131 Matching Results

Search Results

Results: 1 - 24 next
open access

Cyclic Polarization of AA 3102 in Corrosive Electrolytes Containing Sodium Chloride and Ammonium Sulfate

Description: Corrosion of all aluminum microchannel heat exchangers present a challenge in automotive and heating, ventilation, and air conditioning (HVAC) industries. Reproducibility of Salt Water Acetic Acid Test (SWAAT) has been questioned and a need to new corrosion tests with better reproducibility has risen. Cyclic polarization, that is an electrochemical test, was explored for its suitability for the assessment of AA 3102 tube material that is currently a popular aluminum alloy used in manufacturing… more
Date: December 2016
Creator: Dorreyatim, Mohammad
Partner: UNT Libraries
open access

Modeling of Hexagonal Boron Nitride Filled Bismalemide Polymer Composites for Thermal and Electrical Properties for Electronic Packaging

Description: Due to the multi-tasking and miniaturization of electronic devices, faster heat transfer is required from the device to avoid the thermal failure. Die-attached polymer adhesives are used to bond the chips in electronic packaging. These adhesives have to hold strong mechanical, thermal, dielectric, and moisture resistant properties. As polymers are insulators, heat conductive particles are inserted in it to enhance the thermal flow with an attention that there would be no electrical conductivity… more
Date: December 2016
Creator: Uddin, Md Salah
Partner: UNT Libraries
open access

Conceptual Framework for the Development of an Air Quality Monitoring Station in Denton, Texas

Description: Denton, Texas consistently reaches ozone nonattainment levels. This has led to a large focus of air pollution monitoring efforts in the region, with long-range transport being explored as a key contributor. For this study, the University of North Texas Discovery Park campus was chosen as a prospective location for an extensive air quality monitoring station. Sixteen years of ozone and meteorological data for five state-run monitoring sites within a 25 mile radius, including the nearest Denton A… more
Date: August 2016
Creator: Boling, Robyn
Partner: UNT Libraries
open access

Simulation Study of Tremor Suppression and Experiment of Energy Harvesting with Piezoelectric Materials

Description: The objective of this research is to develop a wearable device that could harvest waste mechanical energy of the human hand movement and utilize this energy to suppress wrist tremors. Piezoelectric material is used to measure the hand movement signals, and the signal of wrist tremor is filtered to be utilized to suppress the tremor. In order to conduct the experiment of energy harvesting and tremor suppression, an experimental rig was fabricated. Two types of piezoelectric materials, PVDF (poly… more
Date: August 2012
Creator: Ou, Jianqiang
Partner: UNT Libraries
open access

Performance Evaluation of UNT Apogee Stadium Wind Turbines

Description: The following report chronicles the University of North Texas Wind Turbine Project at Apogee Stadium. The timeline of events will include the feasibility study conducted by and for the university, grant awards from the Texas State Energy Conservation Office to fund the project, and a three-year sample of real time performance data since installation. The purpose of this case study is to compare the energy generation estimates by various stakeholders to the measured energy generation using a new… more
Date: May 2016
Creator: McCary, William D., III
Partner: UNT Libraries
open access

Quantification of Human Thermal Comfort for Residential Building's Energy Saving

Description: Providing conditioned and fully controlled room is the final goal for having a comfortable building. But on the other hand making smart controllers to provide the required cooling or heating load depending on occupants' real time feeling is necessary. This study has emphasized on finding a meaningful and steady state parameter in human body that can be interpreted as comfort criterion which can be expressed as the general occupants' sensation through their ambient temperature. There are lots of… more
Date: August 2016
Creator: Sharifani, Pooya
Partner: UNT Libraries
open access

Investigation of an Investment Casting Method Combined with Additive Manufacturing Methods for Manufacturing Lattice Structures

Description: Cellular metals exhibit combinations of mechanical, thermal and acoustic properties that provide opportunities for various implementations and applications; light weight aerospace and automobile structures, impact and noise absorption, heat dissipation, and heat exchange. Engineered cell topologies enable one to control mechanical, thermal, and acoustic properties of the gross cell structures. A possible way to manufacture complex 3D metallic cellular solids for mass production with a relativel… more
Date: August 2013
Creator: Kodira, Ganapathy D.
Partner: UNT Libraries
open access

Denim Fiberboard Fabricated from MUF and pMDI Hybrid Resin System

Description: In this study, a series of denim fiberboards are fabricated using two different resins, malamine urea formaldehyde (MUF) and polymeric methylene diphenyl diisocyanate (pMDI). Two experimental design factors (1) adhesive content and (2) MUF-pMDI weight ratio, were studied. All the denim fiberboard samples were fabricated following the same resin blending, cold-press and hot-press procedures. The physical and mechanical tests were conducted on the fiberboard following the procedures described in … more
Date: May 2019
Creator: Cui, Zhiying
Partner: UNT Libraries
open access

Effect of Surface Treatment on the Performance of CARALL, Carbon Fiber Reinforced Aluminum Dissimilar Material Joints

Description: Fiber-metal laminates (FML) are the advanced materials that are developed to improve the high performance of lightweight structures that are rapidly becoming a superior substitute for metal structures. The reasons behind their emerging usage are the mechanical properties without a compromise in weight other than the traditional metals. The bond remains a concern. This thesis reviews the effect of pre-treatments, say heat, P2 etch and laser treatments on the substrate which modifies the surface … more
Date: August 2017
Creator: Bandi, Raghava
Partner: UNT Libraries
open access

Characterization of Viscoelastic Properties of a Material Used for an Additive Manufacturing Method

Description: Recent development of additive manufacturing technologies has led to lack of information on the base materials being used. A need arises to know the mechanical behaviors of these base materials so that it can be linked with macroscopic mechanical behaviors of 3D network structures manufactured from the 3D printer. The main objectives of my research are to characterize properties of a material for an additive manufacturing method (commonly referred to as 3D printing). Also, to model viscoelasti… more
Date: December 2013
Creator: Iqbal, Shaheer
Partner: UNT Libraries
open access

Errors in skin temperature measurements.

Description: Numerical simulation is used to investigate the accuracy of a direct-contact device for measuring skin-surface temperature. A variation of thermal conductivity of the foam has greater effect on the error rather than a variation of the blood perfusion rate. For a thermal conductivity of zero, an error of 1.5 oC in temperature was identified. For foam pad conductivities of 0.03 and 0.06 W/m-oC, the errors are 0.5 and 0.15 oC. For the transient study, with k=0 W/m-oC, it takes 4,900 seconds fo… more
Date: December 2008
Creator: Dugay, Murielle
Partner: UNT Libraries
open access

Development of a Natural Fiber Mat Plywood Composite

Description: Natural fibers like kenaf, hemp, flax and sisal fiber are becoming alternatives to conventional petroleum fibers for many applications. One such applications is the use of Non-woven bio-fiber mats in the automobile and construction industries. Non-woven hemp fiber mats were used to manufacture plywood in order to optimize the plywood structure. Hemp fiber mats possess strong mechanical properties that comparable to synthetic fibers which include tensile strength and tensile modulus. This study … more
Date: August 2017
Creator: Anthireddy, Prasanna Kumar
Partner: UNT Libraries
open access

Using a Multimodal Sensing Approach to Characterize Human Responses to Affective and Deceptive States

Description: Different ways to measure human affective and deceptive reactions to stimulus have been developed. One method is a multimodal approach using web camera, thermal imaging camera and physiological sensors data to extract different features in the human face (verbal and non-verbal behavior) such as breathing rate, heart rate, face temperature, skin conductance, eye tracking, language analysis and facial expressions among others. Human subjects from different ages and ethnicity were exposed to two d… more
Date: May 2013
Creator: Narvaez-Valle, Alexis
Partner: UNT Libraries
open access

Using a Multimodal Sensing Approach to Characterize Human Thermal Comfort Level

Description: A method to distinguish human level of comfort has been developed by using a thermal camera, physiological sensors, and a surroundings sensor. The method has successfully collected data from hominal facial features, breathing rate, skin temperature, room temperature, blood volume pressure, relative humidity, and air velocity. Participants from all genders and races were involved in two sessions of a human comfort experiment including a psychology survey session. The variables, such as room temp… more
Date: December 2013
Creator: Wicaksono, Cakra Aditya
Partner: UNT Libraries
open access

Electrodepostion of Iron Oxide on Steel Fiber for Improved Pullout Strength in Concrete

Description: Fiber-reinforced concrete (FRC) is nowadays extensively used in civil engineering throughout the world due to the composites of FRC can improve the toughness, flexural strength, tensile strength, and impact strength as well as the failure mode of the concrete. It is an easy crazed material compared to others materials in civil engineering. Concrete, like glass, is brittle, and hence has a low tensile strength and shear capacity. At present, there are different materials that have been employed … more
Date: August 2014
Creator: Liu, Chuangwei
Partner: UNT Libraries
open access

Deleterious Synergistic Effects of Concurrent Magnetic Field and Superparamagnetic (Fe3O4) Nanoparticle Exposures on CHO-K1 Cell Line

Description: While many investigations have been performed to establish a better understanding of the effects that magnetic fields and nanoparticles have on cells, the fundamental mechanisms behind the interactions are still yet unknown, and investigations on concurrent exposure are quite limited in scope. This study was therefore established to investigate the biological impact of concurrent exposure to magnetic nanoparticles and extremely-low frequency magnetic fields using an in-vitro CHO-K1 cell line mo… more
Date: May 2015
Creator: Coker, Zachary
Partner: UNT Libraries
open access

Quasi-Three Dimensional Experiments on Liquid-Solid Fluidized Bed of Three Different Particles in Two Different Distributors

Description: This thesis is an experimental study of the fluidization of binary mixture in particulate flows. A fluidized bed with two distributors was built with water being used as carrying fluid. Three types of solid particles of nylon, glass and aluminum of the same size and different densities are used in the experiments. The wall effect on a single particle fluidization, the fluidization of binary mixture of large density difference (nylon and aluminum of density ratio of 0.42), and the fluidization… more
Date: December 2009
Creator: Obuseh, Chukwuyem Charles
Partner: UNT Libraries
open access

The Perceived Value Among Employers of College Study Abroad for Engineers

Description: Engineering graduates of the twenty-first century must be worldly and understand how to work with professionals from many cultures on projects that cross international boundaries. Increasingly, employers are finding that prospective employees who have studied abroad make better, more rounded candidates than those who have no life experience outside of their home region. The objective of this study was to determine whether engineering students who participate in a major-specific, study abroad ex… more
Date: August 2012
Creator: Heiden, Christopher H.
Partner: UNT Libraries
open access

Electromagnetic Shielding Properties of Iron Oxide Impregnated Kenaf Bast Fiberboard

Description: The electromagnetic shielding effectiveness of kenaf bast fiber based composites with different iron oxide impregnation levels was investigated. The kenaf fibers were retted to remove the lignin and extractives from the pores in fibers, and then magnetized. Using the unsaturated polyester and the magnetized fibers, kenaf fiber based composites were manufactured by compression molding process. The transmission energies of the composites were characterized when the composite samples were exposed… more
Date: December 2014
Creator: Ding, Zhiguang
Partner: UNT Libraries
open access

A Performance Analysis of Solar Chimney Passive Ventilation System in the Unt Zero Energy Lab

Description: The purpose of this investigation is to find out suitability of the solar chimney natural ventilation system in a Zero Energy Lab located at the University of North Texas campus, to figure out performance of the solar chimney. Reduction in the heating and ventilation and air conditioning energy consumption of the house has been also analyzed. The parameters which are considered for investigation are volumetric flow rate of outlet of chimney, the absorber wall temperature and glass wall tempera… more
Date: August 2013
Creator: Talele, Suraj H.
Partner: UNT Libraries
open access

Laminar Natural Convection From Isothermal Vertical Cylinders

Description: Laminar natural convection heat transfer from the vertical surface of a cylinder is a classical subject, which has been studied extensively. Furthermore, this subject has generated some recent interest in the literature. In the present investigation, numerical experiments were performed to determine average Nusselt numbers for isothermal vertical cylinders (103 < RaL < 109, 0.5 < L/D <10, and Pr = 0.7) with and without an adiabatic top in a quiescent ambient environment which will allow for plu… more
Date: August 2012
Creator: Day, Jerod
Partner: UNT Libraries
open access

Estimating Thermal Conductivity and Volumetric Specific Heat of a Functionally Graded Material using Photothermal Radiometry

Description: Functionally graded materials (FGMs) are inhomogeneous materials in which the material properties vary with respect to space. Research has been done by scientific community in developing techniques like photothermal radiometry (PTR) to measure the thermal conductivity and volumetric heat capacity of FGMs. One of the problems involved in the technique is to solve the inverse problem, i.e., estimating the thermal properties after the frequency scan has been obtained. The present work involves fin… more
Date: December 2017
Creator: Koppanooru, Sampat Kumar Reddy
Partner: UNT Libraries
open access

Highly Stretchable Miniature Strain Sensor for Large Dynamic Strain Measurement

Description: This thesis aims to develop a new type of highly stretchable strain sensor to measure large deformation of a specimen subjected to dynamic loading. The sensor was based on the piezo-resistive response of carbon nanotube(CNT)/polydimethysiloxane (PDMS) composites thin films, some nickel particles were added into the sensor composite to improve the sensor performance. The piezo-resistive response of CNT composite gives high frequency response in strain measurement, while the ultra-soft PDMS matri… more
Date: May 2016
Creator: Yao, Shulong
Partner: UNT Libraries
open access

Tesla Turbine Torque Modeling for Construction of a Dynamometer and Turbine

Description: While conventional turbines have been extensively researched and tested, Tesla and boundary layer type turbines have not. In order to construct a dynamometer, thermodynamic flow apparatus and future turbines, we modeled the Tesla turbine using theoretical calculations and preliminary experiments. Thus a series of experiments were run to determine stall torque and maximum run speed for a known pressure range. This data was then applied to modeling formulas to estimate stall torque over an extend… more
Date: May 2011
Creator: Emran, Tamir Ali
Partner: UNT Libraries
Back to Top of Screen