92 Matching Results

Search Results

Results: 1 - 24 next
open access

Proposed R.F. Buncher for A-12

Description: A buncher and pre-accelerator for A-12 is described that has 360 degree acceptance and could handle a current of one ampere from a low voltage source.
Date: June 25, 1952
Creator: Colgate, S. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

In-Core Instrumentation Development Program Quarterly Progress Report June - September 1963

Description: Introduction: The objective of Project Agreement 22 is to determine the feasibility of covering the complete reactor neutron flux start range from 10(3) - 5 x 10(13) nv by using in-core chambers. The counting mode of operating will be used at low neutron fluxes and the root mean square voltage fluctuation mode will be used at high neutron flux levels. Experiments have been run utilizing various ion chambers, gases, gas pressures, voltage, and cables to measure sensitivities and range operating … more
Date: October 1963
Creator: DuBridge, R. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

In-Core Instrumentation Development Program Quarterly Progress Report September - December 1963

Description: Introduction: The objective of Project Agreement 22 is to determine the feasibility of using in-core ion chambers to cover the complete reactor neutron flux startup range from 10(4) -5 - 10(13) nv using in-core ion chambers. The counting mode of operation will be used at low neutron flux levels and the RMS voltage fluctuation mode (Campbell Theorem) will be used at high neutron flux levels. The June-September Progress Report (GEAP-4386) shows how the RMS voltage mode can be used, discusses c… more
Date: January 1964
Creator: DuBridge, R. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Mechanical, Fluid Flow, and Heat Transfer Out-Of-Pile Tests on EVESR MKI Prototype Fuel Bundle

Description: Summary: An EVESR MKI prototype fuel bundle was fully instrumented and operated intermittently for a 5-month period at the Pacific Gas and Electric Company’s Moss Landing Power Station. The vessel was operated up to 1000 psi with steam flows from 3000 to 26,600 lb/h, and steam inlet temperatures up to 825 degrees F. Data was recorded for blowout, vibration, flow distribution, heat transfer and pressure drop. The mechanical integrity of the fuel bundle, riser, and jumper system was satisfact… more
Date: February 1964
Creator: Polomik, E. E.; Fritz, J. R. & Ianni, P. W.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Nuclear Superheat Quarterly Project Report: Eighteenth Quarter, November, 1963-January, 1964

Description: From introduction: "This is the eighteenth in a series of quarterly reports which cover the progress and results from the conceptual designs, economic evaluations and research and development work performed by the General Electric Company as part of Contract AT(01-3)-189, Project Agreement No. 13."
Date: February 15, 1964
Creator: Flock, W. L. & Imhoff, D. H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Preoperational Power Stability Analysis of the Consumers Big Rock Point Plant

Description: Summary: An analytical study of the stability of the Big Rock Nuclear Reactor has been performed for the plant as built, and supplements a previous design stability study. The plant has been determined by this analysis to be very stable under every mode of operation anticipated during Phase I of the development program testing. Even under conservative assumptions of system parameters the minimum calculated gain and phase margins do not go below 13.0 db and 46 degrees, respectively. (Nor are … more
Date: February 1964
Creator: Case, J. M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Two-Phase Pressure Losses Quarterly Progress Report: Eighth Quarter, November 12, 1963 - February 11, 1964

Description: Technical report describing that voids were measured in a ½-inch by 1-3/4-inch channel with the S-1 insert (B(0)/B(1) = 0.4, L(0) = 0.1 inch), at 2 inches ahead of the insert (position A), ½-inch past the insert (position B), 5 inches past (position C), and 12 inches past (position D). The conditions were: P – 1000 psia, G = 1.00 x 10(6) lb/h-ft(2), and x = 18.8 percent. Average void and void distribution at position A are the same as for flow in a straight channel. Void distribution at posi… more
Date: March 1, 1964
Creator: Janssen, E. (Engineer) & Kervinen, J. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

High Power Density Development Project: Sixteenth Quarterly Progress Report, January-March 1964

Description: Development of nuclear reactor cores having high power density, long fuel life, and low fabrication costs is the objective of this program sponsored by the AEC. Five tasks are in progress: (1) Task 1A-High Power Density Fuel Development, (2) Task 1B-Fuel Fabrication Development. Assembly, (3) Task II-Stability, Heat Transfer and Fluid Flow, (4) Task III-Physics Development, and (5) Task IV-Co-Ordination and Test Planning.
Date: April 1, 1964
Creator: Holladay, R. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

In-Core Instrumentation Development Program Quarterly Progress Report January - March 1964

Description: The objective of Project Agreement 22 is to determine the feasibility of using in-core ion chambers to cover the complete reactor neutron flux startup range from 10(4) -5 - 10(13) nv using in-core ion chambers. This technical report discusses the following topics: low versus high cable termination impedance, amplifier considerations, noise considerations, gas and pressure selection, cable selection, effect of gamma, effect of temperature, and remaining problems.
Date: April 1964
Creator: DuBridge, R. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Ozone and Nitrogen Oxide Production by Irradiation of Air

Description: In regard to the production of ozone and various nitrogen oxides in air by action of x-rays or gamma rays, thre seems to be no direct experimental data which can be used. There is some data on the action of alpha particles on air and some on the action of cathode rays.
Date: December 21, 1950
Creator: Newton, A. S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

A Low Voltage Ion Source

Description: Describes the investigation of a particular method of extracting ions from an arc. Experimental results of a low extraction voltage ion source are given in some detail.
Date: July 12, 1951
Creator: Foster, J. S., (John Stuart), 1890-1964 & Martina, Eugene F.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Technical Activities Report for April 1953

Description: Two xenon extraction runs were made this month. It appears that a small design change in Trap #2 will be necessary so that a dry ice-trichloroethylene slurry can be used for coolant rather than liquid freon. For each of the runs this month the enriched generator was exposed for four hours in the est pile operating at 100 watts. A period of eight hours for cooling and xenon builidup was allowed before the collection and separation runs were started.
Date: May 4, 1953
Creator: Faulkner, J. E.; Davenport, D. E. & Duvall, G. E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Identification of the Angular Inclusions Present in Rolled Uranium

Description: Hanford uranium contains minute angular inclusions which affect the microstructure, reactivity, and other important factors controlling the serviceability of the metal. Small quantities of the inclusions have been isolated by chemical means, and the x-ray diffraction patterns and chemical analyses of the isolated materials have been determined. As a first step in the identification of the inclusions present in rolled uranium, a search was made for a chemical method of separating the inclusion… more
Date: May 15, 1953
Creator: Scott, F. A.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Semi Works Studies for the Reduction of Corrosion-Product Impurities in UR-Plant UO3

Description: This report describes the work carried out in 321 Building semiworks equipment, to define the factors contributing to high corrosion-product contamination and presents recommendations for reducing the impurity level to meet current specifications (maximum of 200 parts total metals per million parts U).
Date: June 14, 1960
Creator: Amos, L. C.; Kirkendall, B. E. & Adler, K. L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Removal of Graphite from Aluminum Surfaces

Description: The first of two general methods are discussed based on the removal of the thin layer of aluminum to which graphite adheres. Two electro-polishing techniques, an electrolytic etch, an anodization-deanodication cycle and two chemical etches are described.
Date: June 30, 1953
Creator: Dillon, R. L. & Hodgson, W. H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

The Spectrophotometric Determination of Boron in Plutonium Using an Oxalate Separation

Description: An improved method for the determination of boron in plutonium is reported. Precipitation of plutonium (III) acid oxalate prior to color development with curcumin results in increased precision, greater speed, and lower costs. Results are presented of a statistical study involving all variables.
Date: June 25, 1953
Creator: Newell, Donald M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Spectrographic Analysis of Plutonium by the Thenoyltrifloroacetone Extraction Method

Description: Impurities are separated from plutonium solutions by means of TTA (thenoyltrifluoracetone) extractions. Plutonium in hydrochloric acid solution is reduced to the trivalent state with hydroxylamine, and some impurities are extracted into hezone or a solution of TTA in hezone. The organic phase is removed, and the plutonium in the aqueous phase is oxidized to the tetravalent state with nitric acid. Investigations of several variables which affect the extraction are described..
Date: June 29, 1953
Creator: Van Tuyl, H. H.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Monitoring Thermal and Resonance Neutron Flux

Description: The monitoring of thermal and resonance neutron flux in a thermal reactor having high flux over periods of time from 1 to 12 months using think Co foils is considered. Special attention is paid to the many correction factors to be applied to the activation data; neutron temperature, effective cadmium cutoff energy, burnout of Co59 and Co60, and decay of Co60. Results on a homogeneity test of 10 mil, 0.08% Co-A1 alloy foils is given.
Date: August 17, 1953
Creator: Heineman, R. E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Radiological Sciences Department: Quarterly Progress Report, Research and Development Activities, July-September, 1953

Description: This is the sixteenth quarterly report of the research and development activities of the Radiological Sciences Department, Hanford Atomic Products Operation, as before, includes some items charged to control but included for general interest. Such are identified as "not charged to research."
Date: October 2, 1953
Creator: Parker, H. M.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Interim Report of Nuclear Analysis Performed on SM-2 Core and Vessel : September 1, 1958 to December 31, 1959.

Description: Abstract: This technical report contains a description of the nuclear analysis performed upon the SM-2 core and vessel for the period September 1, 1958 to December 31, 1959. Calculations are given for core reactivity, power distributions, lifetime, reactor control, kinetics, radiation problems, fuel and poison burn-ups, and the nuclear effects of poisons, temperature, and geometry. Wherever possible, experimental data is included in order to test the validity of the analytical models. The SM-… more
Date: May 27, 1960
Creator: Bobe, P. E.; Birken, S. H.; Byrne, B. J.; Clancy, E. F. & Fried, B. E.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Analysis of Zero Power Experiments on SM-1 Core II and SM-1A Core I

Description: Abstract: An analysis of SM-1 Core II and SM-1A Core I zero power experiments was made by comparing these cores to each other and to AM-1 Core I on the basis of critical bank positions, bank calibrations and available chemical analyses of the fuel plate compositions. The effects of replacing boron absorbers by europium absorbers upon rod worth and stuck rod conditions were studied. Comparisons of measured and calculated power distributions were made. It was concluded that both SM-1 Core II an… more
Date: October 5, 1960
Creator: Paluszkiewicz, S.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Fission Product Activity in SM-1 Core I Primary System and Surface Contamination on SM-1 Type Fuel Elements. Task XVIII, Phases 2 and 3

Description: Abstract; The fission product data obtained during SM-1 Core I operation (June 1957 - May 1960) is reviewed briefly and interpreted. Evidence is presented to indicate that a fuel element defect was responsible for the high fission product activity level observed in the primary coolant. Relative escape coefficients are calculated and the defect size estimated. Anticipated fission product levels during SM-1 Core II and SM-1A Core I operation are estimated from alpha surface contamination data o… more
Date: February 28, 1961
Creator: Hasse, Robert A. & Zegger, John L.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for SM-1 Core Temperature and Flow Instrumentation (Task XIV) Covering Special Test Procedures.

Description: Abstract: Test procedures for special tests involving in-core SM-1 temperature and flow instrumentation are described (Task XIV Package Tests). These tests involve in-core steady state flow and temperature measurements, loss of flow transients, load transients, reduced primary system pressure operations and reduced element flow. The thermal and hydraulic conditions prevailing in these tests, including steady state and transient burnout rations, are developed. The effects of reduced system pres… more
Date: February 28, 1962
Creator: Bradley, P. L. & Coombe, J. R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
open access

Hazards Report for the SM-1 Core II With Special Components

Description: Abstract: This technical report describes the changes incurred in the SM-1 by the insertion of the SM-1 Core II and special components. The special components consist of impact specimens, a boron gradient rod, SM-2 elements, a PM-1-M element, and high burnup SM-1 Core I elements. The change in hazards, due to operation of SM-1 with Core II and the special components is evaluated. The analysis indicates there is no change in hazards.
Date: March 30, 1961
Creator: Coombe, J.; Lee, D.; Segalman, I. & Robertson, R.
Item Type: Refine your search to only Report
Partner: UNT Libraries Government Documents Department
Back to Top of Screen