44 Matching Results

Search Results

Results: 1 - 24 next
open access

Study of performance of high speed turning using the volumetric dimension coefficient of resultant cutting force

Description: This article describes the experimental study of the resultant cutting force evolution of two coating carbide and a cermet inserts, during the dry turning of AISI 1045 steel with 400, 500, and 600 m/min cutting speeds.
Date: July 2013
Creator: Hernández-González, L. W.; Pérez-Rodríguez, R.; Zambrano-Robledo, P. C.; Siller Carrillo, Héctor Rafael & Toscano-Reyes, H.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Experimental Determination of Residual Stresses Generated by Single Point Incremental Forming of AlSi10Mg Sheets Produced Using SLM Additive Manufacturing Process

Description: This article focuses on investigating the residual stress values associated with a part fabricated by Selective Laser Melting technology (SLM) when this is subjected further to forces on single point incremental forming (SPIF) operation of variable wall angle.
Date: December 13, 2018
Creator: López, Cecilio; Elías-Zúñiga, Alex; Jiménez, Isaac; Martínez-Romero, Oscar; Siller Carrillo, Héctor Rafael & Diabb, José
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Permeability Study of Austenitic Stainless Steel Surfaces Produced by Selective Laser Melting

Description: In this article, permeability properties and surface roughness of stainless steel (SS316L) surfaces were evaluated through experimentation with three different laser scanning patterns (chessboard, meander, and stripe), and different sloping angles between the fabricated surface and the laser beam incident on the process. Results showed that for each scanning pattern, the roughness decreased as the sloping angle increased consistently in all experimental trials.
Date: November 24, 2017
Creator: Segura-Cardenas, Emmanuel; Ramírez-Cedillo, Erick; Sandoval-Robles, Jesús Alejandro; Ruiz-Huerta, Leopoldo; Caballero-Ruiz, Alberto & Siller Carrillo, Héctor Rafael
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Study of PVD AlCrN Coating for Reducing Carbide Cutting Tool Deterioration in the Machining of Titanium Alloys

Description: This article studies a thin nanocomposite film made out of AlCrN (aluminum-chromium-nitrite) to show experimental work in the deposition process and its characterization.
Date: May 24, 2013
Creator: Cadena, Natalia L.; Cue-Sampedro, Rodrigo; Siller Carrillo, Héctor Rafael; Arizmendi-Morquecho, Ana M.; Rivera-Solorio, Carlos I. & Di-Nardo, Santiago
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Polymeric Materials Reinforced with Multiwall Carbon Nanotubes: A Constitutive Material Model

Description: This article discusses the modification of an existing material model to take into account softening and residual strain effects observed in polymeric materials reinforced with carbon nanotubes when subjected to loading and unloading cycles.
Date: July 16, 2013
Creator: Córdova, René K.; Elías-Zúñiga, Alex; Elizalde, Luis E.; Siller Carrillo, Héctor Rafael; Sánchez, José Antonio; Rodríguez, Ciro A. et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Evaluation of Superficial and Dimensional Quality Features in Metallic Micro-Channels Manufactured by Micro-End-Milling

Description: This article focuses on a set of experiments in the micro-milling of channels made of aluminum, titanium alloys and stainless steel.
Date: April 3, 2013
Creator: Monroy-Vázquez, Karla P.; Attanasio, Aldo; Ceretti, Elisabetta; Siller Carrillo, Héctor Rafael; Hendrichs-Troeglen, Nicolás J. & Giardini, Claudio
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Rapid Fabrication of Disposable Micromixing Arrays Using Xurography and Laser Ablation

Description: This article presents a novel split-and-recombine (SAR) array design adapted for interfacing standardized dispensing (handheld micropipette) and sampling (microplate reader) equipment.
Date: May 4, 2017
Creator: Martínez-López, J. Israel; Betancourt, H. A.; García-López, Erika; Rodríguez, Ciro A. & Siller Carrillo, Héctor Rafael
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Experimental Study of Back Wall Dross and Surface Roughness in Fiber Laser Microcutting of 316L Miniature Tubes

Description: This article uses extensive experimentation to evaluate the effect of fiber laser micro-cutting parameters over average surface roughness and back wall dross in AISI 316L stainless steel mixture tubes.
Date: December 26, 2017
Creator: García-López, Erika; Medrano-Tellez, Alexis G.; Ibarra-Medina, Juansethi R.; Siller Carrillo, Héctor Rafael & Rodríguez, Ciro A.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Hydrostatic High-Pressure Post-Processing of Specimens Fabricated by DLP, SLA, and FDM: An Alternative for the Sterilization of Polymer-Based Biomedical Devices

Description: This article assesses the effects of sterilization in materials manufactured using additive manufacturing by employing a sterilization technique used in the food industry.
Date: December 13, 2018
Creator: Robles Linares-Alvelais, José; Figueroa-Cavazos, J. Obedt; Chuck-Hernandez, C.; Siller Carrillo, Héctor Rafael; Rodríguez, Ciro A. & Martínez-López, J. Israel
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Analyzing the Effectiveness of Microlubrication Using a Vegetable Oil-Based Metal Working Fluid during End Milling AISI 1018 Steel

Description: This article describes a study in which a vegetable oil-based lubricant was used to conduct wear analysis and to analyze the effectiveness of microlubrication during end milling AISI 1018 steel.
Date: April 15, 2014
Creator: Shaikh, Vasim; Boubekri, Nourredine & Scharf, Thomas W.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Xurography as a Rapid Fabrication Alternative for Point-of-Care Devices: Assessment of Passive Micromixers

Description: This article evaluates the viability of xurography as a rapid fabrication tool for the development of ultra-low cost microfluidic technology for extreme Point-of-Care (POC) micromixing devices.
Date: May 16, 2016
Creator: Martínez-López, J. Israel; Mojica, Mauricio; Rodríguez, Ciro A. & Siller Carrillo, Héctor Rafael
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Seismic Response and Engineering of Cold-formed Steel Framed Buildings

Description: This article discusses a North American effort which formed as part of the NSF Network for Earthquake Engineering Simulation (NEES), known as Enabling Performance-Based Seismic Design of Multi-Story Cold-Formed Steel Structures (CFS-NEES), as it addresses seismic performance-based design for cold-formed steel framed buildings.
Date: May 26, 2016
Creator: Schafer, B. W.; Ayhan, D.; Leng, J.; Liu, P.; Padilla-Llano, D.; Peterman, K. D. et al.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Stress-Softening and Residual Strain Effects in Suture Materials

Description: This article focuses on the formulation of a constitutive equation to predict Mullins and residual strain effects of buna-N, silicone, and neoprene rubber strings subjected to small transverse vibrations.
Date: September 4, 2013
Creator: Elías-Zúñiga, Alex; Baylón, Karen; Martínez-Romero, Oscar; Rodríguez, Ciro A. & Siller Carrillo, Héctor Rafael
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Evaluation Results of an E and ET Education Forum

Description: This article discusses evaluation results of an Engineering (E) and Engineering Technology (ET) education forum at the University of Houston. A central focus to these discussions revolved around whether Engineering and Engineering Technology exist as separate fields or whether there was value in thinking about them as part of a continuum.
Date: 2011
Creator: Ramos, Miguel; Chapman, Lauren; Cannady, Mac & Barbieri, Enrique
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
open access

Influence of PEEK Coating on Hip Implant Stress Shielding: A Finite Element Analysis

Description: This article proposes a design concept for hip implants, using a combination of metallic stem with a polymer coating.
Date: February 7, 2016
Creator: Anguiano-Sanchez, Jesica; Martínez-Romero, Oscar; Siller Carrillo, Héctor Rafael; Díaz-Elizondo, José A.; Flores-Villalba, Eduardo & Rodríguez, Ciro A.
Item Type: Refine your search to only Article
Partner: UNT College of Engineering
Back to Top of Screen