The reaction of the chelating ligand 4-[4,6-bis(3,5-dimethyl-1H-pyrazol-1-yl)-1,3,5-triazin-2-yl]-N,N-diethyl-benzenamine, L, with pentacarbonylchlororhenium by conventional heating method produces the complexes fac-[ReL(CO)3Cl2] and fac-[Re2L(CO)6Cl2] in a period of 48 hours. The use of microwaves as the source of heat and the increase in the equivalents of one of the reactants leads to a more selective reaction and also decreases the reaction time to 1 hour. After proper purification, the photophysical properties of fac-[ReL(CO)3Cl] were analyzed. The solid-state photoluminescence analysis showed an emission band at 628 nm independent of temperature. However, in the solution studies, the emission band shifted from 550 nm in frozen media to 610 nm when the matrix became fluid. These results confirm that this complex possess a phenomenon known as rigidochromism.
A series of heteroleptic and homoleptic platinum(II) complexes has been synthesized and characterized towards their use in thin film devices such as organic light-emitting diodes (OLEDs) and organic thin film transistors (OTFTs). Pyridylpyrazolate- and pyridyltetrazolate-containing ligands were selected due to their structural rigidity and ease of functionalization. Single-crystal x-ray diffraction studies of two selected heteroleptic complexes show strong aggregation with preferential stacking into vertical columns with a varying degree of overlap of the neighboring square planar molecular units. It is shown that the close proximity of the molecules to one another in the stack increases semiconducting character, phosphorescence quantum yields, and shorter radiative lifetimes. The potential for these materials towards incorporation into high-efficiency doping free white OLEDs (DFW-OLEDs) for solid-state lighting and display applications has been realized and will be expanded upon by present and future embodiments of materials in this thesis.
Organometallic catalysis has attracted significant interest from both industry and academia due to its wide applications in organic synthetic transformations. Example of such transformations include the reaction of a zinc carbenoid with olefins to form cyclopropanes. The first project is a computational study using both density functional and correlated wavefunction methods of the reaction between ethylene and model zinc carbenoid, nitrenoid and oxenoid complexes (L-Zn-E-X, E = CH2, NH or O, L = X = I or Cl). It was shown that cyclopropanation of ethylene with IZnCH2I and aziridination of ethylene with IZnNHI proceed via a single-step mechanism with an asynchronous transition state. The reaction barrier for the aziridination with IZnNHI is lower than that of cyclopropanation. Changing the leaving group of IZnNHI from I to Cl, changes the mechanism of the aziridination reaction to a two-step pathway. The calculation results from the epoxidation with IZnOI and ClZnOCl oxenoids suggest a two-step mechanism for both oxenoids. Another important example of organometallic catalysis is the formation of alkyl arenes from arenes and olefins using transition metal catalysis (olefin hydroarylation). We studied with DFT methods the mechanism of a novel Rh catalyst (FlDAB)Rh(TFA)(η2–C2H4) [FlDAB = N,N’ -bis(pentafluorophenyl)-2,3-dimethyl-1,4-diaza-1,3-butadiene; TFA = trifluoroacetate] that converts benzene, ethylene and air-recyclable Cu(II) oxidants to styrene. Possible mechanisms are discussed.
The characterization of 2,3,6,7,10,11-hexabromotriphenylene, Br6TP, is presented toward its potential use as an n-type organic semiconductor and metal-free room temperature phosphor. The crystal structure shows both anisotropic two-dimensional BrBr interactions and inter-layer ?-stacking interactions. Photophysical characteristics were evaluated using solid-state photoluminescence and diffuse reflectance spectroscopies, revealing significantly red-shifted excitations in the visible region for the yellow solid material (compared to ultraviolet absorption bands for the colorless dilute solutions). Correlation of spectral, electrochemical, and computational data suggest the presence of an n-type semiconducting behavior due to the electron-poor aromatic ring. The material shows excellent thermal stability as demonstrated by thermogravimetric analysis and infrared spectra of a thin film deposited by thermal evaporation. The potential for Br6TP and its analogues toward use in several types of photonic and electronic devices is discussed.
This is my thesis research on the preparation of borylazadipyrromethene (azaBODIPY) dyes bearing an anchoring group, such as a carboxylic acid group, at the β-pyrrolic position of the azadipyrromethene scaffold. Carboxylate groups form covalent bonds to oxide semiconductors such as TiO2 (n-type) or Cu2O (p-type) in dye-sensitized solar cells (DSCs) or photogalvanic dye-sensitized solar cells (P-DSCs). Oxide-binding azaBODIPY dyes can be used to investigate the rate and mechanism of electron injection from the dyes to the semiconductors. Two different types of azaBODIPY (difluoroboryl and dialkynylboryl) were prepared by following previously developed methods. To convert difluoroborylazaBODIPY to the final dyes having a carboxylic acid in the β-pyrrolic position, several distinct synthetic routes were designed, adopting various reactions, such as halogenation, Sonogashira coupling, Knoevenagel condensation, Grignard reagents, Vilsmeir-Haack, and Steglich esterification. Some of these reactions were successful, but the overall synthesis to the targeted final molecule couldn’t be accomplished. Even though further studies on the synthesis of oxide-binding azaBODIPYs are needed, at least my thesis research suggests what reactions can be implemented to complete this synthesis in the future. Proton NMR (nuclear magnetic resonance) and carbon NMR were commonly used to confirm the synthesized compounds, and sometimes crystallographic information was obtained by XRD (X-ray diffraction) whenever crystals of sufficient size and quality were grown. NMR spectra, interpreted by SpinWorks 3 software, and crystal structures will be introduced in each chapter.
Plasmonic photothermal therapy (PPTT) has a rising promise for treating different cancer cells such as lymphoma or stomach cancer. Technique development of PPTT using metallic nanoparticles is developed upon a modification of the irradiation therapy using two major changes: using a less harmful visible amber light (excluding blue light) and using gold-loaded biocompatible nanoparticles. Acrylate nanoparticles were loaded with desired types of gold nanoparticles at different sizes. The gold-loaded gold nanoparticles were conjugated to cancer cells. By selectively delivering the gold nanoparticles into cancer cells, irradiating a harmless amber visible light will achieve thermal ablation of the cancer cells. Based on imaging spectroscopy, flow cytometry, and cell viability assays, results showed reduction of gold-loaded viable cancer cells upon irradiating with amber visible light, no change in the number of cancer cells with irradiating with light only. On the other hand, DNA intercalation of a trinuclear gold(I), [Au(3-CH3,5-COOH)Pz]3 (Au3) is contrasted with the standard organic intercalators ethidium and ellipticine, as investigated computationally. Frontier molecular orbital energies of intercalators and DNA base pairs were determined and found that all intercalators are good electron acceptors with Au3 being the best electron acceptor having the lowest LUMO. DNA base pairs are better electron donors having the lowest HOMO values, and from the intercalators and base pairs' HOMO/LUMO energies, it is evident the intercalators will overlap with the HOMO of DNA stabilizing the intercalators. Interaction energies (kcal/mol) were obtained as a function of distance, r (angstroms). Results show that the theoretical treatment SDD-WB97XD outperforms SDD-LSDA in both adenine-thymine (AT) systems with ethidium and Au3 intercalators. In both guanine-cytosine (GC) and AT pairs, the Au3 has the lowest interaction energies among these common intercalators, suggesting a potential intercalating drug. Experimental DNA intercalation studies were attempted and methods of finding intercalation binding constants were established, showing gold …
The recovery processes of critical metals from multiple sources have turned more and more attention due to the increasing demand and consumption of them in modern industry. Many metals are used as significant components in manufacturing of a variety of products and equipment, playing significant roles in the economic security and national security; those metals involve rare earth elements (REEs), precious metals which include gold, silver, and platinum group metals (PGMs), and other valuable metals such as lithium, uranium, nickel, et al. The traditional approach to obtaining the above metals is by hardrock mining of natural ores via chemical and physical processes. However, this method of mining and refining metals from minerals is usually energy-consuming, costly, and environmental-destructive. Thus, various approaches to extracting or recycling target metals from the seawater or the solution of secondary resources as an alternative to traditional hardrock mining have been developed, and thereinto, using functional porous adsorbents to selectively capture specific metal ions from the aqueous resources has attracted increasing attention due to its outstanding merits such as high efficiency, energy-saving process, low cost, and reduced environmental impacts
Our country continues to demand clean renewable energy to meet the growing energy needs of our time. Thus, natural gas, which is 87% by volume of methane, has become a hot topic of discussion because it is a clean burning fuel. However, the transportation of methane is not easy because it is a gas at standard temperature and pressure. The usage of transition metals for the conversion of small organic species like methane into a liquid has been a longstanding practice in stoichiometric chemistry. Nonetheless, the current two-step process takes place at a high temperature and pressure for the conversion of methane and steam to methanol via CO + H2 (syngas). The direct oxidation of methane (CH4) into methanol (CH3OH) via homogeneous catalysis is of interest if the system can operate at standard pressure and a temperature less than 250 C. Methane is an inert gas due to the high C-H bond dissociation energy (BDE) of 105 kcal/mol. This dissertation discusses a series of computational investigations of oxy-insertion pathways to understand the essential chemistry behind the functionalization of methane via the use of homogeneous transition metal catalysis. The methane to methanol (MTM) catalytic cycle is made up of two key steps: (1) C-H activation by a metal-methoxy complex, (2) the insertion of oxygen into the metal−methyl bond (oxy-insertion). While, the first step (C-H activation) has been well studied, the second step has been less studied. Thus, this dissertation focuses on oxy-insertion via a two-step mechanism, oxygen-atom transfer (OAT) and methyl migration, utilizing transition metal complexes known to activate small organic species (e.g., PtII and PdII complexes). This research seeks to guide experimental investigations, and probe the role that metal charge and coordination number play.
The major topics discussed are all relevant to the bright phosphorescent emissions of coinage metal complexes (Cu(I), Ag(I) and Au(I)) with an explanation of the theoretical background, computational results and ongoing work on the application in materials and optoelectronic devices. Density functional computations have been performed on the majority of the discussed complexes and determined that the most significant distortion that occurs in Au(I)-phosphine complexes is a near and beyond a T-shape within the P-Au-P angle when the complexes are photoexcited to the lowest phosphorescent excited state. The large distortion is experimentally qualified with the large Stokes' shift that occurs between the excitation and emission spectra and can be as large as 18 000 cm-1 for the neutral Au(I) complexes. The excited state distortion has been thoroughly investigated and it is determined that not only is it pertinent to the efficient luminescence but also for the tunability in the emission. The factors that affect tunability have been determined to be electronics, sterics, rigidity of solution and temperature. The luminescent shifts determined from varying these parameters have been described systematically and have revealed emission colors that span the entire visible spectrum. These astounding features that have been discovered within studies of coinage metal phosphorescent complexes are an asset to applications ranging from materials development to electronics.
The gas phase reactions of atomic chlorine with hydrogen sulfide, ammonia, benzene, and ethylene are investigated using the laser flash photolysis / resonance fluorescence experimental technique. In addition, the kinetics of the reverse processes for the latter two elementary reactions are also studied experimentally. The absolute rate constants for these processes are measured over a wide range of conditions, and the results offer new accurate information about the reactivity and thermochemistry of these systems. The temperature dependences of these reactions are interpreted via the Arrhenius equation, which yields significantly negative activation energies for the reaction of the chlorine atom and hydrogen sulfide as well as for that between the phenyl radical and hydrogen chloride. Positive activation energies which are smaller than the overall endothermicity are measured for the reactions between atomic chlorine with ammonia and ethylene, which suggests that the reverse processes for these reactions also possess negative activation energies. The enthalpies of formation of the phenyl and β-chlorovinyl are assessed via the third-law method. The stability and reactivity of each reaction system is further rationalized based on potential energy surfaces, computed with high-level ab initio quantum mechanical methods and refined through the inclusion of effects which arise from the special theory of relativity. Large amounts of spin-contamination are found to result in inaccurate computed thermochemistry for the phenyl and ethyl radicals. A reformulation of the computational approach to incorporate spin-restricted reference wavefunctions yields computed thermochemistry in good accord with experiment. The computed potential energy surfaces rationalize the observed negative temperature dependences in terms of a chemical activation mechanism, and the possibility that an energized adduct may contribute to product formation is investigated via RRKM theory.
Cobalt oxynitride films formed by magnetron sputter deposition of a Co target in N2 or NH3 plasma or, alternatively, by NH3 plasma nitridation of a Co film deposited on Si(100), show a divergence of properties arising from (a) N and O interactions for N and O atoms bonded to each other or through a common metal center and (b) the oxophilicity of the metal center itself. Core and valence band X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and plane wave density functional theory (DFT) calculations have been used to probe chemical and electronic interactions of nitrogen-rich cobalt oxynitride CoO1-xNx (x > 0.7) films. DFT-based calculations supervised by the Cundari group show the zinc blende (ZB) structure is found to be energetically favored over the rocksalt (RS) structure for x > ~ 0.2, with an energy minimum observed in the ZB structure for x ~ 0.8 - 0.9. There is also agreement with experiment for core level binding energies obtained for DFT calculations based on the ZB structure and this forms the basis of a predictive model for understanding how N and O interactions impact the electronic and catalytic properties of these materials. Vanadium oxynitride films were deposited in a mixture of O2/Ar/N2 environments on α-Al2O3(0001) or SiO2/Si(100) substrates to obtain films with varied N/O stoichiometries via magnetron sputter deposition using a vanadium target. Films deposited on the Al2O3(0001) substrates generally, though not always, exhibited a (111) orientation, which is consistent with a rock salt structure. The enhancement of the surface properties of vanadium oxynitride was explored to improve its catalytic properties.
This dissertation covers the studies of two major topics: the photochemistry of mononuclear and multinuclear gold(I) complexes and synthetic approaches to tailor photophysical properties of cyclic trinuclear d10 complexes. First a detailed photochemical examination into the photoreactivity of neutral mononuclear and multinuclear gold(I) complexes is discussed, with the aim of gold nanoparticle size and shape control for biomedical and catalysis applications. Next is a comprehensive systematic synthetic approach to tailor the photophysical properties of cyclic trinuclear d10 complexes. This synthetic approach includes an investigation of structure-luminescence relationships between cyclic trinuclear complexes, an examination into their π-acid/π-base reactivity with heavy metal cations and an exploration into the photophysical properties of new heterobimetallic cyclic trinuclear complexes. These photophysical properties inspections are used to screen materials for their employment in molecular electronic devices such as organic light-emitting diodes (OLEDs) and thin film transistors (OTFTs).
There is a high demand for the development of processes for the conversion of ubiquitous molecules into industrially useful commodities. Transition metal catalysts are often utilized for the activation and functionalization of small organic molecules due to their diverse nature and proven utility with a myriad of chemical transformations. The functionalization of methane (CH4) and dinitrogen (N2) to methanol (CH3OH) and ammonia (NH3) respectively is of particular interest; however, both methane and dinitrogen are essentially inert due to the inherit strength of their bonds. In this dissertation a series of computational studies is performed to better understand the fundamental chemistry behind the functionalization of methane and the activation of dinitrogen in a homogeneous environment. A catalytic cycle is proposed for the oxy-functionalization of methane to methanol. The cycle consists of two key steps: (1) C-H activation across a metal-alkoxide bond (M-OR), and (2) regeneration of the M-OR species through an oxy-insertion step utilizing external oxidants. The C-H activation step has been extensively studied; however, the latter step is not as well understood with limited examples. For this work, we focus on the oxy-insertion step starting with a class of compounds known to do C-H activation (i.e., Pt(II) systems). Computational studies have been carried out in an attempt to guide experimental collaborators to promising new systems. Thus, the majority of this dissertation is an attempt to extend transition metal mediated C-O bond forming reactions to complexes known to perform C-H activation chemistry. The last chapter involves a computational study of the homogeneous cleavage of N2 utilizing iron-?-diketiminate fragments. This reaction has been studied experimentally, however, the reactive intermediates were not isolated and the mechanism of this reaction was unknown. Density functional theory (DFT) calculations are carried out to elucidate the mechanism of the reductive cleavage of N2 via the sequential addition …
The major topics discussed are the phosphorescence sensitization in the lanthanides via energy transfer and in the organics by heavy atom effects. The f-f transitions in lanthanides are parity forbidden and have weak molar extinction coefficients. Upon complexation with the ligand, ttrpy (4'-p-Tolyl-[2,2':6',2"]-terpyridine) the absorption takes place through the ligand and the excitation is transferred to the lanthanides, which in turn emit. This process is known as "sensitized luminescence." Bright red emission from europium and bright green emission from terbium complexes were observed. There is ongoing work on the making of OLEDs with neutral complexes of lanthanide hexafluoroacetyl acetonate/ttrpy, studied in this dissertation. Attempts to observe analogous energy transfer from the inorganic donor complexes of Au(I) thiocyanates were unsuccessful due to poor overlap of the emissions of these systems with the absorptions of Eu(III) and Tb(III). Photophysics of silver-aromatic complexes deals with the enhancement of phosphorescence in the aromatics. The heavy atom effect of the silver is responsible for this enhancement in phosphorescence. Aromatics such as naphthalene, perylene, anthracene and pyrene were involved in this study. Stern Volmer plots were studied by performing the quenching studies. The quenchers employed were both heavy metals such as silver and thallium and lighter metal like potassium. Dynamic quenching as the predominant phenomenon was noticed.
Phosphorescent transition metal complexes make up an important group of compounds that continues to attract intense research owing to their intrinsic bioimaging applications that arise from bright emissions, relatively long excited state lifetimes, and large stokes shifts. Now for biomaging assay a model organism is required which must meet certain criteria for practical applications. The organism needs to be small, with a high turn-over of progeny (high fecundity), a short lifecycle, and low maintenance and assay costs. Our model organism C. elegans met all the criteria. The ideal phosphor has low toxicity in the model organism. In this work the strongly phosphorescent platinum (II) pyrophosphito-complex was tested for biological applications as a potential in vivo hypoxia sensor. The suitability of the phosphor was derived from its water solubility, bright phosphorescence at room temperature, and long excited state lifetime (~ 10 µs). The applications branched off to include testing of C. elegans survival when treated with the phosphor, which included lifespan and fecundity assays, toxicity assays including the determination of the LC50, and recovery after paraquat poisoning. Quenching experiments were performed using some well knows oxygen derivatives, and the quenching mechanisms were derived from Stern-Volmer plots. Reaction stoichiometries were derived from Job plots, while percent scavenging (or antioxidant) activities were determined graphically. The high photochemical reactivity of the complex was clearly manifested in these reactions.
The two major topics studied in this dissertation are the gold(I) pyrazolate trimer {[Au(3-R,5-R’)Pz]3} complexes in aqueous chitosan polymer and phosphorescent polymeric nanoparticles based on platinum(II) based complex. The first topic is the synthesis, characterization and optical sensing application of gold(I) pyrazolate trimer complexes within aqueous chitosan polymer. A gold(I) pyrazolate trimer complex, {[Au(3-CH3,5-COOH)Pz]3}, shows high sensitivity and selectivity for silver ions in aqueous media, is discussed for optical sensing and solution-processed organic light emitting diodes (OLEDs) applications. Gold(I) pyrazolate trimer complexes are bright red emissive in polymeric solution and their emission color changes with respect to heavy metal ions, pH and dissolved carbon dioxide. These photophysical properties are very useful for designing the optical sensors. The phosphorescent polymeric nanoparticles are prepared with Pt-POP complex and polyacrylonitrile polymer. These particles show excellent photophysical properties and stable up to >3 years at room temperature. Such nanomaterials have potential applications in biomedical and polymeric OLEDs. The phosphorescent hybrid composites are also prepared with Pt-POP and biocompatible polymers, such as chitosan, poly-l-lysine, BSA, pnipam, and pdadmac. Photoluminescent enhancement of Pt-POP with such polymers is also involved in this study. These hybrid composites are promising materials for biomedical applications such as protein labeling and bioimaging.
This dissertation has two intersecting foci; firstly, the discovery of a new methodology for the growth of high surface area cuprous oxide (Cu2O) substrates. Secondly, the synthesis and characterization of electron-accepting molecules, and their incorporation into excitonic solar cells (XSCs) using the Cu2O substrates as electrodes. Increasing the surface area of the semiconductor creates more locations for charge transfer to occur thus increasing the overall efficiency of the device. Zinc oxide (ZnO) has been widely studied, and can be easily grown into many different films with high surface area morphologies. The ZnO films serve as sacrificial templates that allow us to electrochemically grow new semiconductors with the same high surface area morphologies but composed of a material having more desirable electronic properties. A polymer can be applied over the surface of the ZnO nanorod films before etching the ZnO with a weak acid, thereby leaving a polymer nanopore membrane. Cathodic electrodeposition of Cu2O into the membrane nanopores gives Cu2O nanorods. Electron-accepting dyes are designed with tethers that allow for direct attachment to metal oxide semiconductors. After soaking, the semiconductor is coated with a monolayer of a dye and then the coated semiconductor films were made into various dye-sensitized solar cells (DSCs). These cells were studied to determine the electron transport properties at the semiconductor/sensitizer/electrolyte interface.
As countries pledge their commitment to a net-zero future, much of the previously forgotten climate change research were revitalized by efforts from both governmental and private sectors. In particular, the utilization of lignocellulosic materials saw a special spotlight in research interest for its abundance and its carbon removal capability during photosynthesis. The initial effort in mimicking enzymatic active sites of β-glucosidase will be explored. The crystalline covalent organic frameworks (COFs) allowed for the introduction of a variety of noncovalent interactions, which enhanced the adsorption and the catalytic activity against cellobiose and its glycosidic bonds. The physical processes associated with this reaction, such as the kinetics, equilibrium, and activation energies, will be closely examined and compared with existing standard materials and comparable advanced catalysts. In addition, several variants of COFs were synthesized to explore the effect of various noncovalent interactions with cellobiose. A radical-bearing COF was synthesized and characterized. The stability of this radical was examined by electron paramagnetic resonance spectroscopy (EPR) and its oxidative capability tested with model lignin and alcoholic compounds. The reaction products are monitored and identified using gas chromatography-mass spectroscopy (GC-MS). An oxidative coupling of phenol was explored, and its initial results are presented in chapter 5.
Density Functional Theory (DFT) is an effective tool for studying diverse metal systems. Presented herein are studies of a variety of metal systems, which can be applied to accomplish transformations that are currently difficult/impossible to achieve. The specific topics studied utilizing DFT include: 1) C–H bond activation via an Earth-abundant transition metal complex, 2) C–H bond deprotonation via an alkali metal superbase, 3) and amination/aziridination reactions utilizing a CuI reagent. Using DFT, the transformation to methanol (CH3OH) from methane (CH4) was examined. The transition metal systems studied for this transformation included a model FeII complex. This first-row transition metal is an economical, Earth-abundant metal. The ligand set for this transformation includes a carbonyl ligand in one set of complexes as well as a phosphite ligand in another. The 3d Fe metal shows the ability to convert alkyls/aryls to their oxidized counterpart in an energetically favorable manner. Also, “superbasic” alkali metal amides were investigated to perform C—H bond cleavage. Toluene was the substrate of interest with Cs chosen to be the metal of interest because of the highly electropositive nature of this alkali metal. These highly electrophilic Cs metal systems allow for very favorable C—H bond scission with a toluene substrate. Finally, the amination and aziridination of C–H and C=C bonds, respectively, by a CuI reagent was studied. The mechanism was investigated using DFT calculations. Presently, these mechanisms involving the use of coinage metals are debated. Our DFT simulations shed some insight into how these transformations occur and ultimately how they can be manipulated.
A novel route for the synthesis of the polycyclic aromatic hydrocarbon peropyrene (Pp) is reported along with the efforts to synthesize derivatives of Pp, 2,2′- and 5,5′-linked tetracene dimers as candidates for study as singlet fission materials in photovoltaic devices. Peropyrene was synthesized by the McMurry coupling conditions from phenalenone and low-valent titanium species. The crystal structure of Pp is formed by π-stacked molecular pairs in a herringbone arrangement. The direct functionalization of Pp was studied, and several indirect methods for the functionalization of Pp via phenalenone derivatives are reported. Nucleophilicly dependent, regioselective Michael addition pathways for phenalenone are described. Phenalenone forms a nucleophilic complex with bispinacolatodiboron and yields chiral 3,3′-linked phenalenone dimers and a bicyclo[3.2.1]octane derivative product of an unusual 3,4 addition. An active complex product of phenalenone and (dimethylphenylsilyl)boronic acid pinacolic ester forms Pp directly. The synthesis of 2,2′- and 5,5′-linked tetracene dimers led to the study of the reduction of 1-arylprop-2-yn-1-ol derivatives via TFA-catalyzed hydride transfer from triethylsilane. Substrates with terminal and TMS-protected alkynes showed silane exchange upon reduction. A TMS-protected, terminal alkyne became triethylsilyl-protected by about 50% whereas only triethylsilyl-protected, terminal alkyne was observed from the reduction of an unprotected, terminal alkyne. A new conformational polymorph of 1,4-bis(triisopropylsilyl)buta-1,3-diyne is reported. Five other rotamers are studied by density functional theory as possible candidates of conformational polymorphism by the analysis of torsional strain energies. The relative stabilities and interconversion equilibria of the seven conformational isomers are studied.
Copper(I) complexes have been studied through both experimental and computational means in the presented work. Overall, the work focuses on photophysical and photochemical properties of copper(I) complexes. Photophysical and photochemical properties are found to be dependent on the geometries of the copper(I) complexes. One of the geometric properties that are important for both photochemical and photophysical properties is coordination number. Coordination numbers have been observed to be dependent on both ligand size and recrystallization conditions. The complexes geometric structure, as well as the electronic effects of the coordination ligands, is shown both computationally as well as experimentally to affect the emission energies. Two-coordinate complexes are seen to have only weak emission at liquid nitrogen temperature (77 K), while at room temperature (298 K) the two-coordinate complexes are not observed to be luminescent. Three-coordinate complexes are observed to be luminescent at liquid nitrogen temperature as well as at room temperature. The three-coordinate complexes have a Y-shaped ground (S0) state that distorts towards a T-shape upon photoexcitation to the lowest lying phosphorescent state (T1). The geometric distortion is tunable by size of the coordinating ligand. Luminescence is controllable by limiting the amount of non-radiative emission. One manner by which non-radiative emission is controlled is the amount of geometric distortion that occurs as the complex undergoes photoexcitation. Bulky ligands allow for less distortion than smaller ligands, leading to higher emission energies (blue shifted energies) with higher quantum efficiency. Tuning emission and increasing quantum efficiencies can be used to create highly efficient, white emitting materials for use in white OLEDS.
Alkyl-arenes are important industry feedstock chemicals that are used as solvents, pharmaceutical precursors, and polymer monomer units. One alkyl-arene, ethylbenzene, is the main focus of this dissertation, and is produced in the million ton a year scale. As alkyl-arenes are important commodity chemicals, catalytic olefin hydroarylation is a lucrative alternative for their production rather than Friedel-Crafts alkylation or various coupling reactions that have lower atom economy, require strong acids, or are energetically demanding. Currently catalytic olefin hydroarylation still suffers from decomposition pathways of the active catalytic complexes, side reactions that lead to waste products, and unfavorable activation barriers, which represent high temperature and pressure. Modifications to the catalytically active system bipyridine platinum(II) (bpyPtII), through computational methods, are explored herein. The work presented here investigates catalytic olefin hydroarylation in order to mitigate the aforementioned difficulties. Included in this study are changes to the electronic profile of the supporting ligand, bpy, through the addition of electron withdrawing or electron donating R groups (methoxy, nitro), definite ligand replacements such as bpy to hydridotris(pyrazolyl)borate (Tp), changes in metal oxidation (II to IV), and replacing the metal center from Pt to Ni. Nickel was selected as a possible alternative to platinum as it is more Earth abundant reducing the monetary requirement for the catalyst. In addition to having a different catalytic energetic profile from platinum. Ni as expected could only facilitate single step hydrogen atom transfers due to its inability to access higher oxidations states.
This dissertation is a study of two major topics that involve synthetic strategies for new classes of phosphorescent gold(I)-based metallodendrimers. The phosphorescence of organic and inorganic luminophores originates from spin-orbit coupling owing to internal or external heavy atom effects as well as metal-centered emissions. Previous work in the Omary group entailed systematically designed small molecules, metallopolymers, and unconjugated metallodendrimers that contain d10 and d8 metals, whereas this dissertation aims in part to expand such strategies to the conjugated metallodendrimer regime. In one approach novel synthetic strategies were used to make first-generation phenyl acetylene dendrimers and phosphine derivatives thereof. The phosphine dendrimers are made by tethering one of the phosphines to an unsaturated dendrimer, as such phosphine dendrimers are better chromophores and luminophores due to their structural rigidity and extended conjugation. In another approach, 2- and 3-coordinate Au(I) dendritic complexes are synthesized from these phosphine dendrimers. This study is further extended to study metallodendritic complexes with different cores, for example triphenylene-based metallodendritic complexes with six acetylene branches. The physical properties of the metallodendrimers can be modulated upon proceeding to further dendrimer generations or by using solubilizing groups on the peripheral phosphines, thus allowing better processability for thin-film fabrication as required for molecular electronic devices and higher chance for crystal growth toward accurate structural characterization. Other data produced in this project suggested that some structural alterations led to porous solids that render them suitable for realized and potential applications in energy storage and carbon capture. The interesting luminescence properties of the metallodendrimers and porous extended solids produced in this dissertation are significant toward utilizing such materials for optoelectronic applications such as energy-saving organic light-emitting diodes and optical sensors for environmental pollutants.
A series of 28 square-planar dithiol(diimine)platinum(II) chromophoric complexes have been synthesized, characterized, and evaluated for potential efficacy in sensitization of solid state photovoltaic devices to the near-infrared regions of the electromagnetic spectrum. The effect of molecular stacking in the solid state and self-association in solution are shown to influence spectral, electronic, and magnetic properties of the chromophores. Such properties are investigated in the pure form and as partners in donor-acceptor charge transfer adducts. Finally, selected chromophores have been incorporated into single layer schottky diodes as neat films and as dopants in multi-layer organic photovoltaic devices. Evaluation of the devices internal quantum efficiency and voltage-current was measured as proof of concept.
The effects of direct plasma chemistries on carbon removal from silicon nitride (SiNx) and oxynitride (SiOxNy ) surfaces and Cu have been studied by x-photoelectron spectroscopy (XPS) and ex-situ contact angle measurements. The data indicate that O2,NH3 and He capacitively coupled plasmas are effective at removing adventitious carbon from silicon nitride (SiNx) and Silicon oxynitride (SiOxNy ) surfaces. O2plasma and He plasma treatment results in the formation of silica overlayer. In contrast, the exposure to NH3 plasma results in negligible additional oxidation of the SiNx and SiOxNy surface. Ex-situ contact angle measurements show that SiNx and SiOxNy surfaces when exposed to oxygen plasma are initially more hydrophilic than surfaces exposed to NH3 plasma and He plasma, indicating that the O2 plasma-induced SiO2 overlayer is highly reactive towards ambient corresponding to increased roughness measured by AFM. At longer ambient exposures (>~10 hours), however surfaces treated by either O2, He or NH3 plasma exhibit similar steady state contact angles, correlated with rapid uptake of adventitious carbon, as determined by XPS. Surface passivation by exposure to molecular hydrogen prior to ambient exposure significantly retards the increase in the contact angle upon the exposure to ambient. The results suggest a practical route to enhancing the time available for effective bonding to surfaces in microelectronics packaging applications.
Semi-conductor industry relies heavily on silicon (Si). However, Si is not a direct-band gap semi-conductor. Consequently, Si does not possess great versatility for multi-functional applications in comparison with the direct band-gap III-V semi-conductors such as GaAs. To bridge this gap, what is ideally required is a semi-conductor material system that is based on silicon, but has significantly greater versatility. While sparsely studied, the semi-conducting silicides material systems offer great potential. Thus, I focused on the growth and structural characterization of ruthenium silicide and osmium silicide material systems. I also characterized iron silicon germanide films using extended x-ray absorption fine structure (EXAFS) to reveal phase, semi-conducting behavior, and to calculate nearest neighbor distances. The choice of these silicides material systems was due to their theoretically predicted and/or experimentally reported direct band gaps. However, the challenge was the existence of more than one stable phase/stoichiometric ratio of these materials. In order to possess the greatest control over the growth process, molecular beam epitaxy (MBE) has been employed. Structural and film quality comparisons of as-grown versus annealed films of ruthenium silicide are presented. Structural characterization and film quality of MBE grown ruthenium silicide and osmium silicide films via in situ and ex situ techniques have been done using reflection high energy electron diffraction, scanning tunneling microscopy, atomic force microscopy, cross-sectional scanning electron microscopy, x-ray photoelectron spectroscopy, and micro Raman spectroscopy. This is the first attempt, to the best of our knowledge, to grow osmium silicide thin films on Si(100) via the template method and compare it with the regular MBE growth method. The pros and cons of using the MBE template method for osmium silicide growth are discussed, as well as the structural differences of the as-grown versus annealed films. Future perspectives include further studies on other semi-conducting silicides material systems in terms …
A combined experimental and computational study on the reversible ortho-metalation exhibited by the triosmium cluster Os3(CO)10(dppm) (dppm = 1,1-bis(diphenylphosphino)methane is reported. The conversion of nonacarbonyl cluster HOs3(CO)9[-PhP(C6H4)CH2PPh2] to Os3(CO)10(dppm) is independent of added CO and exhibits a significant inverse equilibrium isotope effect (EIE). Reductive coupling of the C-H bond in HOs3(CO)9[-PhP(C6H4)CH2PPh2] leads to the formation of agostic C-H and two distinct aryl-π species prior to the rate-limiting formation of the unsaturated cluster Os3(CO)9(dppm). Heating the unsaturated dimer H2Re2(CO)8 with Cp*Rh(CO)2 (Cp* = 1,2,3,4,5-pentamethylcyclopentadiene) at elevated temperature affords the new trimetallic clusters H2RhRe2Cp*(CO)9 and HRh2ReCp*2(CO)6, and the spiked-triangular cluster HRhRe3Cp*(CO)14. H2Re2(CO)8 reacts with Cp*2Rh2(CO)2 under identical conditions to furnish H2RhRe2Cp*(CO)9 and HRh2ReCp*2(CO)6 as the principal products, in addition to the tetrahedral cluster H2Rh2Re2Cp*2(CO)8. H2RhRe2Cp*(CO)9 undergoes facile fragmentation in the presence of halogenated solvents and the thiols RSH (where R = H, C6H4Me-p) to afford the structurally characterized products Cp*Rh(-Cl)3Re(CO)3, S2Rh3Cp*(CO)4, Cp*Rh(-Cl)(-SC6H4Me-p)2Re(CO)3, and Cp*Rh(-SC6H4Me-p)3Re(CO)3. The new hydrazido-substituted compounds TaCl(NMe2)3[N(TMS)NMe2] (TMS = tetramethylsilyl) and Ta(NMe2)4[N(TMS)NMe2] have been synthesized and their structures established by X-ray crystallography. The latter product represents the first structurally characterized octahedral tantalum(V) complex containing a single hydrazido(I) ligand in an all-nitrogen coordinated environment about the metal center. The fluxional properties of the amido and hydrazido ligands in these new compounds have been established by VT 1H NMR spectroscopy (VT = variable temperature). Preliminary data using Ta(NMe2)4[N(TMS)NMe2] as an ALD (ALD = atomic layer deposition) precursor for the preparation of tantalum nitride and tantalum oxide thin films are presented.
The phenomenon luminescence rigidochromism has been reported since the 1970s in tricarbonyldiimine complexes with a general formula [R(CO)3LX] using conventional unipolar diimine ligands such as 2,2;-bipyridine or 1,10-phenanthroline as L, and halogens or simple solvents as X. As a major part of this dissertation, microwave-assisted synthesis, purification, characterization and detailed photoluminescence studies of the complex fac-[ReCl(CO)3L], 1, where L = 4-[4,6-bis(3,5-dimethyl-1H-pyrazol-1-yl]-N,N-diethylbenzenamine are reported. The employment of microwaves in the preparation of 1 decreased the reaction time from 48 to 2 hours compared to the conventional reflux method. Stoichiometry variations allows for selective preparation of either a mononuclear, 1, or binuclear, fac-[Re2Cl2(CO)6], 2, complex. The photophysical properties of 1 were analyzed finding that it possesses significant luminescence rigidochromism. The steady state photoluminescence emission spectra of 1 in solution shift from 550 nm in frozen media to 610 nm when the matrix becomes fluid. Moreover, a very sensitive emission spectral analysis of 0.1 K temperatures steps shows a smooth transition through the glass transition temperature of the solvent host. Furthermore, synthetic modifications to L have attained a family of ambipolar compounds that have tunable photophysical, thermophysical and other material properties that render them promising candidates for potential applications in organic electronics and/or sensors - either as is or for their future complexes with various transition metals and lanthanides.
A plethora of novel scientific phenomena and practical applications, such as solid-state molecular solar cells and other optoelectronic devices for energy harvesting and lighting technologies, have catalyzed us to synthesize novel compounds with tunable properties. Synthetic routes, single crystal structures, and spectral and materials properties are described. Reactions of Ag(I) and Cu(I) precursors with various types of ligands -- including the azolates, diimines, and diiphosphines -- lead to the corresponding complexes in high yield. Varying the metal ions, ligands, synthetic methods, solvents, and/or stoichiometric ratio can change the properties including the molecular geometry or packing structure, reactivity, photophysical and photochemical properties, semiconducting behavior, and/or porosity of the functional coordination polymers obtained. For solar cells purposes, the absorption energy can be extended from the ultraviolet (UV) region, through the entire visible (Vis) region, onto a significant portion of the near-infrared (NIR) portion of the solar spectrum with high absorption coefficients due to the infinite conjugation of Cu(I) with diimine ligands. Twenty-eight crystal structures were obtained by conventional crystal growth methods from organic solvents, whereas their bulk product syntheses also included "green chemistry" approaches that precluded the use of hazardous organic solvents. The resulting products are characterized by powder x-ray diffraction (PXRD), Fouriertransform infrared (FTIR), nuclear magnetic resonance (NMR), UV/Vis/NIR absorption/diffuse reflectance/photoluminescence spectroscopies, and thermogravimetric analysis (TGA). Regarding the scientific phenomena investigated, the highlighting work in this dissertation is the discovery of novel bonding/photophysical/optoelectronic properties of the following materials: a black absorber with absorption from 200- 900 nm, a very stable compound with a bright green luminescence obtained by a solventless reaction, and a novel coordination polymer showing uncommon interaction of Ag(I) with three different types of diimine ligands simultaneously.
The focus of the following research was to (1) understand the chemistry involved in nitriding an organosilicate glass substrate prior to tantalum deposition, as well as the effect nitrogen incorporation plays on subsequent tantalum deposition and (2) the reduction of a native oxide, the removal of surface contaminants, and the etching of a HgCdTe surface utilizing atomic hydrogen. These studies were investigated utilizing XPS, TEM and AFM. XPS data show that bombardment of an OSG substrate with NH3 and Ar ions results in the removal of carbon species and the incorporation of nitrogen into the surface. Tantalum deposition onto a nitrided OSG surface results in the initial formation of tantalum nitride with continued deposition resulting in the formation of tantalum. This process is a direct method for forming a thin TaN/Ta bilayer for use in micro- and nanoelectronic devices. Exposure to atomic hydrogen is shown to increase the surface roughness of both air exposed and etched samples. XPS results indicate that atomic hydrogen reduces tellurium oxide observed on air exposed samples via first-order kinetics. The removal of surface contaminants is an important step prior to continued device fabrication for optimum device performance. It is shown here that atomic hydrogen effectively removes adsorbed chlorine from the HgCdTe surface.
The purpose of this study is to find out what students in the first chemistry course at the undergraduate level (general chemistry for science majors) know about the affordances of instrumentation used in the general chemistry laboratory and how their knowledge develops over time. Overall, students see the PASCO system as a useful and accurate measuring tool for general chemistry labs. They see the probeware as easy to use, portable, and able to interact with computers. Students find that the PASCO probeware system is useful in their general chemistry labs, more advanced chemistry labs, and in other science classes, and can be used in a variety of labs done in general chemistry. Students learn the affordances of the probeware through the lab manual, the laboratory teaching assistant, by trial and error, and from each other. The use of probeware systems provides lab instructors the opportunity to focus on the concepts illustrated by experiments and the opportunity to spend time discussing the results. In order to teach effectively, the instructor must know the correct name of the components involved, how to assemble and disassemble it correctly, how to troubleshoot the software, and must be able to replace broken or missing components quickly. The use of podcasts or Web-based videos should increase student understanding of affordances of the probeware.
Polymeric nanoparticles were designed, synthesized, and loaded with metal ions to explore the therapeutic potential for transition metals other than platinum found in cisplatin. Nanoparticles were synthesized to show the potential for polymer based vectors. Metal loading and release were characterized via Inductively Coupled Plasma Mass Spectrometry (ICP MS), Energy Dispersive X-Ray Spectroscopy (EDX), X-Ray Photoelectron Spectroscopy (XPS), and Elemental Analysis. Targeting was attempted with the expectation of observed increased particle uptake by cancer cells with flow cytometry and fluorescence microscopy. Results demonstrated that a variety of metals could be loaded to the nano-sized carriers in an aqueous environment, and that the release was pH-dependent. Expected increased targeting was inconsistent. The toxicity of these particles was measured in cancer cells where significant toxicity was observed in vitro via dosing of high copper-loaded nanoparticles and slight toxicity was observed in ruthenium-loaded nanoparticles. No significant toxicity was observed in cells dosed with metal-free nanoparticles. Future research will focus on ruthenium loaded polymeric nanoparticles with different targeting ligands dosed to different cell lines for the aim of increased uptake and decreased cancer cell viability.
This study expands the role of polythiophenes as an electron donating chromophore within energy harvesting milti-modular donor-acceptor systems. The polythiophene moiety would act as an electron donating spacer group between the donor and acceptor entities, viz., phenothiazine and fulleropyrrolidine, respectively, in the newly synthesized supramolecular triads. The triads 10-{[2,2';5',2"] terthiophene-5-fulleropyrrolidine} phenothiazine and 10-{[2,2'] bithiophene-5-fulleropyrrolidine} phenothiazine were synthesized and characterized through electrochemical and spectroscopic methods to ascertain their structural integrity. the componets of the triads were selected for their established redox parameters. Phenothiazine would act as a secondary donor and would facilitate hole-transfer from the polythiophene primary electron donor, due to its ease of oxidation and yield a long-lived charge separated state. Fulleropyrrolidine would act as an acceptor for ease of reductive capabilities and its ability to hold multiple charges. Finally, occurrence of photoinduced electron transferleading to the anticipated charge separated states is established from advanced transient spectroscopic techniques on these novel supramolecular systems.
This dissertation investigates the chemical ingenuity into the development of various photoactive supramolecular donor – acceptor systems to produce clean and carbon free energy for the next generation. The process is inspired by the principles learned from nature’s approach where the solar energy is converted into the chemical energy through the natural photosynthesis process. Owing to the importance and complexity of natural photosynthesis process, we have designed ideal donor-acceptor systems to investigate their light energy harvesting properties. This process involves two major steps: the first step is the absorption of light energy by antenna or donor systems to promote them to an excited electronic state. The second step involves, the transfer of excitation energy to the reaction center, which triggers an electron transfer process within the system. Based on this principle, the research is focused into the development of artificial photosynthesis systems to investigate dynamics of photo induced energy and electron transfer events. The derivatives of Porphyrins, Phthalocyanines, BODIPY, and SubPhthalocyanines etc have been widely used as the primary building blocks for designing photoactive and electroactive ensembles in this area because of their excellent and unique photophysical and photochemical properties. Meanwhile, the fullerene, mainly its readily available version C60 is typicaly used as an electron acceptor component because of its unique redox potential, symmetrical shape and low reorganization energy appropriate for improved charge separation behavior. The primary research motivation of the study is to achieve fast charge separation and slow charge recombination of the system by stabilizing the radical ion pairs which are formed from photo excitation, for maximum utility of solar energy. Besides Fullerene C60, this dissertation has also investigated the potential application of carbon nanomaterials (Carbon nanotubes and graphene) as primary building blocks for the study of the artificial photosynthesis process.
Porphyrins offer a very synthetically flexible template which can be modified in numerous ways to synthesize molecules with very useful properties applicable in areas such as non-linear optical properties, photodynamic therapy, dye-sensitized solar cells, chemical sensors and organic electronic devices. β-Substituted π-extended porphyrins offer unique capabilities in tuning the properties of the molecule towards practical applications. Increased π-conjugation allows the HOMO-LUMO gap to decrease and hence to redshift the absorption into the near-IR region. β-Fused benzoporphyrins offer additional benefits in which the benzene ring itself can be further modified using electron donating substituents and electron donating substituents to electronically tune these porphyrins for various uses. The goal of the research pursued in this dissertation was to develop new methods for the development of β-Substituted π-extended porphyrins and to study their optical and electronic properties. To accomplish this goal, we developed new method to synthesize A2B2 type tetrabenzoporphyrins and we studied the electron transfer in such systems. We also studied the effectiveness of such systems in dye sensitized solar cells. A new method to synthesize functionalized naphthalene fused porphyrins was also developed and we were also able to use this method to synthesize a push-pull naphthalene fused porphyrin.
Corrosion is one of the most expensive failures in industries that used metal components and other construction materials. In fact, corrosion is responsible for hundreds of billions-dollar loss in the US alone each year. In general, corrosion occurs when metal surfaces are exposed to water, oxygen, acids, bases, or salts. Therefore, metal substrates must be protected by using materials that act as barriers to avoid destructive corrosion attack. Aluminum is one of the most common metals used in the industry; and it is used in many places such as refining and petroleum production equipment, pipelines, and fossil fuel power plants. Aluminum is known to have corrosion resistance due to the forming of an oxide layer that can be reformed rapidly if the surface gets damaged. However, in the long-term the oxide layer cannot protect the aluminum surface from corrosion because it is stable only in neutral mediums and it is soluble in acidic and basic environments. Barrier protection is one of the most effective methods that prevent aluminum surfaces from being exposed to corrosive environments. These barriers can be organic or inorganic coatings that can limit the electron transport or the cathodic and the anodic reactions between aluminum alloys and the surrounding environment. Fluorinated polymers that were used in this study exhibit excellent properties which make them good candidates for corrosion protection applications. These properties include high hydrophobicity which is responsible for repelling oxygen and water and reducing the wettability of the metal surface, strong adhesion to the metal surface allowed for covering and protection of substrates in aggressive environments, and thermal stability that allows for using these polymers in high temperature environments. Overall, the corrosion protection, which was evaluated using electrochemical techniques, and the mechanical properties were improved with these fluorinated polymeric coatings in comparison to the bare aluminum …
The major topics discussed are all relevant to interfacing brightly phosphorescent and non-luminescent coinage metal complexes of [Ag(I) and Au(I)] with biopolymers and thermoresponsive gels for making hybrid nanomaterials with an explanation on syntheses, characterization and their significance in biomedical fields. Experimental results and ongoing work on determining outreaching consequences of these hybrid nanomaterials for various biomedical applications like cancer therapy, bio-imaging and antibacterial abilities are described. In vitro and in vivo studies have been performed on majority of the discussed hybrid nanomaterials and determined that the cytotoxicity or antibacterial activity are comparatively superior when compared to analogues in literature. Consequential differences are noticed in photoluminescence enhancement from hybrid phosphorescent hydrogels, phosphorescent complex ability to physically crosslink, Au(I) sulfides tendency to form NIR (near-infrared) absorbing AuNPs compared to any similar work in literature. Syntheses of these hybrid nanomaterials has been thoroughly investigated and it is determined that either metallic nanoparticles syntheses or syntheses of phosphorescent hydrogels can be carried in single step without involving any hazardous reducing agents or crosslinkers or stabilizers that are commonly employed during multiple step syntheses protocols for syntheses of similar materials in literature. These astounding results that have been discovered within studies of hybrid nanomaterials are an asset to applications ranging from materials development to health science and will have striking effect on environmental and green chemistry approaches.
Synthesis of d10 complexes of monovalent coinage metals, copper(I) and gold(I), with dithiophosphinate/diphosphine ligands -- along with their targeted characterization and screening for inorganic or organic light emitting diodes (LEDs or OLEDs, respectively) -- represents the main scope of this dissertation's scientific contribution in inorganic and materials chemistry. Photophysical studies were undertaken to quantify the phosphorescence properties of the materials in the functional forms required for LEDs or OLEDs. Computational studies were done to gain insights into the assignment of the phosphorescent emission peaks observed. The gold(I) dinuclear complexes studied would be candidates of OLED/LED devices due to room temperature phosphorescence, visible absorption/excitation bands, and low single-digit lifetimes -- which would promote higher quantum yield at higher voltages in devices with concomitant lower roll-off efficiency. The copper(I) complexes were not suited to the OLED/LED applications but can be used for thermosensing materials. Crystallographic studies were carried to elucidate coefficients of thermal expansion of the crystal unit cell for additional usage in materials applications besides optoelectronic devices. This has uncovered yet another unplanned potential application for both copper(I) and gold(I) complexes herein, as both types have been found to surpass the literature's threshold for "colossal" thermal expansion coefficients. Two other investigations represent contribution to the field of chemistry education have also been accounted for in this dissertation. First, a 12-week advanced research discovery experiment for inorganic chemistry has been designed to help students develop application-based content expertise, as well as to introduce students to research experiences that are similar to those found in academia, industry, and government research laboratories. Students are expected to develop a novel research project through conducting a literature search to find suitable reaction protocols, incorporating synthetic techniques, collecting data, characterizing products and applications of those products, and presenting their results. This multi-week research discovery experiment is centered …
Organic and organometallic electronic materials continue to attract considerable attention among researchers due to their cost effectiveness, high flexibility, low temperature processing conditions and the continuous emergence of new semiconducting materials with tailored electronic properties. In addition, organic semiconductors can be used in a variety of important technological devices such as solar cells, field-effect transistors (FETs), flash memory, radio frequency identification (RFID) tags, light emitting diodes (LEDs), etc. However, organic materials have thus far not achieved the reliability and carrier mobility obtainable with inorganic silicon-based devices. Hence, there is a need for finding alternative electronic materials other than organic semiconductors to overcome the problems of inferior stability and performance. In this dissertation, I research the development of new transition metal based electronic materials which due to the presence of metal-metal, metal-?, and ?-? interactions may give rise to superior electronic and chemical properties versus their organic counterparts. Specifically, I performed computational modeling studies on platinum based charge transfer complexes and d10 cyclo-[M(?-L)]3 trimers (M = Ag, Au and L = monoanionic bidentate bridging (C/N~C/N) ligand). The research done is aimed to guide experimental chemists to make rational choices of metals, ligands, substituents in synthesizing novel organometallic electronic materials. Furthermore, the calculations presented here propose novel ways to tune the geometric, electronic, spectroscopic, and conduction properties in semiconducting materials. In addition to novel material development, electronic device performance can be improved by making a judicious choice of device components. I have studied the interfaces of a p-type metal-organic semiconductor viz cyclo-[Au(µ-Pz)]3 trimer with metal electrodes at atomic and surface levels. This work was aimed to guide the device engineers to choose the appropriate metal electrodes considering the chemical interactions at the interface. Additionally, the calculations performed on the interfaces provided valuable insight into binding energies, charge redistribution, change in the energy …
Groundbreaking progress in molecule-based optoelectronic devices for lighting, display and energy-harvesting technologies demands highly efficient and easily processable functional materials with tunable properties governed by their molecular/supramolecular structure variations. To date, functional coordination compounds whose function is governed by non-covalent weak forces (e.g., metallophilic, dπ-acid/dπ-base stacking, halogen/halogen and/or d/π interactions) remain limited. This is unlike the situation for metal-free organic semiconductors, as most metal complexes incorporated in optoelectronic devices have their function determined by the properties of the monomeric molecular unit (e.g., Ir(III)-phenylpyridine complexes in organic light-emitting diodes (OLEDs) and Ru(II)-polypyridyl complexes in dye-sensitized solar cells (DSSCs)). This dissertation represents comprehensive results of both experimental and theoretical studies, descriptions of synthetic methods and possible application allied to monovalent coinage metal-based functional materials. The main emphasis is given to the design and synthesis of functional materials with preset material properties such as light-emitting materials, light-harvesting materials and conducting materials. In terms of advances in fundamental scientific phenomena, the major highlight of the work in this dissertation is the discovery of closed-shell polar-covalent metal-metal bonds manifested by ligand-unassisted d10-d10 covalent bonds between Cu(I) and Au(I) coinage metals in the ground electronic state (~2.87 Å; ~45 kcal/mol). Moreover, this dissertation also reports pairwise intermolecular aurophilic interactions of 3.066 Å for an Au(I) complex, representing the shortest ever reported pairwise intermolecular aurophilic distances among all coinage metal(I) cyclic trimetallic complexes to date; crystals of this complex also exhibit gigantic luminescence thermochromism of 10,200 cm-1 (violet to red). From applications prospective, the work herein presents monovalent coinage metal-based functional optoelectronic materials such as heterobimetallic complexes with near-unity photoluminescence quantum yield, metallic or semiconducting integrated donor-acceptor stacks and a new class of Au(III)-based black absorbers with cooperative intermolecular iodophilic (I…I) interactions that sensitize the harvesting of all UV, all visible, and a broad spectrum of near-IR …
The presented dissertation encompasses three distinct investigations into novel complexes with diverse applications. Firstly, a Europium-based complex, K[Eu(hfa)4], exhibits remarkable potential for detecting dissolved CO2 in an ethylene glycol medium, offering a low limit of detection, rapid response times, and high signal-to-noise ratios. This complex demonstrates promise for quantifying CO2 concentrations and finds utility in sugar fermentation monitoring. Secondly, an innovative ratiometric optical sensor, Eu(tta)3([4,4'-(t-bu)2-2,2'-bpy)], showcases exceptional sensitivity and selectivity in detecting aluminum ions, making it suitable for environmental and biological applications. It exhibits reliable quantification in both methanol and aqueous samples, with remarkable accuracy validated by ICP-OES. Lastly, modifications to the Au3Pz3 complex synthesis enable the development of a silver ion sensor, paving the way for detecting silver ion leaching in real-life scenarios, such as silver nanoparticle-embedded bandages. The research extends to the synthesis of silver nanoparticles using various methods and foresees expanded in vitro and in vivo studies. These investigations collectively offer insights into the development of advanced sensing technologies with significant implications for a wide range of practical applications.
A major drawback of chemotherapy is the lack of selectively leading to damage in healthy tissue, which results in severe acute side effects to cancer patients. The use of nanoparticles as a drug delivery system has emerged as novel strategy to overcome the barriers of immunogenic response, controlled release of therapeutic, and targeting the toxicity only to cancerous cells. In this study, polymeric nanoparticles composed of transition metals and particles derived from natural biopolymers have been generated via self-assembly. For example, nanoparticles composed of cobalt crosslinked with albumin (Co-alb NPs) via Co-amine coordination chemistry of lysine residue were syntheisized in various sizes. The method to generate Co-alb NPs involves no thermal heat, organic solvent or any surfactants, which is ideal for the production of large amounts in a timely manner. The Co-alb NPs displayed exceptional stability under physiological conditions (pH 7.4) for several days with minor changes in size; however degradation could be triggered by reductant (reduced glutathione (GSH), 10 mM) with complete disappearance of particles in less than 2 hour. Numerous therapeutics that are highly effective toward cancer cells have been developed; however, many cannot be administered to patients due to poor solubility in water and pH dependent properties. We have successfully encapsulated 7-ethyl-10-hydroxycampothecin (SN-38) into Co-alb NPs with encapsulation efficiency as high as 94% and loading capacities greater than 30%. We employed an emulsion-solvent evaporation method to incorporate SN-38 into Co-alb (SN38 Co-Alb NPs). Release of the drug from SN38 Co-Alb NPs was determined for particles incubated in PBS or PBS-GSH. SN38 Co-Alb NPs were exceptionally stable under physiological condition (PBS pH 7.4), but exhibited sustained release of SN-38 over time in the presence of GSH. Uptake and toxicity of the particles were also investigated in a gastric carcinoma cell line (SNU-5) where high degrees of macropinocytic uptake …
Multiscale modeling is an effective tool for integrating different computational methods, creating a way of modeling diverse chemical and physical phenomena. Presented are studies on a variety of chemical problems at different computational scales and also the combination of different computational methods to study a single phenomenon. The methods used encompass density functional theory (DFT), molecular dynamics (MD) simulations and finite element analysis (FEA). The DFT studies were conducted both on the molecular level and using plane-wave methods. The particular topics studied using DFT are the rational catalyst design of complexes for C—H bond activation, oxidation of nickel surfaces and the calculation of interaction properties of carbon dioxide containing systems directed towards carbon dioxide sequestration studies. Second and third row (typically precious metals) transition metal complexes are known to possess certain electronic features that define their structure and reactivity, and which are usually not observed in their first-row (base metal) congeners. Can these electronic features be conferred onto first-row transition metals with the aid of non-innocent and/or very high-field ligands? Using DFT, the impact of these electronic features upon methane C—H bond activation was modeled using the dipyridylazaallyl (smif) supporting ligand for late, first-row transition metal (M) imide, oxo and carbene complexes (M = Fe, Co, Ni, Cu; E = O, NMe, CMe2). To promote a greater understanding of the process and nature of metal passivation, first-principles analysis of partially oxidized Ni(111) and Ni(311) surface and ultra-thin film NiO layers on Ni(111) was performed. A bimodal theoretical strategy that considers the oxidation process using either a fixed GGA functional for the description of all atoms in the system, or a perturbation approach, that perturbs the electronic structure of various Ni atoms in contact with oxygen by application of the GGA+U technique was applied. Binding energy of oxygen to the nickel …
Human glutathione synthetase (hGS) is a homodimeric enzymes that catalyzes the second step in the biological synthesis of glutathione, a critical cellular antioxidant. The enzyme exhibits negative cooperativity towards the γ-glutamylcysteine (γ-GC) substrate. In this type of allosteric regulation, the binding of γ-GC at one active site significantly reduces substrate affinity at a second active site over 40 Å away. The presented work explores protein-protein interactions, substrate binding, and allosteric communication through investigation of three regions of hGS: the dimer interface, the S-loop, and the E-loop. Strong electrostatic interactions across the dimer interface of hGS maintain the appropriate tertiary and quaternary enzymatic structure needed for activity. The S-loop and E-loop of hGS form walls of the active site near γ-GC, with some residues serving to bind and position the negatively cooperative substrate. These strong interactions in the active site serve as a trigger for allosteric communication, which then passes through hydrophobic interactions at the interface. A comprehensive computational and experimental approach relates hGS structure with activity and regulation. ATP-grasp enzymes, including hGS, utilize ATP in the nucleophilic attack of a carboxylic acid in a reaction thought to proceed through the formation of an acylphosphate intermediate. Small metal cations are known to chelate the terminal phosphates of actives site ATP, yet the role of these atoms remains unclear. In the presented work, a computational metal substitution study establishes the role these divalent cations in the catalysis of peptide bonds. The simple model is used to determine the impact of metal cations on the thermodynamics and kinetics, an important stepping stone in understanding the importance of metal cations in larger biological systems.
The scope of work in this dissertation has comprised several major investigations on applications and theoretical studies of ab initio quantum mechanics and density functional theory where those techniques were applied to the following: (i) investigation of the performance of density functionals for the computations of molecular properties of 3d transition metal containing systems; (ii) guidance for experimental groups for rational design of macrometallocyclic multinuclear complexes with superior π-acidity and π-basicity that are most suitable for p- and n-type semiconductors of metal-organic molecules and nanomaterials; (iii) investigation of the metallo-aromaticity of multi-nuclear metal complexes; (iv) investigation of the kinetics and thermodynamics of copper-mediated nitrene insertion into C-H and H-H bond; and (v) accurate computations of dissociation energies of hydrogen-bonded DNA duplex moieties utilizing the resolution of identity correlation consistent composite approach (RI-ccCA).
Dan Beaty (1937-2002) was a prolific composer, pianist, researcher, educator, and writer. His large compositional output included chamber works, choral works, songs, orchestral pieces, electronic music, and keyboard works. Beaty was well versed in traditional Western music as well as the more avant-garde and perplexing idioms of the twentieth century. Beaty's compositions reflect the many fascinating, if not always popular, musical trends of his time. His music encompasses styles from serial to jazz, shows compositional influences from Arnold Schoenberg to Indonesian music, and demonstrates thought-provoking and highly intellectual craftsmanship. This document explores several of Beaty's songs through a discussion of the composer's life and compositional process. Songs included in this document are Three Weeks Songs, October, November, A Sappho Lyric, Love Song, That Night When Joy Began, and War Lyrics. This document was written to accompany the author's DMA Lecture-Recital at the University of North Texas. Unfortunately, Beaty's vocal music was never published and is mostly unknown. One goal of the project was to initiate interest in Beaty's songs. Through this document, Lecture-Recital, and additional performances, considerable strides have been made to bring Beaty's songs to new audiences throughout the United States. In addition, the author has received permission from the Beaty family to publish Dan Beaty's songs.
Water-soluble Pt(II) phosphors exist predominantly for photophysical studies. However, fewer are known to be candidates for cisplatin derivatives. If such a molecule could exist, it would be efficient at not only destroying the cancerous cells which harm the body, but the destruction would also be traceable within the human body as it occurred. Herein, research accomplished in chemistry describes the photophysical properties of a water-soluble phosphor. Spectroscopically, this phosphor is unique in that it possesses a strong green emission at room temperature in aqueous media. Its emission is also sensitive to the gaseous environment. These properties have been expanded to both analytical and biological applications. Studies showing the potential use of the phosphor as a heavy metal remover from aqueous solutions have been accomplished. The removal of toxic heavy metals was indicated by the loss of emission as well as the appearance of a precipitate. The gaseous sensitivity was elicited to be used as a potential cancerous cell biomarker. In vivo studies were accomplished in a wide variety of species, including bacteria (E. coli), worms (C. elegans), small crustaceans (Artemia), and fish (D. rerio and S. ocellatus). The phosphor in question is detectable in all of the above. This fundamental research lays the foundation for further expansion into bioinorganic chemistry, and many other possible applications.
Nonlinear organic liquids that exhibit two-photon absorption (TPA) function as good optical limiters for sensor protection from laser pulses. L34 (4-butyl-4'-propyl-diphenylethyne) is a liquid organic compound exhibiting nonlinear optical absorption. A thiol- derivatized analog of L34 (“thiol-L34”) was prepared to bind the molecules to the surface of gold nanoparticles. Surface binding is necessary to investigate synergy between nonlinear optical absorption of gold nanoparticles and thiol-L34. Thiol-L34 was prepared in a six-step organic synthesis starting from 3-(4-bromophenyl) propionic acid. Au nanoparticles with <15 nm diameter have been prepared and sensitized with the thiol-L34 compound for assessment of their nonlinear optical behavior. Diazolylmethenes a class of metal-coordinating dyes that are similar to dipyrrins with some substitutions of nitrogen atoms in place of carbon atoms. Modification in the framework of dipyrrinoid dyes via this replacement of nitrogen for carbon atoms may lead to compounds that serve as effective agents for bioimaging and/or photodynamic therapy. Several routes to the synthesis of di-(1,2,3)-triazolylmethenes, di-(1,2,4)-triazolylmethenes, and ditetrazolylmethenes are presented.
This research focused on the development of new metal triimine complexes of Pt(II), Pd(II), and Ni(II) for use in three types of molecular electronic devices: dye sensitized solar cells (DSSCs), organic light-emitting diodes (OLEDs), and organic field effect transistors (OFETs). Inorganic complexes combine many advantages of their chemical and photophysical properties and are processable on inexpensive and large area substrates for various optoelectronic applications. For DSSCs, a series of platinum (II) triimine complexes were synthesized and evaluated as dyes for nanocrystalline oxide semiconductors. Pt (II) forms four coordinate square planar complexes with various co-ligands and counterions and leads to spanning absorption across a wide range in the UV-Vis-NIR regions. When those compounds were applied to the oxide semiconductors, they led to photocurrent generation thus verifying the concept of their utility in solar cells. In the OLEDs project, a novel pyridyl-triazolate Pt(II) complex, Pt(ptp)2 was synthesized and generated breakthrough OLEDs. In the solution state, the electronic absorption and emission of the square planar structure results in metal-to-ligand charge transfer (MLCT) and an aggregation band. Tunable photoluminescence and electroluminescence colors from blue to red wavelengths have been attained upon using Pt(ptp)2 under different experimental conditions and OLED architectures. In taking advantage of these binary characteristics for both monomer and excimer emissions, cool and warm white OLEDs suitable for solid-state lighting have been fabricated. The OFETs project represented an extension of the study of pyridyl-triazolate d8 metal complexes due to their electron-transporting behavior and n-type properties. A prescreening step by using thermogravimetric calorimetry has demonstrated the stability of all three M(ptp)2 and M(ptp)2(py)2 compounds and their amenability to sublimation. Preliminary current-voltage measurements from simple diodes has achieved unidirectional current from a Pt(ptp)2 neat layer and demonstrated its n-type semiconducting behavior.
Reductive functionalization of methyl ligands by 3d metal catalysts and two possible side reactions has been studied. Selective oxidation of methane, which is the primary component of natural gas, to methanol (a more easily transportable liquid) using organometallic catalysis, has become more important due to the abundance of domestic natural gas. In this regard, reductive functionalization (RF) of methyl ligands in [M(diimine)2(CH3)(Cl)] (M: VII (d3) through CuII (d9)) complexes, has been studied computationally using density functional techniques. A SN2 mechanism for the nucleophilic attack of hydroxide on the metal-methyl bond, resulting in the formation of methanol, was studied. Similar highly exergonic pathways with very low energy SN2 barriers were observed for the proposed RF mechanism for all complexes studied. To modulate RF pathways closer to thermoneutral for catalytic purposes, a future challenge, paradoxically, requires finding a way to strengthen the metal-methyl bond. Furthermore, DFT calculations suggest that for 3d metals, ligand properties will be of greater importance than metal identity in isolating suitable catalysts for alkane hydroxylation in which reductive functionalization is used to form the C—O bond. Two possible competitive reactions for RF of metal-methyl complexes were studied to understand the factors that lower the selectivity of C—O bond forming reactions. One of them was deprotonation of the methyl group, which leads to formation of a methylene complex and water. The other side reaction was metal-methyl bond dissociation, which was assessed by calculating the bond dissociation free energies of M3d—CH3 bonds. Deprotonation was found to be competitive kinetically for most of the 1st row transition metal-methyl complexes (except for CrII, MnII and CuII), but less favorable thermodynamically as compared to reductive functionalization for all of the studied 1st row transition metal complexes. Metal-carbon bond dissociation was found to be less favorable than the RF reactions for most 3d transition …
This dialog allows you to filter your current search.
Each of the Decades listed note their name and the number of records that will be limited down to if you choose that option.
This dialog allows you to filter your current search.
Each of the Years listed note their name and the number of records that will be limited down to if you choose that option.
The list can be sorted by name or the count.
This dialog allows you to filter your current search.
Each of the Months listed note their name and the number of records that will be limited down to if you choose that option.
This dialog allows you to filter your current search.
Each of the Rights Access listed note their name and the number of records that will be limited down to if you choose that option.
This dialog allows you to filter your current search.
Each of the Department listed note their name and the number of records that will be limited down to if you choose that option.
This dialog allows you to filter your current search.
Each of the Discipline listed note their name and the number of records that will be limited down to if you choose that option.
The list can be sorted by name or the count.
This dialog allows you to filter your current search.
Each of the Degree Level listed note their name and the number of records that will be limited down to if you choose that option.