65 Matching Results

Search Results

Results: 1 - 24 next
open access

Static and Flow Properties of Dilute Polymer Solutions

Description: Small weight percentages of certain high-molecular weight polymers added to liquids in turbulent flow through conduits can result in dramatic friction reduction. Although many current and potential uses of the drag reduction phenomenon exist, there is a fundamental problem: drag reduction efficacy decreases rapidly with flow time due to the mechanical degradation in flow of the added polymer. In this thesis study, dilute aqueous solutions of polyacrylamide were tested under turbulent flow condi… more
Date: August 1991
Creator: Whang, Kyu-ho
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Synthesis and 2-D NMR Analysis of a New Phenyl-Substituted Polycyclic Compound

Description: Diels-Alder [4+2] cycloaddition of a mixture of 1- and 2 methylcyclopentadiene to 2-phenyl-g.-benzoquinone affords a mixture of four nd cycloadducts. A single, isomerically pure cycloadduct was isolated by careful column chromatography. Stereospecific reduction of this material with sodium borohydride and cerium(III) chloride 'affords a single, isomerically pure tricyclic diol. The structures of the cycloadduct and this tricyclic diol, established via analysis of their one- and two-dimensionial… more
Date: May 1991
Creator: Tsay, Fuh-Rong
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Polymer Liquid Crystal (PLC) and Polypropylene Interlayers in Polypropylene and Glass Fiber Composites: Mechanical Properties

Description: In recent developments of composite materials, scientists and engineers have come up with fibers as well as matrices for composites and techniques of blending high cost components with low cost materials. Thus, one creates cost effective composite materials that are as efficient as space age components. One of the major breakthroughs in this area is the innovation of molecular composites, specifically polymeric liquid crystals (PLCs). These materials have excellent mechanical properties such as… more
Date: December 2000
Creator: Maswood, Syed
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Effects of HALSs and Nano-ZnO Worked as UV Stabilizers of Polypropylene

Description: This work reports the outdoor weathering performance of ultraviolet (UV)-stabilized polypropylene (PP) products (using PP resins from Encore Wire). Different hindered amine light stabilizers (HALSs) and nano-ZnO were used to stabilize PP-film-based formulations that were exposed under UV light for 6 weeks simulating for in harsh outdoor weather of Dallas, Texas, USA in 2016. Characterization of the exposed PP film products was done in terms of mechanical and friction spectroscopic properties. T… more
Date: December 2017
Creator: Lu, Xinyao
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Techniques Utilized in the Characterization of Existing Materials for Improved Material Development

Description: It has become increasingly important to remain on the cutting edge of technology for a company to remain competitive and survive in today's high-tech industries. To do this, a company needs various resources dedicated to this cause. One of these resources is the use of existing materials, as starting points, for which improved materials can be based. For this, a company must rely on the characterization of existing materials to bring that base technology into their company. Through this evaluat… more
Date: December 2001
Creator: Withaeger, Gary
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Improving the Long-term Performance of PVC Compositions

Description: PVC are extensively applied in many fields, such as cables, pipes, vehicles, shoes, toys and infusion bags. Generally, plasticizers are blended with PVC to improve the ability of process in industrial production; however, the toxic plasticizers will gradually migrate to the surface of products and such a leakage results in brittleness of plasticized PVC and environmental pollution. In other words, humans are frequently exposed to the potential risks. According to previous researches, cross-link… more
Date: December 2016
Creator: Yang, Yu Chia
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Preventing Thermal Degradation of Pvc Insulation by Mixtures of Cross-Linking Agents and Antioxidants

Description: Poly(vinyl chloride)(PVC) wire and cable insulation has poor thermal stability, causing the plasticizer to separate from the PVC chain and produce an oily residue, lowering the tensile elongation at break and thus increasing brittleness. We have added 4 wt.% of three different types of cross-linking agents and antioxidants, as well as mixtures of both, to improve the thermal stability of the plasticizer and tensile properties of PVC after thermal exposure. We performed tensile tests, tribologic… more
Date: May 2018
Creator: Kim, Taehwan
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Defining a Relationship between the Flexibility of Materials and Other Properties

Description: Brittleness of a polymeric material has a direct relationship with the material's performance and furthermore shares an inverse relationship with that material's flexibility. The concept of flexibility of materials has been understood but merely explained with a hand-waving manner. Thus, it has never been defined by a calculation, thereby lacking the ability to determine a definite quantitative value for this characteristic. Herein, an equation is presented and proven which makes determining th… more
Date: May 2018
Creator: Osmanson, Allison Theresa
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Modified epoxy coatings on mild steel: A study of tribology and surface energy.

Description: A commercial epoxy was modified by adding fluorinated poly (aryl ether ketone) and in turn metal micro powders (Ni, Al, Zn, and Ag) and coated on mild steel. Two curing agents were used; triethylenetetramine (curing temperatures: 30 oC and 70 oC) and hexamethylenediamine (curing temperature: 80 oC). Variation in tribological properties (dynamic friction and wear) and surface energies with varying metal powders and curing agents was evaluated. When cured at 30 oC, friction and wear decreased sig… more
Date: August 2009
Creator: Dutta, Madhuri
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Atomistic Computer Simulations of Diffusion Mechanisms in Lithium Lanthanum Titanate Solid State Electrolytes for Lithium Ion Batteries

Description: Solid state lithium ion electrolytes are important to the development of next generation safer and high power density lithium ion batteries. Perovskite-structured LLT is a promising solid electrolyte with high lithium ion conductivity. LLT also serves as a good model system to understand lithium ion diffusion behaviors in solids. In this thesis, molecular dynamics and related atomistic computer simulations were used to study the diffusion behavior and diffusion mechanism in bulk crystal and gra… more
Date: August 2014
Creator: Chen, Chao-Hsu
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Characterization of Cure Kinetics and Physical Properties of a High Performance, Glass Fiber-Reinforced Epoxy Prepreg and a Novel Fluorine-Modified, Amine-Cured Commercial Epoxy.

Description: Kinetic equation parameters for the curing reaction of a commercial glass fiber reinforced high performance epoxy prepreg composed of the tetrafunctional epoxy tetraglycidyl 4,4-diaminodiphenyl methane (TGDDM), the tetrafunctional amine curing agent 4,4'-diaminodiphenylsulfone (DDS) and an ionic initiator/accelerator, are determined by various thermal analysis techniques and the results compared. The reaction is monitored by heat generated determined by differential scanning calorimetry (DSC) a… more
Date: December 2003
Creator: Bilyeu, Bryan
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Determination of Wear in Polymers Using Multiple Scratch Test.

Description: Wear is an important phenomenon that occurs in all the polymer applications in one form or the other. However, important links between materials properties and wear remain illusive. Thus optimization of material properties requires proper understanding of polymer properties. Studies to date have typically lacked systematic approach to all polymers and wear test developed are specific to some polymer classes. In this thesis, different classes of polymers are selected and an attempt is made to us… more
Date: August 2004
Creator: Damarla, Gowrisankar
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Definition of Brittleness: Connections Between Mechanical and Tribological Properties of Polymers.

Description: The increasing use of polymer-based materials (PBMs) across all types of industry has not been matched by sufficient improvements in understanding of polymer tribology: friction, wear, and lubrication. Further, viscoelasticity of PBMs complicates characterization of their behavior. Using data from micro-scratch testing, it was determined that viscoelastic recovery (healing) in sliding wear is independent of the indenter force within a defined range of load values. Strain hardening in sliding we… more
Date: August 2008
Creator: Hagg Lobland, Haley E.
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Surface Topography and Aesthetics of Recycled Cross-Linked Polyethylene Wire and Cable Coatings

Description: Our research focuses on re-using a waste a material, cross-linked polyethylene abbreviated XLPE, which is a widely used coating for wires. XLPE is strong and has excellent thermal properties due to its chemical structure - what leads to the significance of recycling this valuable polymer. Properties of XLPE include good resistance to heat, resistance to chemical corrosion, and high impact strength. A wire is usually composed of a metal core conductor and polymeric coating layers. One creates a … more
Date: December 2014
Creator: Xie, Wa
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Effects of Processing Techniques on Mechanical Properties of Selected Polymers

Description: The mechanical properties of a polymer represent the critical characteristics to be considered when determining the applications for it. The same polymer processed with different methods can exhibit different mechanical properties. The purpose of this study is to investigate the difference in mechanical properties of the selected polymers caused by different processing techniques and conditions. Three polymers were studied, including low density polyethylene (LDPE), polypropylene (PP), and NEXP… more
Date: May 2013
Creator: Dong, Yao
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Work Function Study of Iridium Oxide and Molybdenum Using UPS and Simultaneous Fowler-Nordheim I-V Plots with Field Emission Energy Distributions

Description: The characterization of work functions and field emission stability for molybdenum and iridium oxide coatings was examined. Single emission tips and flat samples of molybdenum and iridium oxide were prepared for characterization. The flat samples were characterized using X-ray Photoelectron Spectroscopy and X-ray diffraction to determine elemental composition, chemical shift, and crystal structure. Flat coatings of iridium oxide were also scanned by Atomic Force Microscopy to examine topography… more
Date: August 1999
Creator: Bernhard, John Michael
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Micro and nano composites composed of a polymer matrix and a metal disperse phase.

Description: Low density polyethylene (LDPE) and Hytrel (a thermoplastic elastomer) were used as polymeric matrices in polymer + metal composites. The concentration of micrometric (Al, Ag and Ni) as well as nanometric particles (Al and Ag) was varied from 0 to 10 %. Composites were prepared by blending followed by injection molding. The resulting samples were analyzed by scanning electron microscopy (SEM) and focused ion beam (FIB) in order to determine their microstructure. Certain mechanical properties of… more
Date: December 2007
Creator: Olea Mejia, Oscar Fernando
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Sustainable Ecofriendly Insulation Foams for Disaster Relief Housing

Description: Natural disasters are affecting a significant number of people around the world. Sheltering is the first step in post-disaster activities towards the normalization of the affected people's lives. Temporary housing is being used in these cases until the construction of permanent houses are done. Disposal of temporary housing after use is leading to a significant environmental impact because most of them are filled with thermally insulative polymer foams that do not degrade in a short period. To … more
Date: May 2017
Creator: Chitela, Yuvaraj Reddy
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Morphological properties of poly (ethylene terephthalate) (PET) nanocomposites in relation to fracture toughness.

Description: The effect of incorporation of montmorillonite layered silicate (MLS) on poly (ethylene terephthalate) (PET) matrix was investigated. MLS was added in varying concentration of 1 to 5 weight percent in the PET matrix. DSC and polarized optical microscopy were used to determine the crystallization effects of MLS addition. Non isothermal crystallization kinetics showed that the melting temperature and crystallization temperature decrease as the MLS percent increases. This delayed crystallization a… more
Date: August 2005
Creator: Pendse, Siddhi
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Thermoplastic and Thermoset Natural Fiber Composite and Sandwich Performance

Description: The objective of this thesis is to investigate the effects of adding natural fiber (kenaf fiber, retted kenaf fiber, and sugarcane fiber) into polymer materials. The effects are obtained by considering three main parts. 1. Performance in thermoplastic composites. The effect of fiber retting on polymer composite crystallization and mechanical performance was investigated. PHBV/PBAT in 80/20 blend ratio was modified using 5% by weight kenaf fiber. Dynamic mechanical analysis of the composites was… more
Date: May 2014
Creator: Yang, Bing
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Fabrication of the Novel Asymmetric Polymeric Materials via Bottom-Up Approach

Description: Asymmetric polymeric materials can be formed by either top-down or bottom-up methods. Bottom-up methods involve assembling the atoms and molecules to form small nanostructures by carefully controlled synthesis, which results in a reduction of some of the top-down limitations. In this dissertation, thermal, tribological and antireflective properties of polymeric materials have been enhanced by introducing structural asymmetry. The overall performance of commercial polymeric coatings, e.g. epoxy … more
Date: May 2022
Creator: Hnatchuk, Nataliia
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

The Electron Emission Characteristics of Aluminum, Molybdenum and Carbon Nanotubes Studied by Field Emission and Photoemission.

Description: The electron emission characteristics of aluminum, molybdenum and carbon nanotubes were studied. The experiments were setup to study the emission behavior as a function of temperature and exposure to oxygen. Changes in the surface work function as a result of thermal annealing were monitored with low energy ultra-violet photoelectron spectroscopy for flat samples while field emission energy distributions were used on tip samples. The change in the field emission from fabricated single tips expo… more
Date: December 2002
Creator: Sosa, Edward Delarosa
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

The Physics of Gaseous Exposures on Active Field Emission Microcathode Arrays

Description: The interaction of active molybdenum field emission microcathode arrays with oxygen, water, carbon dioxide, methane, hydrogen and helium gases was studied. Experiments were setup to measure the emission characteristics as a function of gas exposures. The resulting changes in the surface work function of the tips were determined from the Fowler-Nordheim plots. The kinetics of the FEA-gas interaction were studied by observing the ion species originating from the array during and after gas exposur… more
Date: September 1996
Creator: Chalamala, Babu Reddy
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
open access

Maleic anhydride grafted polypropylene coatings on steel: Adhesion and wear.

Description: Polymeric coatings are being used in a growing number of applications, contributing to protection against weather conditions and localized corrosion, reducing the friction and erosion wear on the substrate. In this study, various polypropylene (PP) coatings were applied onto steel substrates by compression molding. Chemical modification of PP has been performed to increase its adhesion to metallic surfaces by grafting of maleic anhydride (MAH) onto PP in the presence of dicumyl peroxide (DCP). … more
Date: May 2010
Creator: Mahendrakar, Sridhar
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries
Back to Top of Screen