2,794 Matching Results

Search Results

Results: 1 - 24 next

Hydrogeochemical and Stream Sediment Reconnaissance Basic Data for Grand Island NTMS Quadrangle, Nebraska; Kansas: Appendix C

Description: Data collected as part of a hydrogeochemical and stream sediment reconnaissance of Grand Island NTMS quadrangle in Kansas and Nebraska including laboratory data on well water and stream sediments as well as field data.
Date: July 31, 1980
Creator: National Uranium Resource Evaluation Program
Item Type: Refine your search to only Dataset
Partner: UNT Libraries Government Documents Department
open access

Experimental Radiation Measurements in Conventional Structures: Part 1, Radiation Measurements in Two Two-Story and Three One-Story Typical Residential Structures Before and After Modification

Description: Report discussing the methods, data, and analysis of results for "An experimental study designed to provide a basis for estimating protection against fallout radiation " (p. v) using one- and two-story structures with basements.
Date: July 1966
Creator: Burson, Z. G.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A Nuclear Reactor System for Generating Power and Supplying Steam to a Water Desalination Plant in the Florida Keys

Description: From foreword: The results of an engineering study directed toward the evaluation and selection of a nuclear reactor system designed to produce electricity and furnish steam to a water desalination plant in the Florida Keys are given in this report.
Date: March 1964
Creator: Burns and Roe
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Mechanical Properties of Zirconium and Zirconium-Uranium Alloys Containing Tin

Description: Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."
Date: September 29, 1952
Creator: Schwope, A. D.; Muehlenkamp, G. T. & Chubb, Walston
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Mechanical Properties of Zirconium and Zirconium-Uranium Alloys Containing Tin

Description: Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."
Date: September 29, 1952
Creator: Schwope, A. D.; Muehlenkamp, G. T. & Chubb, Walston
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Ductility of Brazed Stainless Steel Joints

Description: Abstract: "The ductility of Type 310 stainless steel T-joints brazed with GE-62 brazing alloy was measured at room temperatures 1200, 1650, and 1800 F. The measure of ductility was taken as the plastic axial strain required to crack braze fillets in T-section tensile specimens. At elevated temperatures, the ductility of as-brazed joints approximated that of the stainless steel, but at room temperature the brazed joints had only one-tenth the ductility of the base metal. Annealing for 16 hr at 1… more
Date: July 8, 1953
Creator: Saller, Henry A.; Stacy, J. T. & Eddy, N. S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Nuclear Port Survey of the State of New York

Description: Report of the capabilities of the state of New York to construct and service atomic propelled vessels and to handle the shipment of packaged radioactive materials, including used nuclear fuels.
Date: November 1961
Creator: Ebasco Services Incorporated
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Extrusion Cladding of Fuel Element

Description: From introduction: "This investigation was undertaken with the general objective of determining whether uranium core could be sheathed with aluminum by an extrusion-cladding process. The ultimate objective of this work was to determine the feasibility of extrusion cladding flat plates of uranium."
Date: March 22, 1955
Creator: Slunder, C. J.; Fiorentino, R. J. & Hall, A. M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Electroplated Metals on Uranium for Aluminum Cladding

Description: Abstract: "Aluminum-clad nickel-plated uranium is corrosion resistant in boiling water. Samples with intentional defects in the aluminum-nickel clodding layers, after testing for more than 300 hr. showed no sign of rapid failure. The study of electroplated metals on uranium for aluminum cladding has defined the effects of several processing variables on the corrosion resistance. The quality of the uranium and the quality of the aluminum-nickel bond were important. Heat treatment and vacuum outg… more
Date: May 4, 1955
Creator: Beach, John G.; Schickner, William C.; Hopkinson, Dolores. & Faust, Charles L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Ceramic Investigations of UO₂

Description: This report covers the progress made on an intensive program to develop and evaluate UO2 as a possible fuel element for the PWR.
Date: June 16, 1955
Creator: Allison, Adrian G. & Duckworth, Winston H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Mineralogy of Uranium-Bearing Deposits in the Boulder Batholith, Montana: Final Report, July 1, 1952 to December 31, 1956

Description: From introduction: This report describes the program of research on mineralogy and petrography of certain uraniferous vein deposits in the Boulder batholith of western Montana.
Date: October 23, 1957
Creator: Wright, Harold D.; Bieler, Barrie H.; Emerson, D. O. & Shulhof, W. P.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Fitness-for-Service Criteria for Assessing the Significance of Fatigue Cracks in Offshore Structure

Description: Abstract: Results of a research program to develop fitness-for-service criteria for assessing the significance of fatigue cracks in offshore structures are presented in five papers. Each paper describes the goals and approaches to a specific task and details the results of the study.
Date: August 1985
Creator: Cheng, Yi-Wen
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

VOR Calibration Services

Description: from Introduction: The National Bureau of Standards has designed, constructed, and evaluated a standard for the support of very-high-frequency omnidirectional range (VOR) air navigation aids. The standard consists of two instruments: (1) a digital waveform signal generator for the composite VOR audio waveform, and (2) a standard phasemeter based on time series analysis of this waveform. Experimental results, a statistical analysis of them, and the principal software listings are included.
Date: April 1985
Creator: Larsen, Neil T.; Vecchia, Dominic F. & Sugar, George R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Fabrication of Subassemblies for the Supercritical-Water Reactor

Description: In studies of the fabrication of fuel subassemblies for the supercritical-water reactor, the limited ductility of stainless steel-UO₂ fuel sheet made the fabrication of corrugated-flat-plate-type subassemblies impractical. A fabricable MTR-type assembly, 5/8 in. square and 30 in. long, was developed. Methods for edge cladding fuel sheet were developed and a brazing alloy, GE-75, was found to be corrosion resistant in supercritical water.
Date: August 16, 1954
Creator: Keeler, J. R. & Hare, Alan W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Effects of Chemical Impurities on the Quality of Rolled Uranium Rod

Description: Abstract: "Thirty-four uranium ingots containing controlled amounts of carbon, nitrogen, and Mgl2 slag were cast, rolled, and examined to investigate the relation between these impurities and the quality of the rolled rod. Carbon in concentrations up to 1400 ppm and nitrogen up to 170 ppm, either singly or in combination, had no significant effect on the number of defects observed in the rolled rod. The quality of the rods, however decreased with increasing amount of slag necessary to cause obs… more
Date: October 1, 1954
Creator: Saller, Henry A.; Keeler, J. R. & Cuddy, L. J.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Study of Remote Military Power Applications: Report 5, NORAD

Description: From introduction: The study is essentially an economic evaluation of the construction and operation of nuclear power plants at several designated military installations where increased power generating capabilities of 5 to 40 mwe may be required by the Government during the period 1963 through 1970.
Date: July 1960
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Uranium Migration in UO₂-Bearing Ceramics

Description: This report follows a preliminary study on uranium migration in pressed and sintered UO2-bearing bodies based on MoSi2 or Al2O3.
Date: September 4, 1953
Creator: Quirk, J. F.; Smalley, A. K.; Duckworth, W. H. & Ferrell, Edward Francis.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Sanitary Engineering Aspects of Long-Range Fallout from Nuclear Detonations

Description: From abstract: Results of a study of the sanitary engineering aspects of fallout from nuclear weapons are reported. Data were obtained from: a. Weekly surface water samples from 22 stations on streams and reservoirs in Eastern Massachusetts, collected from March, 1952 to July, 1953, and assayed for radioactivity. b. Weekly rain samples from March to July, 1953. c. Stream mud and soil samples collected before and after a large fallout. d. Results of fallout activity measurements by others based … more
Date: 1955
Creator: Bell, Carlos G., Jr.
Item Type: Refine your search to only Thesis or Dissertation
Partner: UNT Libraries Government Documents Department
open access

Study of Remote Military Power Applications: Report 7, Super Sage Rocky Mountains Area

Description: From introduction: The study is essentially an economic evaluation of the construction and operation of nuclear power plants at several designated military installations where increased power generating capabilities of 5 to 40 mwe may be required by the Government during the period 1963 through 1970.
Date: July 1960
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Evaluation and Consolidation of Electrolytic Thorium

Description: Abstract: "Sound, fabricable ingots of thorium were produced by triple are melting of electrolytic thorium. Consumable electrodes were fabricated by tack welding of cold-pressed and vacuum-sintered bars of the granular thorium electrodeposited from a molten-salt bath. The hydrogen content of the electrodeposited material was reduced from 80 to 4 ppm by vacuum sintering at 1250 C at pressures below 1 x 10-(-3) mm of mercury. Both sodium and chlorine content were reduced during melting; sodium fr… more
Date: June 15, 1955
Creator: Saller, Henry A.; Dickerson, Ronald F. & Foster, Ellis L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Grain Refinement of the As-Cast Uranium-5 w/o Chromium Alloy by Ternary Additions

Description: Abstract: "Refinement of grain size of the base uranium-chromium eutectic alloy (uranium-5 w/o chromium) by ternary additions is discussed. Thirteen additions to the base alloy were investigated, and three additions were found to exhibit worthwhile grain-refinement tendencies. The three alloys, uranium-5 w/o chromium-0.2 w.o molybdenum, uranium-5 w/o chromium-0.2 w/o germanium, and uranium-5 w/o chromium-0.2 w/o niobium, were heat treated to produce final grain-size structures of between 0.015 … more
Date: July 5, 1955
Creator: Saller, Henry A.; Dickerson, Ronald F.; Murr, William E. & Bauer, Arthur A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen