, articles and other documents harvested from the Office of Scientific and Technical Information.
Office of Scientific and Technical Information (OSTI) is the Department of Energy (DOE) office that collects, preserves, and disseminates DOE-sponsored research and development (R&D) results that are the outcomes of R&D projects or other funded activities at DOE labs and facilities nationwide and grantees at universities and other institutions.
Gabbard, C.H.; Eissenberg, D.M.; Moyers, J.C. & Namba, I.K.INVESTIGATION OF MECHANICAL METHODS OF SCALE REMOVAL FROM HRT HEAT EXCHANGERS,
report,
July 21, 1959;
Oak Ridge, Tennessee.
(https://digital.library.unt.edu/ark:/67531/metadc1024039/:
accessed October 8, 2024),
University of North Texas Libraries, UNT Digital Library, https://digital.library.unt.edu;
crediting UNT Libraries Government Documents Department.
