UNT Libraries Government Documents Department - 526 Matching Results

Search Results

prev Results: 73 - 96 next
open access

Computerization of Welding Information

Description: From abstract: The Workshop on Computerization of Welding Information, sponsored by the National Bureau of Standards and the American Welding Institute, was held August 5-6, 1986 in Knoxville, Tennessee. Forty-two welding engineers, welding managers, and computer scientists gathered to discuss the necessity and design of databases for welding information. Each subject was introduced by specialists in that area.
Date: June 1988
Creator: Siewert, T. A. & Jones, J. E.
Item Type: Refine your search to only Report
open access

Computerizing Materials Data -- A Workshop for the Nuclear Power Industry

Description: Abstract: This report summarizes the recommendations of a Workshop in Computerized Materials Data as related to engineers in the Nuclear Power Industry. Four areas of discussion are featured: the content of a proposed data system; its size and data sources; the user interfaces and system capabilities; and ways of making further progress. In addition, changes in the use of materials data in the Nuclear Power Industry and progress-to-date in computerizing these data are presented.
Date: January 1985
Creator: Rumble, John, Jr. & Westbrook, Jack H.
Item Type: Refine your search to only Report
open access

Computers, Health Records, and Citizen Rights

Description: Report issued by the Bureau of Standards over studies on the benefits of computerized record-keeping. Medical records were chosen for the studies, and they also focus on patient privacy and rights. This report includes tables, and illustrations.
Date: December 1976
Creator: Westin, Alan F.; Baker, Michael A.; Annas, George J.; Silberberg, Richard; Broder, Jamie; Isbell, Florence et al.
Item Type: Refine your search to only Report
open access

Conductive Flooring for Hospital Operating Rooms

Description: Report issued by the Bureau of Standards over studies on the importance of conductive flooring in hospitals. Types of conductive flooring are compared, and tested. The methods and results are presented, and discussed. This report includes tables, illustrations, and photographs.
Date: March 21, 1960
Creator: Boone, Thomas H.; Hermach, Francis L.; MacArthur, Edgar H. & McAuliff, Rita C.
Item Type: Refine your search to only Report
open access

Construction of a Large Transverse Electromagnetic Cell

Description: Report issued by the U.S. National Bureau of Standards discussing the construction of large electromagnetic cells. As stated in the introduction, "this instruction provides information and procedures necessary to fabricate a large transverse electromagnetic (TEM) cell to be used for experimental "electromagnetic interference" (EMI) evaluation studies" (p. 1). This report includes illustrations, and photographs.
Date: February 1979
Creator: Decker, W. F. & Wilson, W. A.
Item Type: Refine your search to only Report
open access

Cooperative Measurements of Radio Fading in 1925

Description: Scientific paper issued by the Bureau of Standards over studies conducted on radio fading. As stated in the abstract, "the series of measurements on fading were devoted to studies of fading effects during the sunset period, effects during the solar eclipse of January 24, the fading variations throughout a 24-hour day, and the effects of high transmitting power on fading" (p. 419). This paper includes tables, maps, illustrations, and photographs.
Date: August 17, 1927
Creator: Dellinger, J. H.; Jolliffe, C. B. & Parkinson, T.
Item Type: Refine your search to only Report
open access

Cooperative Research Opportunities at NBS

Description: From page 5: Numerous opportunities exist for scientists and engineers from industrial professional trade and other organizations to collaborate in research at the National Bureau of Standards on projects of mutual interest. To accomplish its objective of supplying the measurement foundation for industry, science, and technology. NBS conducts research in many areas, including advanced ceramics, automated manufacturing, opto-electronics, and biotechnology.
Date: 1986
Creator: United States. National Bureau of Standards.
Item Type: Refine your search to only Report
open access

Corrected Optical Pyrometer Readings

Description: Report presenting a table of corrected optical pyrometer readings which enables optical pyrometer users to convert observed temperature immediately to the true temperature, if the effective emissivity of the material being observed is known. The table gives observed temperatures from 1,000 to 3,000ºK in increments of 5 degrees, from 3,000 to 5,000ºK in increments of 10 degrees, from 5,000 to 10,000ºK in increments of 50 degrees, and from 10,000 to 39,900ºK in increments of 100 degrees. For thes… more
Date: April 21, 1961
Creator: Poland, D. E.; Green, J. W. & Margrave, J. L.
Item Type: Refine your search to only Report
open access

Corrosion and Protection of Steel Piles in a Natural Seawater Environment

Description: From Introduction: "This paper describes some results of the first eight years of a fifteen year program in which a variety of coating and catholic protection systems are evaluated on their ability to protect steel piles in offshore conditions at Dam Neck, Virginia. It includes a description of the methods used in the evaluation and the results found on these systems."
Date: June 1977
Creator: Escalante, E.; Iverson, W. P.; Gerhold, W. F.; Sanderson, B. T. & Alumbaugh, R. L.
Item Type: Refine your search to only Report
open access

Corrosion of Steel Pilings in Soils

Description: From Introduction: "In this paper are presented the results obtained to date from the inspections of steel pilings. The investigation will be continued by additional inspections of pilings in other parts if the country in order to cover a wider range of soil environments."
Date: October 24, 1962
Creator: Romanoff, Melvin
Item Type: Refine your search to only Report
open access

Creep and Drying Shrinkage of Lightweight and Normal-Weight Concretes

Description: From Scope of Investigation: "The work reported here is part of a continuing program concerning the long-term volume changes in concretes made from lightweight and normal-weight aggregates. The creep, drying-shrinkage, and strength data presented are for concretes made with 24 expanded shale lightweight aggregates and 5 natural, normal-weight aggregates. These aggregates were from widely separated geographical locations and were to be representative samples of aggregates being used in the produ… more
Date: March 4, 1964
Creator: Reichard, T. W.
Item Type: Refine your search to only Report
open access

Criteria for the Installation of Energy Conservation Measures

Description: From abstract: Standard installation practices were developed to assist in assuring the effectiveness and safety of energy conservation measures installed under the Residential Conservation Service (RCS). They serve as mandatory standards under RCS but are recommended guides for all installations of the covered materials and products. The criteria are being used by DoE to develop training manuals for installers, inspectors, and energy auditors.
Date: July 1981
Creator: Trechsel, Heinz R. & Launey, Shelia J.
Item Type: Refine your search to only Report
open access

CRPL Exponential Reference Atmosphere

Description: From Introduction: "In this monograph, the background of the exponential reference atmosphere will be outlined and a set of radio ray tracings presented. These ray may be used for the solution of many problems involving refraction by means of the exponential reference atmosphere."
Date: October 29, 1959
Creator: Bean, B. R. & Thayer, G. D.
Item Type: Refine your search to only Report
open access

Cryogenic Fluids Density Reference System: Provisional Accuracy Statement (1980)

Description: Abstract: The improved Density Reference System, the reference densimeter, and the method of determining sample density are described. The uncertainty of the density reference system is + 0.055%. The contribution from the estimated systema -ic error in density was + 0.022%. The estimated uncertainty caused by random error is three times the standard deviation of 0.011% and is based on sixty-three measurements of the densities of saturated liquid methane. The total density uncertainty is taken t… more
Date: April 1981
Creator: Siegwarth, J. D. & LaBrecque, J. F.
Item Type: Refine your search to only Report
open access

Curves of Input Impedance Change Due to Ground for Dipole Antennas

Description: Report presenting graphs of the change in input impedance of electrically short dipole antennas in the presence of an isotropic and homogeneous ground which considers four types of antennas: horizontal and vertical, electric and magnetic dipoles. Curves of the change in both the input resistance and reactance are shown for a wide range of values of the frequency, antenna height above the ground, and electromagnetic ground constants.
Date: January 31, 1964
Creator: Vogler, L. E. & Noble, J. L.
Item Type: Refine your search to only Report
Back to Top of Screen