UNT Libraries Government Documents Department - 93 Matching Results

Search Results

prev Results: 41 - 64 next
open access

Liquid-in-Glass Thermometry

Description: Report containing information of general interest to manufacturers and users of liquid-in-glass thermometers. This report supersedes Monograph 90. Instructions explaining how to submit a thermometer to the National Bureau of Standards for calibration are provided, and the techniques and equipment, such as stirred liquid comparison baths, used in the calibration procedures are described. A discussion of important principles of acceptable thermometer design and factors affecting their use is incl… more
Date: January 1976
Creator: Wise, Jacquelyn A.
Item Type: Refine your search to only Report
open access

Mass and Mass Values

Description: Report discussing the different bases for determining mass values and instances where these differences may be crucial. The first part is a historical summary of weighing, standards, and the assignment of value; and the interfacing of mass measurements with civilization. The second part discusses in detail the methods of assigning mass values. Ways to convert from values on one basis to values on another basis are discussed.
Date: January 1974
Creator: Pontius, Paul E.
Item Type: Refine your search to only Report
open access

Measurement Assurance for Gage Blocks

Description: Report discussing the philosophy of measurement assurance and the three levels of measurement assurance programs. The measurement assurance programs are outlined to show how control over the measurement process can be maintained and how the offset (or systematic error) from the unit of length maintained by the National Bureau of Standards ban be made negligible. This monograph is intended for those who need to know on a continuing basis the uncertainty of their gage block calibration procedure.
Date: February 1979
Creator: Croarkin, Carroll; Beers, John & Tucker, Clyde
Item Type: Refine your search to only Report
open access

Measurement Assurance Program - A Case Study: Length Measurements. Part 1. Long Gage Blocks (5 in to 20 in)

Description: From Abstract and Introduction: "This paper is, in essence, a report on the extension of the techniques first suggested in NBS Monograph 103 "Realistic Uncertainties and the Mass Measurement Process" to the area of length measurement. This paper covers the progress to date on the long gage blocks (from 5 to 20 in the length). The purpose of this purpose is to verify the closure between the "old" process and the "new" process, and to describe the present "points of departure" upon which some of … more
Date: November 1975
Creator: Pontius, Paul E.
Item Type: Refine your search to only Report
open access

The Measurement of Lumped Parameter Impedance: A Metrology Guide

Description: Scope of the Guide: "This guide is not all-inclusive of the subject of impedance measurement and the reader should understand at the outset what he can or cannot expect to find. To help in establishing the bounds of subject matter included, consider the ideal impedance-measuring instrument as having the following the characteristics and capabilities: (1) unrestricted frequency range (2) unrestricted impedance range (3) unrestricted capabilities with respect to bias, ambience, applied power, etc… more
Date: June 1974
Creator: Jones, R. N. & Anson, W. J.
Item Type: Refine your search to only Report
open access

The Mechanics of Pneumatic Tires

Description: From Abstract: "This treatise is an attempt to provide a rational descriptive and analytical basis for tire mechanics. Chapters of this book are contributed by active research workers in the fields of rubber and textile properties, friction, material properties, tire stress problems, tire design and construction, vehicle skid and handling, and tire mechanical properties."
Date: November 1971
Creator: Clark, Samuel K.
Item Type: Refine your search to only Report

NBS Metric Kit: Official Metric Information

Description: Kit issued by the U.S. National Bureau of Standards containing materials regarding conversion to the metric system of measurement. The kit includes a letter of introduction; an order form; two plastic cards printed with rulers and conversion information; and four booklets that discuss how the metric system is different from the English system of measurement, why America should switch, and reference materials for converting.
Date: 1977?
Creator: United States. National Bureau of Standards.
Item Type: Refine your search to only Collection
open access

The Nicrosil versus Nisil Thermocouple: Properties and Thermoelectric Reference Data

Description: From Abstract: "This monograph deals with the formulation and development of the new highly stable nickel-base thermocouple alloys Nicrosil (Ni-14.2Cr-1.4Si) and Nisil (Ni-4.4Si-0.1Mg) under the leadership of the Materials Research Laboratories (MRL) of the Australian Government of Defence, and their standardization by the National Bureau of Standards (NBS) of the U.S. Department of Commerce."
Date: April 1978
Creator: Burley, Noel A.; Powell, Robert L.; Burns, George W.; Scroger, Margaret G.; Burns, George W. & Scroger, Margaret G.
Item Type: Refine your search to only Report
open access

Photonuclear Reactions

Description: Report discussing photonuclear reactions in the approximate energy range 10 to 30 MeV. Various sum rules are discussed and applied to experimental data. Several different theories are described and their predictions compared with experiment, and as often as possible open questions and discrepancies are pointed out.
Date: August 1970
Creator: Hayward, Evans
Item Type: Refine your search to only Report
open access

Platinum Resistance Thermometry

Description: From Introduction: "This monograph describes the calibration of standard platinum resistance thermometers at the NBS including the equipment, techniques, and procedures."
Date: April 1973
Creator: Riddle, John L.; Furukawa, George T. & Plumb, Harmon H.
Item Type: Refine your search to only Report
open access

Properties of Glasses in Some Ternary Systems Containing BaO and SiO2

Description: Report discussing the glass forming regions in six ternary oxide systems containing BaO, Si02, and a third oxide. The properties of the resulting glasses were measured and the results reported. The data on refractive indices, dispersions, and specific volumes were evaluated by computer methods in an attempt to identify "substructures" containing the cations present in the glasses.
Date: September 1973
Creator: Cleek, Given W. & Babcock, C. L.
Item Type: Refine your search to only Report
open access

Recommended Practice for the Use of Metric (SI) Units in Building Design and Construction

Description: Report issued by the U.S. National Bureau of Standards discussing the use of metric units of measurement during construction. As stated in the scope, "this document outlines a selection of SI units, with multiples and sub-multiples, for general use in building design and construction" (p. 1). This report includes tables, and illustrations.
Date: April 1977
Creator: Milton, Hans J.
Item Type: Refine your search to only Report
open access

Reference Tables for Low-Temperature Thermocouples

Description: Report discussing the completed experimental program of the low-temperature reference tables for the commonly used thermocouples. Details of the experimental system, instrumentation, data analysis, error analysis, and materials tested are given in order to allow the user to better evaluate and apply the results.
Date: June 1972
Creator: Sparks, Larry L.; Powell, Robert L. & Hall, William J.
Item Type: Refine your search to only Report
open access

Relativistic Many-Body Bound Systems: Electromagnetic Properties

Description: Report presenting the formulae for the calculation of the electron scattering form factors, and of the static magnetic dipole and electric quadrupole moments, of relativistic many-body bound systems. The framework, given in NBS Monograph 147, is relativistic quantum field theory in the Schrodinger picture ; the physical particles, i.e. the solutions of the interacting fields, are given as linear combinations of the solutions of the free fields, called the parton fields. The parton-photon intera… more
Date: April 1977
Creator: Danos, Michael & Gillet, Vincent
Item Type: Refine your search to only Report
open access

Research and Development in the Computer and Information Sciences: [Part] 1. Information Acquistion, Sensing, and Input: A Selective Literature Review

Description: From Introduction: "This report is the first of a series intended to provide a selective overview of research and development efforts and requirements in the somewhat overlapping fields of the computer and information sciences and technologies. The projected series of reports will attempt to outline the probable range of R & D activities in the computer and information sciences and technologies through selective reviews of the literature and to develop a reasonable consensus with respect to the… more
Date: March 1970
Creator: Stevens, Mary Elizabeth
Item Type: Refine your search to only Report
open access

Research and Development in the Computer and Information Sciences: [Part] 2. Processing, Storage, and Output Requirements in Information Processing Systems: A Selective Literature Review

Description: From Introduction: "This is the second in a series of reports concerned with research and development requirements and areas of continuing concern in the computer and information sciences and technologies."
Date: May 1970
Creator: Stevens, Mary Elizabeth
Item Type: Refine your search to only Report
open access

Research and Development in the Computer and Information Sciences: [Part] 3. Overall System Design Considerations: A Selective Literature Review

Description: From Introduction: "This is the third in a planned series of reports involving selective literature reviews of research and development requirements and areas of continuing R & D concern in the computer and information sciences and technologies."
Date: June 1970
Creator: Stevens, Mary Elizabeth
Item Type: Refine your search to only Report
open access

The Role of Standard Reference Materials in Measurement Systems

Description: Report is a guide to Standard Reference Materials (SRM's) and should be useful to all users of SRM's particularly those in countries developing national measurement systems. It is not intended to be an exhaustive description of the NBS-SRM program, but rather a review of the role SRM's play in the measurement system, how SRM's are certified, and what the certification means. To illustrate the use of SRM's, several selected industries are described in which SRM's have made significant contributi… more
Date: January 1975
Creator: Cali, J. P.; Mears, T. W.; Michaelis, R. E.; Reed, W. P.; Seward, R. W.; Stanley, C., L. et al.
Item Type: Refine your search to only Report
Back to Top of Screen